
QIDI announced their 3D printer for kids, the MakeBuddy Smart5.
It seems we have a bit of a competition here, with Creality announcing their mBox recently, too. Both devices are attempting to address the holiday market for children’s 3D printers.
The key specs for the MakeBuddy Smart5 are:
- Build volume of 180 x 180 x 180 mm
- 1.75mm filament
- 0.4mm nozzle
- Print speed “up to” 600mm/s
- HEPA+Carbon filtration
- Fully automated calibration
- AI image-to-3D capability
- Cold plate
- PLA only printing
The specs for the Smart5 are surprisingly similar to Creality’s mBox. However, here the Smart5 has a bigger build volume, HEPA filtration, and apparently faster print speeds. But it does cost US$20 more than the mBox, coming in at US$349.
The print speed could actually matter here. Normally, 3D printers take a long time to produce output, and adults understand this. Often items are printed overnight, and we really don’t care how long it takes, unless it is a production situation.
But in the case of kids printing, it could be a different story. Kids can be quite impatient (ask me how I know this).
A kids’ 3D printer that produces output faster might be quite a bit more desirable than a slower printer. Kids wait less, print more.

One complaint I might have about the Smart5’s presentation is that many of the models shown are multicolor prints. That is not possible on the stock Smart5, which would print in a single color only. For these to be produced, the kid operator would have to print a pile of parts and glue them together, or paint a single-colored print.
That could be one reason why four spools of filament are included with the Smart5, and that is different from the competition. This could also be a selling point for parents looking for a solution that they don’t quite understand: everything they need is in a single purchase transaction with the Smart5.
There is another possibility: it is apparently possible for the Smart5 to be connected to the QIDI Box, a filament swapper. This would unlock the ability to print in up to four colors, but would cost parents another US$228 — for a total of US$577.
It seems that several manufacturers are now pursuing the kid 3D printing market, and the QIDI MakeBuddy Smart5 seems like a pretty decent choice.
Via QIDI
