High Efficiency Solid State Cooling Made Through Additive Manufacturing

By on December 2nd, 2019 in research

Tags: , ,

 Scanning electron microscope view of a 3D printed cooling element [Source: AAAS]
Scanning electron microscope view of a 3D printed cooling element [Source: AAAS]

Researchers have developed a unique method of 3D printing highly efficient solid state cooling components.

Cooling is one of the major consumers of energy throughout our world, and any method of making it more efficient will certainly be welcomed. There are currently only two major approaches for cooling.

Vapor Compression Cooling

One is the very familiar vapor compression technology that is certainly found in your fridge. This is a technology thatā€™s quite old, having first been implemented in 1834 by Jacob Perkins! Since that time the technology has been gradually improved, but at this point it is unlikely it could yield further efficiencies due to the maturity of the process.

Solid State Cooling

The other method of cooling is solid state, which is comprised of several approaches, including thermoelectric, radiative and caloric. That last method is of interest here.

The caloric techniques could in theory be much more efficient than vapor compression, but current methods donā€™t work. They explain:

ā€œHowever, hysteresis in the properties is caloric materialsā€™ Achilles heel because hysteresis represents work lost in every heat-pumping cycle as dissipated heat.

Hysteresis also ultimately leads to material fatigue and failure. Although the long-term fatigue properties are critical for developing applications for caloric materials, evaluating these properties over a large number of cycles is not common.ā€

3D Printed Cooling Elements

To counteract this effect, the researchers designed a 3D printable concept that dramatically reduced hysteresis.

They were able to 3D print the necessary microstructures using a powder bed / laser system in a nickel-titanium alloy. The resulting cooling mechanism was able to withstand a million cycles, potentially making this a practical approach.

Should this technology be successfully commercialized, we could see not only simplified and longer-lasting cooling mechanisms in our homes and appliances, but also a corresponding reduction in energy use.

Via AAAS

By Kerry Stevenson

Kerry Stevenson, aka "General Fabb" has written over 8,000 stories on 3D printing at Fabbaloo since he launched the venture in 2007, with an intention to promote and grow the incredible technology of 3D printing across the world. So far, it seems to be working!