DIY Car Manufacturing?

Bob McCarty predicts that:
within the next 10 years, begin designing and manufacturing their very own vehicles using in-home three-dimensional printing systems, services and consumables.
That’s a tall order, given that a 3D printing is still a toddler among technologies. We suspect it may eventually come to the point he describes, but it might be longer than ten years out. Here are some issues that really have to be overcome before you’re punching out your own Toyota-Mini-SUV-Roadster:
  • The robustness of 3D printed materials is not great. Today we’re just beginning to see a shift from the “it looks great but for God’s sake don’t touch it!” stage to the “It might work in a mechanical toy for a short while” stage. We’d have to see substantial improvements in materials before we’d be cruising safely
  • Build chamber sizes are smaller than many car components. Certainly you can print a cup holder, but a 4×5 ft smooth door panel? You can print components and assemble them, but there are quite a few car components that likely need substantially larger build chambers
  • Some assembly required. Today one can imagine many car parts being printed, and even robust ones in the very near future. But exactly how would they be put together into a complete, tested, functional and safe auto? Today’s 3D print scenario would require carbon-based units take the parts and put them together manually. Not quite the envisioned “Touch to Buy” activity. You’d need a stage with robots capable of assembling parts into arbitrary car models
  • And then there’s the design itself. Even designing a great cup holder requires a fair bit of skill and design talent. A car would be far beyond, well, almost everyone’s skills. You’d have to provide a massive catalog of interoperable pre-designed and tested components, and the buyer would merely be choosing various combinations of them
It certainly won’t be easy achieving in-home car printing. But let’s examine what we just said above: Ultra-robust parts, created in large build chambers, assembled by robots and/or humans in a centralized facility with customers selecting component combinations from a simplified list prepared by professional designers and engineers. Say, doesn’t that sound an awful lot like the auto industry of today?

Via Bob McCarty Writes 

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

Related Articles

Keep up to date on 3D Printing technologies

We're learning a lot about 3D printing, and So will you.

Subscribe to our mailing list and make better 3D print decisions.