3D Printing Blog

Yet another ingenious 3DCP application has emerged: swimming pools.

There are reports of malware being spread through online 3D model sites.

A new paper details a low-cost, body powered 3D printed finger prosthesis for trans-phalangeal amputees, signaling fresh momentum for practical, customizable partial-digit solutions.

Charles R. Goulding and Preeti Sulibhavi connect the hit TV drama’s emergency room realism to how Pittsburgh hospitals are already using 3D printing to plan surgeries and improve patient care.

A new paper outlines a unified, simulation-first pipeline that validates a lightweight, 3D printed 14 DOF humanoid before any plastic touches a heated bed.

Could this new device be the first desktop 5-axis 3D printer?

After thirty years, the Wohlers Report is going full digital.

Velo3D says it has become the first qualified metal additive manufacturing vendor for the US Army’s ground vehicle program, a sign the service wants faster pathways from “cool demo” to approved…

Charles R. Goulding and Aaron Rofe highlight practical, real-world strategies that help organizations strengthen profitability while staying fully compliant.

Titomic has signed a Space Act Agreement with NASA to test cold spray manufactured components, a move that could push solid-state additive manufacturing closer to flight-critical use.

So, MyMiniFactory bought Thingiverse. What work awaits them?

A Tsinghua University team claims sub second volumetric 3D printing with fine features, and the trick is moving the optics instead of the resin.

Some continue to criticize Prusa Research’s new Open Community License, but why?

This week’s selection is the Mini Retro Kodak Photo Kiosk by snapiness.

MIT researchers have built a tiny magnetic mixer that keeps cells evenly suspended during extrusion bioprinting, looking to make printed tissues far more repeatable.

Once again we take a look at the valuations of the major 3D printing companies over the past week.

Charles R. Goulding and Preeti Sulibhavi analyze how companies like Pulte, Lennar, D.R. Horton, and KB Home are integrating additive manufacturing to cut costs and boost energy efficiency.

No one seems to have noticed, but 9T Labs appears to be gone.

Can you run in 3D-printed shoes? Someone gave it a try, and there are implications.

COBOD and partners have developed a new application for 3DCP: caissons.

Hitem3D is focusing on 3D printing for its image-to-3D AI system.

A research team proposes spectral extrapolation to recover determine surface roughness metrics on laser powder bed fusion parts from limited measurements, promising faster quality assurance for AM shops.

Easily the biggest news of the day: MyMiniFactory has acquired Thingiverse!

Another US state has proposed laws governing the use of 3D printing.

Creality introduced an interesting new 3D scanner, the Sermoon P1.

Charles R. Goulding and Jacob Nolan examine how Duke University’s research strategy, shaped by federal funding uncertainty, healthcare innovation, and advanced manufacturing trends, is positioning 3D printing as a key driver…

Researchers at the University of Fribourg unveiled a hybrid process that merges polymer 3D printing with molten metal droplet deposition to fabricate truly three dimensional electronics.

Bambu Lab has retired the venerable P1P 3D printer.

A report opens up the possibility that 3D printer waste could be put to good use.

A puzzling story from Ontario describes how a prospective homeowner purchased a robotic arm to print their own house.

Charles R. Goulding and Jacob Nolan detail how Honda leverages 3D printing to accelerate prototyping, preserve legacy vehicles, and modernize global manufacturing operations.

Researchers mapped how material composition changes during switchovers in large format, pellet-fed 3D printing.

Bambu Lab just made an important rule change about AI use on Makerworld.

There’s a new slicer in town: preFlight.

Big changes are afoot at PrintedSolid.

Charles R. Goulding and Preeti Sulibhavi highlight how 3D printed construction in Texas and infrastructure innovation in Florida are helping to shape the next generation of U.S. economic hubs.

A new Taiwanese patent details a 3D printed concrete mix that substitutes reservoir silt to lower cement and aggregate demand.

3D-Fuel and Helio Additive have partnered to enable the use of PCTG with Helio.

I’m back with more 3D printed shoes to review.

I’m looking at a new AI tool for developing 3D models, Synera.

This week’s selection is the amazing Lord of the Rings Guitar by Olaf Deigel.

A new study investigates cyclic deformation in a 3D printed high entropy alloy, a step toward predictable fatigue life for metal AM.

Once again we take a look at the valuations of the major 3D printing companies over the past week.

Charles R. Goulding and Preeti Sulibhavi highlight how the University of Maryland’s extensive HVAC 3D printing program is moving additive manufacturing from experimental concepts to real-world energy infrastructure.

The 3D print industry may be missing out on a major distributed application: footwear.

3D model theft is rampant, and there’s not a lot that can be done.

Stratasys made an interesting move that should grow their industrial customer base.

A new CMU framework uses large language models to spot defects and change print parameters during print jobs.

A new research paper introduces a compact screw-based pellet extruder for high content feedstocks, and it could materially shift costs and throughput for polymer, metal and ceramic additive manufacturing.

Bambu Lab has launched a new program to protect creators’ content.