3D Printing Blog


ALL STORIES

Resin 3D Printing Ventilation Is Still Easy To Get Wrong

Resin 3D Printing Ventilation Is Still Easy To Get Wrong

Resin 3D printers are easy to install. The ventilation for them isn't as simple.

String Cubed Proposes Using Wet Filament to Protect Heat-Sensitive Materials

GE Patent Uses Laser Flicker To Spot LPBF Defects

GE Patent Uses Laser Flicker To Spot LPBF Defects

In metal LBPF, a laser can look perfectly healthy while the powder beneath it is not.

Can 3D Printing Help Build the Global Building Boom?

Can 3D Printing Help Build the Global Building Boom?

Charles G. Goulding looks at how 3D printing could deliver faster, more material-efficient construction for everything from wind-turbine bases and water tanks to bridges, seawalls and postwar rebuilding.

Lattice Structures Show “Double Anisotropy”

Prusa Patent Shapes Nozzle Channels For Higher Flow

Prusa Patent Shapes Nozzle Channels For Higher Flow

Prusa has patented a very unusual and possibly quite powerful hot end design.

Thermal Resistance of 3D Printed Parts Goes Both Ways

Thermal Resistance of 3D Printed Parts Goes Both Ways

Thermal resistance is often spoken of for 3D print materials, but I ran into an unusual scenario involving temperature.

Helsing Moves to West Virginia With 3D Printing in Its Drone Manufacturing Strategy

Helsing Moves to West Virginia With 3D Printing in Its Drone Manufacturing Strategy

Charles Goulding and Ari Willick examine how Helsing’s expansion into West Virginia signals a broader shift toward mass production of drones powered by additive manufacturing.

Design of the Week: Dining Table

Design of the Week: Dining Table

This week’s selection is the astonishing Dining Table by maker Trey DeWolf.

Topology Optimization Needs To Know How Parts Will Print

Who’s The Biggest In 3D Printing, October 11, 2026

Who’s The Biggest In 3D Printing, October 11, 2026

Once again we take a look at the valuations of the major 3D printing companies over the past week.

Tens Across the Board: How the University of Tennessee and Other Organizations are Fixing the Manufacturing Workforce Gap

Tens Across the Board: How the University of Tennessee and Other Organizations are Fixing the Manufacturing Workforce Gap

Charles R. Goulding and Kate Esposito highlight the groundbreaking initiatives transforming manufacturing education and preparing the next generation of additive manufacturing professionals.

Is Bambu Lab Testing Multiple Retail Formats for Global Expansion?

Is Bambu Lab Testing Multiple Retail Formats for Global Expansion?

Bambu Lab is one of the biggest producers of desktop 3D printers on the planet, but did you know they have a number of retail locations?

How Many Washes Does a Resin 3D Print Really Need?

How Many Washes Does a Resin 3D Print Really Need?

I’m reading an interesting post about washing resin prints.

Could 3D Printing Change Habitat for Humanity’s Volunteer Model?

Could 3D Printing Change Habitat for Humanity’s Volunteer Model?

Habitat for Humanity is experimenting with 3D printed construction, but there’s an interesting question about where this might eventually lead.

How the Air Quality Crisis Is Accelerating the Next Generation of Filtration Technology

How the Air Quality Crisis Is Accelerating the Next Generation of Filtration Technology

Charles Goulding and Lia Palumbo explore how increasing wildfire smoke and air quality concerns are driving innovation in filtration technologies. As demand for high-performance filtration grows, companies are investing in advanced…

Copper Turns A Biodegradable 3D Printing Blend Antibacterial

Copper Turns A Biodegradable 3D Printing Blend Antibacterial

Researchers have found an interesting way to give a biodegradable 3D printing material a second job: fighting bacteria.

Study Finds Some 3D Printer Filaments Can Affect Skin Cells

Study Finds Some 3D Printer Filaments Can Affect Skin Cells

Are 3D printer filaments toxic? It turns out they might be.

Bambu Lab Wins Patent Review After Stratasys Jury Victory

Bambu Lab Wins Patent Review After Stratasys Jury Victory

There’s been another development in the ongoing patent dispute between Stratasys and Bambu Lab.

Growth 3D Printing Pulls Shapes From Reactive Resin

Growth 3D Printing Pulls Shapes From Reactive Resin

This process prints by pulling a reaction out of a vat.

Will The Real Superalloy Please Stand Up?

Will The Real Superalloy Please Stand Up?

Charles G. Goulding explores why the world's latest "miracle" superalloys rarely replace steel overnight and how additive manufacturing is reshaping the path from laboratory breakthrough to commercial success.

Z Hop Setting Seems to Control FFF Surface Finish

Z Hop Setting Seems to Control FFF Surface Finish

A tiny slicer setting may have a big large effect on FFF surface quality.

California Enacts 3D Printing Law With Standards Requirement

The California proposed law to control 3D printers is no longer proposed: it’s the law.

Stanford Patent Proposes 3D Printing Through a Keyhole

Stanford Patent Proposes 3D Printing Through a Keyhole

What if the printhead could snake its way into the build instead of hovering above it?

Align Patent Uses Temperature To Tune 3D Printed Resin

Align Patent Uses Temperature To Tune 3D Printed Resin

What if changing a resin’s temperature could change the properties of the finished print?

Soaring to New Heights: How a Strategic Partnership and Additive Manufacturing Will Revolutionize Aerospace Engineering

Soaring to New Heights: How a Strategic Partnership and Additive Manufacturing Will Revolutionize Aerospace Engineering

Charles R. Goulding and Kate Esposito reveal how a transatlantic aerospace collaboration is combining cutting-edge defense innovation with additive manufacturing to redefine the future of airpower.

AI Robot Learns Post-Print Handling Eight Moves At A Time

AI Robot Learns Post-Print Handling Eight Moves At A Time

A robot may eventually be able to handle routine 3D printing chores simply because you told it what to do.

Carbon Fiber Does Not Automatically Make FFF Parts Stronger

Carbon Fiber Does Not Automatically Make FFF Parts Stronger

Carbon fiber filled filament sounds like an easy upgrade, but the reality is considerably messier.

Lynxel Teases LMS, a New Full-Color Resin 3D Printing Process

Lynxel Teases LMS, a New Full-Color Resin 3D Printing Process

An entirely new full-color 3D printing process is about to launch.

Quadratic 3D Building A Volumetric Printing Platform

Xolo Patent Uses Messy Light Beams To Smooth Volumetric Prints

Xolo Patent Uses Messy Light Beams To Smooth Volumetric Prints

Volumetric 3D printing can be fast, but the light itself can leave fingerprints on the part.

If You Build it, They May Come: Lockheed’s Strategic Shift

If You Build it, They May Come: Lockheed’s Strategic Shift

Charles R. Goulding and Preeti Sulibhavi discuss how Lockheed Martin's bold production strategy could foreshadow the next era of defense manufacturing, where additive manufacturing plays an increasingly strategic role.

Uniformation to Launch for Fully Automated Resin Printer

Uniformation to Launch for Fully Automated Resin Printer

Now here’s a new take on resin 3D printing: full automation, on the desktop.

Padel’s, Ballers and 3D Printing Opportunities

Padel’s, Ballers and 3D Printing Opportunities

Charles R. Goulding and Aaron Rofe reveal how the same 3D printing breakthroughs reshaping pickleball and tennis are poised to revolutionize padel equipment as the sport rapidly expands across the U.S.

A PETG Strength Predictions Dataset

A PETG Strength Predictions Dataset

A new PETG dataset and codebase looks to make FFF strength prediction more accurate.

Design of the Week: Futuristic Czech Church

Design of the Week: Futuristic Czech Church

This week’s selection is the Holy Trinity Church and Cardinal Josef Beran Community Centre by architect Zdeněk Fránek.

Bambu Lab’s WO Patent Burst Maps The H2D

Bambu Lab’s WO Patent Burst Maps The H2D

A curious cluster of Bambu Lab patent applications has suddenly appeared.

Who’s The Biggest In 3D Printing, October 4, 2026

Who’s The Biggest In 3D Printing, October 4, 2026

Once again we take a look at the valuations of the major 3D printing companies over the past week.

From Part Shortages to Smart Manufacturing: The Abrams Tank Gets a Digital Upgrade

From Part Shortages to Smart Manufacturing: The Abrams Tank Gets a Digital Upgrade

Charles R. Goulding and Preeti Sulibhavi discuss how recent innovations from Honeywell, Pratt & Whitney, and the Army are creating new pathways to overcome legacy engine part shortages through advanced manufacturing.

OwlCAD Brings Built-In AI and MCP Connectivity to Cloud CAD

OwlCAD Brings Built-In AI and MCP Connectivity to Cloud CAD

A new CAD option has appeared, and it’s all focused around AI capabilities.

BMW’s Latest 3D Printing Expansion is Really a 35-Year Story

BMW’s Latest 3D Printing Expansion is Really a 35-Year Story

BMW is investing further in additive manufacturing, and that seems like a normal thing to do.

A Cooler Way To Make Volumetric 3D Prints

A Cooler Way To Make Volumetric 3D Prints

Volumetric 3D printing has a heat problem, and researchers may have found a way around it.

Stratasys Patent Doubles Color Printing Drops Per Travel

Stratasys Patent Doubles Color Printing Drops Per Travel

What if a color 3D printer could print two layers at once without doubling its number of printheads?

Additive Industries Patent Splits Powder Beds Into Independently Controlled Zones

Additive Industries Patent Splits Powder Beds Into Independently Controlled Zones

Additive Industries seems to want to make its LPBF print beds into a collection of smaller machines.

E3D Launches FlowCore Licensing Program

E3D Launches FlowCore Licensing Program

E3D announced a licensing program for their high-flow extrusion technology: FlowCore.

PrintHaus Turns Building Ideas Into 3D Printable Model Kits

PrintHaus Turns Building Ideas Into 3D Printable Model Kits

There’s a browser app that lets you design a building and then figures out how to 3D print it.

Interface Geometry Can Save Multimaterial PLA Prints

Interface Geometry Can Save Multimaterial PLA Prints

It turns out that FFF printed dovetail joints are not always the strongest way to join multi-material parts.

Optimizing Optics: How Additive Manufacturing is Revolutionizing the Contact Lens Industry

Optimizing Optics: How Additive Manufacturing is Revolutionizing the Contact Lens Industry

Charles R. Goulding and Kate Esposito examine how additive manufacturing is making custom hard contact lenses faster, more affordable, and accessible for millions of patients.

LLNL Patent Replaces LPBF Rastering With A Digital Light Mask

LLNL Patent Replaces LPBF Rastering With A Digital Light Mask

LLNL is making a metal powder bed fusion machine print like an MSLA resin system.

PrintYourVehicle Could Eventually Make Real Car Parts Printable

PrintYourVehicle Could Eventually Make Real Car Parts Printable

There’s now a free 3D model site intended for car parts: PrintYourVehicle.