Thought 3D has been expanding the capabilities of their Drywise system.
Formlabs today announced an automated manufacturing system that leverages their 3D print technology.
A company has launched an accessory to post process resin 3D prints and recycle the solvent!
3D printing at scale just might get a lot simpler with AM-Flow’s automation solution.
I had a chat with the friendly folks at DyeMansion about their latest system.
I had the opportunity to check out Multec’s amazing six-filament extrusion solution.
Sculpman’s variable nozzle is among the most interesting technologies we saw at Formnext.
I’m looking at an interesting open source hardware project, the ReCreator 3D.
I had a look at Slice Engineering’s highly unusual Mosquito Conduct hot end, and was surprised to find it doesn’t need a fan.
Rivelin Robotics showed their amazing metal 3D print post processing station to us last week.
Xioneer announced a new dyeing system, The Vortex EZ.
Raise3D announced an upgrade kit for their Pro3 series that dramatically increases print speed.
A new Kickstarter project hopes to make Prusa MINI 3D printers a great deal better.
Formlabs announced a set of finishing tools that could be very useful for anyone 3D printing.
Artec 3D released a new system that is quite different from their traditional equipment.
Plasmics launched a hot end with an entirely new heating concept: induction.
Charles R. Goulding looks at a new technology for concrete quality control and whether it should be used in construction 3D printing.
Prusa Research announced a new beta version of their 3D printer firmware that takes a more sophisticated approach to thermal management.
Shining 3D announced a new and very affordable handheld 3D scanner, the Einstar.
Rivelen Robotics provides a very interesting metal post processing solution for production.
peel 3D announced a new handheld 3D scanner: the peel 3.
Lynxter announced a new direct drive toolhead, the FIL21.
UpNano announced a new feature that will increase the precision of their two photon 3D printing system.
Printerbox 3D announced a new 3D print accessory that’s quite interesting.
We took a look at the ENESKApostpro workstation.
Dyze Design has some interesting new hardware.
A most interesting 3D printer experiment could show how desktop 3D printers may work in the future.
E3D has been making progress with their updated product set.
Charles R. Goulding and Andressa Bonafé look at NVIDIA’s contribution to 3D design and 3D printing.
I took a closer in-person look at Thought3D’s new Drywise filament drying solution.
A new method of continuous 3D printing has been developed.
Xioneer announced the “Vortex EZ”, a powerful post processing device for advanced FFF 3D printing.
SHINING 3D has developed a very unusual 3D scanner.
The folks at Proper Printing YouTube channel decided to combine FFF and SLA 3D printing processes, with interesting results.
An intriguing post online suggests the development of an end-to-end post processing resin 3D printing device is underway.
A new nozzle for FFF 3D printers has been announced by fibtip, and it seems to have all the right characteristics.
Ultimaker announced the “Ultimaker Metal Expansion Kit”, which enables metal 3D printing on their S5 model.
I saw the biggest removable print plate ever.
I had a chat with DyeMansion and learned they can now post process polypropylene parts.
We gave the new Anycubic Airpure a test in our lab.
Did you know that Creality also makes laser engravers?
Prusa Research announced the availability of a new, sophisticated enclosure for their popular MK3S+ 3D printer.
Admatec announced a new furnace that could enable their clients to take on additional production of 3D printed ceramics.
Vlare is shaking up the world of resin 3D printing.
I spoke with Nick Stratton, the fellow behind Hotends.com about their recent activities.
Wait, a removable plate for resin 3D printers?
A very unusual design for a 3D print extruder has been patented.
E3D-Online published a revealing video showing many more details and capabilities of their new Revo system.
Researchers at Imperial College London have devised a relatively inexpensive system to provide 5-axis 3D printing capability.
The shift from prototyping to production implies a great deal more automation must take place in 3D printing.
YouTuber Atomic14 somehow converted a Creality 3D printer to a Wordle-solving robot.
Our testing of the CR-Scan Lizard 3D scanning system from Creality continues with post-scan processing and our summary.
Our testing of the CR-Scan Lizard 3D scanning system from Creality continues with turntable and handheld modes and software.
We were able to obtain a CR-Scan Lizard 3D scanning system from Creality and performed some testing.
A German-Ukrainian startup has developed a new system for not only 3D printing, but multifunction manufacturing.
Modix announced two interesting new add-ons for their large-format 3D printers.
3D print enclosures are a common homebuilt accessory, but how do you know you’re doing it correctly?
AM Ventures announced an investment in startup Scrona AG. But what’s so important about this company?
Artec 3D announced the 2022 Leo handheld 3D scanner, which seems to be vastly improved over the previous model.
Minifactory announced a tool for 3D printers I hadn’t seen previously: a Nozzle Alignment Camera.
E3D-Online’s new Revo product set should make life far easier for FFF 3D printer operators.
HK BIQU Technology Co., Limited has released a rather interesting control board designed for 3D printers, the BTT SKR Pico.
Thought3D announced a very unusual in-line filament drying system they call “Drywise”.
MakerBot announced their new air filtration system has been awarded GREENGUARD certification by UL.
Dyemansion introduced a new “Black Line” for 3D print coloring.
AMT introduced a new line of highly advanced post processing devices for additive manufacturers, the SF Series.
Laser marking is a popular, efficient, and highly safe process that has allowed for a wide range of markings to be created on many types of materials.
BOFA announced a new device specifically designed for high temperature 3D printing.
Mosaic Manufacturing announced they’re now shipping their latest hardware, the Palette 3 and Palette 3 Pro.
Formlabs announced two new machines to complement their larger 3D printers.
In an unusual online announcement, Ultimaker revealed an upcoming cleaning station.
3DQue announced the availability of their 3D printer automation system for several new 3D printer models.
Meltio announced their first client for the hybrid CNC system announced last year.
Xaar announced the new Irix printhead for high-speed printing.
Tupel 3D added a dental 3D scanner to their Kickstarter offering.
BOFA’s new AM 400 fume extraction device includes a new safety feature designed specifically for additive manufacturing operations.
3DQue announced the results of an internal study exploring ways to inexpensively 3D print metal objects.
Wemake answered our questions regarding their prototype belt ejection system for desktop 3D printers.
DyeMansion announced a new food safe capability for their VaporFuse process, and several corporate advancements.
Mayku today announced a new device, the Multiplier.
XJET announced “SMART”, an intelligent post-processing workstation.
I’ve come across another method for automating 3D printing: the Automatic Ejection System by Wemake.
A new tabletop 3D scanner is about to provide outstanding scanning performance at a very low price.
Intel announced it is exiting the RealSense depth camera business.
FAME 3D announced yet another toolhead for the LulzBot line of 3D printers: the H175.
Ultimaker announced a significant update for their CC print core.
A method of converting the popular Ender 3 desktop 3D printer to a color printer has been published.
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. Here we review several sample 3D scans taken with the device.
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. We examine the operation of the device.
Artec 3D provided us with a Leo 3D scanner, so we put it through some tests. First let’s look at features and setup.
Digital Metal announced an accessory for their popular DM P2500 high-resolution metal 3D printer.
3DEVO announced an unusual accessory for their thermoplastic recycling system, the GP20 Hybrid Shredder/Granulator.
3DQue announced a new version of their Quinly continuous 3D printing system for Prusa equipment.
Prusa Research released version 3.10.0 firmware for their flagship line of 3D printers.
PrintDry announced a new filament storage system that’s powered by automated vacuum technology.