Research May Lead to Low Cost 3D Metal Printing

Research on aluminum 3D printing has discovered ways to potentially lower operational costs. 

There are complete 3D printing systems that print in solid metal, but they are frighteningly expensive. There have been some developments in lower cost open source metal 3D printers that we’ve previously reported, but difficulties remain. 

Even if you solve the printing problems, you’re still left with a big issue: removing prints from the substrate typically requires access to pricey metal cutting equipment not typically found in home workshops. 

The researchers, from Michigan Technological University, developed techniques to overcome this. They explain in their research paper: 

This article investigates several substrate treatments to provide a low-cost method to easily remove 3D-printed 1100 aluminum parts from a reusable substrate. Coatings of aluminum oxide and boron nitride on 1100 aluminum and A36 low-carbon steel substrates were tested. Lap shear tests were performed to assess the interlayer adhesion between the printed metal part and the print substrate. No warping of the substrate was observed during printing. It was determined that boron nitride-coated low-carbon steel provided the lowest adhesion strength. Printing aluminum on uncoated low-carbon steel also allowed easy removal of the aluminum part with the benefit of no additional coating steps or costs.

There are a great many barriers to practical metal 3D printing in consumer workshops, but it appears there’s one less now. 

Via Liebert (article free until 10 March 2015)

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

Related Articles

Keep up to date on 3D Printing technologies

We're learning a lot about 3D printing, and So will you.

Subscribe to our mailing list and make better 3D print decisions.