AON3D Launches New Industrial 3D Printer: The AON-M2 2020

, AON3D Launches New Industrial 3D Printer: The AON-M2 2020
The AON-M2 2020 industrial 3D printer [Source: AON3D]

Montreal-based AON3D launched their most powerful industrial 3D printer yet, the AON-M2 2020. 

AON3D has been producing powerful 3D printers for a few years now, and recently their focus has been on the ability to handle high temperature materials. These materials are sought by engineers and designers due to their stronger physical properties and thus usable as not only prototypes but actual end-use parts. 

But a high temperature ability doesn’t just mean cranking up the energy levels on the 3D printer’s heaters. High heat levels causes all kinds of issues that affect 3D print quality, and that’s the name of the game here: if you cannot produce high quality parts, then it doesn’t matter if your equipment is “high temperature”.

It seems, though, that AON3D has taken a number of steps to ensure the parts coming out of the new AON-M2 2020 are of the highest calibre. 

They say they’ve done the following in the new device: 

  • All stainless-steel frame to minimize thermal expansion

  • Heater redesign to ensure precise control

  • Ability to heat chamber to operating temperature in only 15 minutes

  • Higher chamber temperatures up to 135C

  • Higher bed temperatures up to 200C

  • Higher nozzle temperatures up to 470C

, AON3D Launches New Industrial 3D Printer: The AON-M2 2020
3D printed part made in the AON-M2 2020 [Source: AON3D]

These measures are quite important because the AON-M2 2020’s build volume is quite large at 454 x 454 x 640 mm. Thermal effects are often amplified by larger parts as the warps and stretches can be carried through longer dimensions. 


But it appears that AON3D has overcome these challenges as the 3D printed parts emerging from the new AON-M2 2020 seem to be of excellent quality. 

, AON3D Launches New Industrial 3D Printer: The AON-M2 2020
ULTEM 9085 3D printed part made in the AON-M2 2020 [Source: AON3D]

You might be wondering about the materials used in the AON-M2 2020, and I can tell you the machine is purposely designed as an “open materials” device able to handle any material you wish to put into it. However, “any” material will require some thought and experimentation with 3D printing parameters to ensure proper quality output. 

AON3D has worked with several notable providers of high temperature 3D printer materials to avoid this issue. Their work with Solvay, SABIC, Kimya, DSM, Infinite Material Solutions and “many others” has resulted in a wide set of 3D print parameters that can ensure quality results without much or any testing. 

The new AON-M2 2020 is available now and is shipping. 

Via AON3D

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Reply

Email us

Keep up to date on 3D Printing technologies

We're Learning a lot about 3D printing and So will you

Subscribe to our mailing list and make better 3D print decisions