3D printing the seating of the future isn’t just getting personal, it’s sustainable.
Design
Design of the Week: Solar System Mini Set
This week’s selection is the Solar System Mini Set by AstroReality.
Design of the Week: Windmill-Powered Music Box
This week’s selection is the practical Windmill-Powered Music Box by designer Niklas Roy of Berlin.
Design of the Week: Hychair
This week’s selection is the Hychair by Thiele + Wagner.
Design of the Week: Marble Clock
This week’s selection is the smooth Marble Clock by Görkem Bozkurt.
Design of the Week: Smart Slab
This week’s selection is the amazing Smart Slab concrete ceiling by the DFAB House project.
Design of the Week: PeakBoil
This week’s selection is the highly unusual PeakBoil by students at ETH Zurich.
Design of the Week: Dr. Brain Breaker
This week’s selection is the fun Dr. Brain Breaker by MyMiniFactory contributor Thomas Buseyne.
Behind the Design: Mathematical Artist Henry Segerman
For many of us, math wasn’t exactly our strongest subject back in school
Design of the Week: Exoskeleton Hands
This week’s selection is the fun Exoskeleton Hands by Melbourne-based 3D designer Alex Czech.
Design of the Week: Mechanical Laser
This week’s selection is the unusual Mechanical Laser project by Thingiverse contributor Evan S.
Design of the Week: Low Poly World Map
This week’s selection is the decorative Low Poly World Map by Richard Fickert.
Design of the Week: ABSDBS
This week’s selection is the incredible ABSDBS telescope project by Aleksej Cherenkov.
Design of the Week: Puzzle Cube
This week’s selection is the oddly satisfying Puzzle Cube by WildRoseBuilds.
Design of the Week: Emptiness of Shark
This week’s selection is the massive Emptiness of Shark by artist Michael Cardacino.
Design of the Week: Moon
This week’s selection is the fun “Print Your Own Moon” by Instructables contributor 陳亮 (Liang Chen).
Design of the Week: iCableGuards
This week’s selection is the enormously useful iCableGuards by Pinshape contributor Sergio Romero.
Design of the Week: Voronoi Flower Lampshade
This week’s selection is the finely detailed Voronoi Flower Lampshade by designer Felicity Anne Holbrow.
Design of the Week: 3D Printed Firepit
This week’s selection is the fun 3D printed fire pit by builder Ben Uyeda of Homemade Modern.
A 3D Printing Lesson From Jewelry Designers To Industry
I’m reading an interesting story of how jewelry designers applied a new 3D printing technology.
Design of the Week: Temperature Tower
This week’s selection is the very useful Temperature Tower by Simplify3D.
Design of the Week: Bounce Necklace
This week’s selection is the animated Bounce Necklace by wearable art desginer Donna Mason Sweigart.
Design of the Week: Planetary Rover
This week’s selection is the inspiring Planetary Rover project by Instructables contributor silver-surfer.
Design of the Week: The Root Cause
This week’s selection is the highly detailed “Root Cause” by artist Michael Cardacino.
Design of the Week: Šibenik Cathedral
This week’s selection is the beautiful 3D print of the Šibenik Cathedral of St. James by i.Materialise.
Design of the Week: Orbit
This week’s selection is “Orbit”, the amazing set of animated spinning tops by designer Tor Robinson.
Design of the Week: Card Holder
This week’s selection is the minimalist Card Holder by Elia Furgiele.
Design of the Week: Oxygene Tire
This week’s selection is the radical Oxygene EV tire design by Goodyear.
Design of the Week: Earhooks
This week’s selection is the very practical Earhooks by Thingiverse contributor Erick Brown, a.k.a “digitalrice”.
Design of the Week: Desktop CT and 3D Scanner
This week’s selection is the detailed Desktop CT and 3D Scanner by Instructables contributor JBumstead.
Design of the Week: Liquid Drops
This week’s selection is the fascinating Liquid Drops by YouMagine contributor Tiago Charters de Azevedo.
Design of the Week: A Round 2IT
This week’s selection is the hilarious Round 2IT by Thingiverse contributor Adam Haley.
Design of the Week: Ball in a Box
This week’s selection is the iconic Ball in a Box design by Pinshape contributor Print That Thing.
Design of the Week: DIY Sneaker
This week’s selection is the incredible 3D printed DIY Sneaker by Georg Simon Ohm.
Design of the Week: Starman
This week’s selection is the highly appropriate Starman 3D model by Thingiverse contributor Stephen Graybill, a.k.a Oranhunter.
Design of the Week: Low Poly Figure
This week’s selection is the interesting Low Poly Figure by designer Wesley Millora.
Design of the Week: Sinewave Vase Generator
This week’s selection is the easy-to-use Sinewave Vase Generator by YouMagine contributor Peetersm.
Design of the Week: Hand-Screw Clamp
This week’s selection is the carefully designed Hand-Screw Clamp by industrial designer Jacob Stanton.
Design of the Week: Disentanglement Puzzle
This week’s selection is the non-intuitive Disentanglement Puzzle by YouMagine contributor M. Ingle.
Design of the Week: Wristband Funnel
This week’s selection is the practical Wristband Funnel by Tim Postma.
Design of the Week: “At Hand”
This week’s selection is the “At Hand” 3D printed tactile display in Modena, Italy.
Design of the Week: Missile Toe
This week’s selection is the gag Missle Toe by Thingiverse contributor Humberto Lopez.
Design of the Week: Chubby Chair
This week’s selection is the stackable Chubby Chair by Dirk Vander Kooij.
Design of the Week: 3D Printed Store
This week’s selection is the enormous 3D printed store by London-based AI Build.
Design of the Week: Sculpture of Time
This week’s selection is the startling Sculpture of Time by Japanese artist Akinori Goto.
Zoetropes Get “4D” with the Incredible 3D Printed 4-Mation Platform
4-Mation Is A Series of 3D Modular Zoetropes With Swappable Animation.
Design of the Week: VW Caddy Front End Structure
This week’s selection is an interesting 3D printed front end structure for a Volkswagen classic car.
Design of the Week: Bathroom Phone Holder
This week’s selection is the eminently practical Bathroom Phone Holder by Thingiverse contributor hallonhatt.
Design of the Week: 3D Printed Models of London
This week’s selection is the highly detailed 3D Printed Models of London by Michal Konicek.
Design of the Week: Spool Tool Desk Organizer
This week’s selection is the unusual Spool Tool Desk Organizer by MatterHackers.
Design of the Week: Hovalin 3D Printed Violin
This week’s selection is the majestic 3D printed violin by Matt Hova of Hova Labs.
Design of the Week: Spool Holder
This week’s selection is the fabulously designed Spool Holder for Prusa i3 MK2 by Martin Majewski.
Design of the Week: The HIVE
This week’s selection is the very practical “The HIVE” Stackable Drawers by engineer Dan O’Connell of Philadelphia.
Design of the Week: Wearable 3D Printer
This week’s selection is the incredible Wearable 3D Printer by Naomi Wu.
Design of the Week: Benedict Cumberbatch Sculpture
This week’s selection is the well designed 3D sculpture of actor Benedict Cumberbatch by 3D Geppetto.
Noted 3D Designer Turns Paid Designs Into Free Downloads
Israeli 3D designer Asher Nahmias, aka Dizingof, has unexpectedly marked many incredible designs as free downloads.
Design of the Week: Aposema Mask
This week’s selection is the very strange Aposema mask by Adidas Meyer, Silvia Rueda and Sirou Peng.
Design of the Week: SimpSymm
This week’s selection is the complex 3D printed “SimpSymm” series by Christoph Bader and Dominik Kolb of Deskriptiv.
Design of the Week: Chromatic Vase
This week’s selection is the fascinating Chromatic Vase by designer Devin Montes.
How To Make A 3D Printed Roller Coaster
Matt Schmotzer, a graduate student at Purdue University for mechanical engineering, has always had an affinity towards both roller coasters and 3D printing.
Design of the Week: Flexible Paper Towel Roll Holder
This week’s selection is the eminently practical Flexible Paper Tool Roll Holder by Thingiverse contributor Eric Veber.
Design of the Week: DIY Furniture Joints
This week’s selection is the practical set of DIY furniture joints by Martina Caset.
Design of the Week: Plantygon
This week’s selection is the fun Plantygon by designer Samantha Welch.
Another Compliant Mechanism Project: FlexSys
Recently we posted as story about Disney producing compliant mechanisms; it turns out another company is already producing them.
Design of the Week: Spill Proof Oil Container
This week’s selection is the practical spill proof oil container by YouTuber Vice Chief.
Design of the Week: Solar Filter
This week’s selection is the soon to be very useful 3D printed Solar Filter by Walid Maalouli.
Design of the Week: Artichoke Lamp Shade
This week’s selection is the beautiful Artichoke Lamp Shade by gCreate.
Design of the Week: Golden Gate Bridge
This week’s selection is the massive Golden Gate Bridge model by Reddit contributor TheOrangeWolf.
Design of the Week: Cerco Espresso Cup
This week’s selection is the subtle Cerco Espresso Cup by Spanish artist Jordi López Aguiló of Kutarq Studio.
Design of the Week: Bubble Cake Mold
This week’s selection is the tasty Bubble Cake mold by Ukrainian food artist Dinara Kasko.
Design of the Week: Six Axis Robot Arm
This week’s selection is the complex six axis robot arm by Chris Annin.
Design of the Week: The Lugger
This week’s selection is the very useful “Lugger” by designer Tyler Panka, a.k.a. “Right2Make”.
Design of the Week: Mister Screamer
This week’s selection is the highly useful “Mister Screamer”, an 80 dBA Filament Alarm by 3D print operator and writer Donald Papp.
Another Way to 3D Print Bearings
Rotational bearings are something many folks attempt to 3D print, but end up disappointed.
Design of the Week: Face Mug
This week’s selection is the unusual 3D print Face Mug by CGtrader contributor Denis Kniaz.
Design of the Week: Air Raid Siren
This week’s selection is the rather loud Air Raid Siren design by Thingiverse contributor MLEPH.
Design of the Week: From the Earth to the Moon
This week’s selection is the fun “From Earth to the Moon” string-climbing rocket toy by Oklahoma-based Greg Zumwalt.
Design of the Week: Motorized Saber Toothed Tiger
This week’s selection is the fun Saber Tooth Tiger model by Greg Zumwalt.
Design of the Week: The Ultimate Bridge Test
This week’s selection is the amazing “Ultimate Bridge Test” by Gordon Laplante.
Design of the Week: Vacanti Man
This week’s selection is the horror-inducing Vacanti Man series by artist Rob Elford.
Design of the Week: Desktop Satellite Antenna
This week’s selection is the animated Desktop Satellite Antenna model by Hyperplane Interactive.
Design of the Week: 3D Printed Sundial
This week’s selection is the amazing 3D printed sundial by Mojotpix.
Design of the Week Star Wars Death Trooper
This week’s selection is the popular Star Wars Death Trooper by Sydney-based designer Paul Braddock.
Design of the Week: Guardian at the Gate
This week’s selection is the intricate “Guardian at the Gate” 3D printed doorbell cover.
Design of the Week: Marblevator Baby Steps Revisited
This week’s selection is the fun Marblevator Baby Steps Revisited by Oklahoma-based Greg Zumwalt.
Design of the Week: PiKon Telescope
This week’s selection is the ambitious PiKon 3D printed telescope.
Design of the Week: Splashlight
This week’s selection is the surprising Splashlight by Australia-based Avooq Creations.
Design of the Week: Customizable Temp Calibration Tower
This week’s selection is the highly useful Temperature Testing Column by Thingiverse contributor eibwen.
Design of the Week: Yet ANOTHER Machine Vise
This week’s selection is the 3D printable vise system by Pinshape contributor Christoph Laimer, a.k.a. “TheGoofy”.
Design of the Week: Kame House from Dragon Ball
This week’s selection is the popular Kame House by product designer Pepe Aliaga.
Design of the Week: OTF Comb
This week’s selection is the snappy OTF Comb by Thingiverse contributor Framingr.
Design of the Week: Fidget Star
This week’s selection is the wild Fidget Star by Brooklyn-based Laura Taalman.
Design of the Week: RYST
This week’s selection is the fascinating RYST wearable iPhone stand by designer Cal Craven.
Design of the Week: $30 3D Scanner
This week’s selection is the interesting #30 3D Scanner 3D model by UK-based designer Dave Clarke.
Design of the Week: Assembled Catapult
This week’s selection is the well-designed “Assembled printed catapult without support” by France-based Genapart.