Something struck us the other day when thinking about the variety of 3D printing approaches. Traditional manufacturing is typically “subtractive”, in that you take a large chunk of material, say a granite cube, length of wood or a 17 tonne cube of solid titanium and go at it with tools, manual or automated. When the smoke clears, material has been “subtracted” from the original object to “reveal” the final item. Interestingly, Michelangelo believed every stone had a sculpture hidden within it echoing this process.
Subtractive manufacturing can be wasteful. Consider the titanium cube that might be milled down to a final object comprised of only 10% of the original cube’s mass. Sure, you might be able to recycle the shaved-off bits, but that’s not going to be efficient.
Step forward to the 21st century where we have “Additive” manufacturing. In this approach there is no original material to subtract from. Instead, we simply deposit new material in an “additive” way to gradually build up an object from nothing. We do this with extruders, laser sintering, powder fusing and other approaches. But they are all additive.
Or are they?
Consider the case of Solido and MCOR, who use sheet-based additive manufacturing approaches. In this approach, a flat sheet represents a layer that is added. Then the machine removes (subtracts?) the areas of the sheet that are not required. The question then is, are MCOR and Solido additive or subtractive? We think they are both because they add layers, but subtract from each layer.
To print on one of these machines you must visualize the input material: a stack of sheets, plastic or paper. Your object has to be contained within that stack. So like Michelangelo, we believe every stack has an object hidden inside. Even pancakes.
Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Kerry Stevenson, aka "General Fabb" has written over 8,000 stories on 3D printing at Fabbaloo since he launched the venture in 2007, with an intention to promote and grow the incredible technology of 3D printing across the world. So far, it seems to be working!
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.