Once again we take a look at the valuations of the major 3D printing companies over the past week.
Results for "icon"
Who’s The Biggest In 3D Printing, April 17, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
New Investment Puts COBOD In A Good Position
COBOD received an investment from a partner that will certainly raise the stakes in the battle for construction 3D print supremacy.
Who’s The Biggest In 3D Printing, April 10, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Let’s Get Physical: A New Prosthetic Restores People’s Sense of Touch
A start-up company, Psyonic, recently released the Ability Hand, a 3D-printed limb with touch-sensing capabilities.
Who’s The Biggest In 3D Printing, April 3, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
HVAC Production, Repairs, and the Impact of 3D Printing
Charles R. Goulding and Randall Rothbort look at the use of 3D printing HVAC equipment manufacturers.
Who’s The Biggest In 3D Printing, March 27, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Who’s The Biggest In 3D Printing, March 20, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Is It Too Easy To Make A Construction 3D Printer?
I’m beginning to think it is too easy to start 3D printing in concrete.
Diamond Age Lands Huge US$50M Investment
Diamond Age announced a massive US$50M investment, which could have a huge effect on construction 3D printing.
Who’s The Biggest In 3D Printing, March 13, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Who’s The Biggest In 3D Printing, March 6, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Post-Pandemic CapEx and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at how capital expenditures will increase after the pandemic and how they could benefit 3D printing.
Who’s The Biggest In 3D Printing, February 27, 2022
Once again we take a look at the valuations of the major 3D printing companies over the past week.
Atomic Level 3D Printing Under Development
Funding has been provided to researchers working on an “atomic” 3D printer for producing solar cells.
LVMH and 3D Printing in the Luxury Industry
Charles R. Goulding & Andressa Bonafe look at the use of 3D printing technology in the high-end fashion industry.
Desktop Metal Rebrands EnvisionTEC to ETEC
Desktop Metal did a rebrand this week.
Advertise
Fabbaloo Media Kit and Advertising Options Associate your brand with Fabbaloo – a well-respected online publication on 3D Printing / Additive Manufacturing by making an investment with us to meet your business objectives. We pride ourselves in writing stories that are thought-provoking and provide an analysis of current events in the 3D print industry. We… Continue reading Advertise
3D Printed Concrete for Tornado Protection
Charles R. Goulding and Joseph Castine look at how construction 3D printing might avert future disasters.
Zeiss: Powder to Performance with 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at the 3D printing activities of Zeiss.
Are You Ready For E3D’s Revo?
E3D-Online’s new Revo product set should make life far easier for FFF 3D printer operators.
Nano Dimension Developing New Conductive 3D Print Material
Nano Dimension announced a partnership with XPTL to develop a new conductive ink for their systems that is based on nanoparticles.
Very Tiny 3D Printing With Exaddon
Exaddon produces a unique 3D printer that can produce micro-sized metal objects.
Unusual 3D Print Collaboration Between Manufacturer and Content Provider
I’ve learned of an unusual collaboration between a 3D printer manufacturer, Anycubic, and a 3D content provider, MyMiniFactory.
24 Resin 3D Printing Tips You Need To Know
Do you have a resin 3D printer? Here’s a whole bunch of tips for you.
New Advances Boost Resin 3D Printing Options
Materials companies have been hard at work developing improved resins for 3D printing, creating new opportunities across industries.
COBOD Announces Massive Construction 3D Printing Project
Denmark-based COBOD announced a deal to 3D print dozens of homes in Kenya.
Innovations in 3D Printed Buildings
Could 3D printing really be used to solve the global housing crisis? Recent breakthroughs in the technology show we might not be that far off.
Hands On With The Voxelab Aries 3D Printer, Part 1
Our test lab has been quite busy lately. This time we reviewed the Voxelab Aries desktop 3D printer.
Soap, Coronavirus and 3D Printing
Charles R. Goulding and Preeti Sulibhavi examine the notion of 3D printing soap.
Construction 3D Printing Taking Off?
For many years, construction 3D printing has been mostly experimental or demonstrative. Now, that may be changing.
One on One With Ian Howe of Additive Industries
I had the chance to speak with Additive Industries’ new CEO, Ian Howe.
More Details on Raise3D’s new E2CF and Pro3 Series 3D Printers
We had a chat with Raise3D representatives to find out more about their latest 3D printers.
Six Connecticut Manufacturers Receive Grants for 3D Printing Operations
Charles R. Goulding and Preeti Sulibhavi look at six companies receiving grants for their contribution to industry.
Autodesk Fusion 360 Now Includes Embedded Assistance
Autodesk announced a new feature to assist designers using the Fusion 360 CAD system.
Sindoh’s Line of 3D Printers is Now Quite Broad
One of the more interesting but less well-known 3D printer manufactures is Sindoh.
ARK Moves to St. Pete Innovation District and 3D Printing
Charles R. Goulding and Preeti Sulibhavi examine the implications of an investment firm’s unusual relocation.
Nanoscale Glass 3D Printing Method Developed
Researchers at Rice University have developed a unique approach for 3D printing extremely small and complex structures in glass.
The Lies About Construction 3D Printing Are Being Exposed
A new video attempts to expose the “lies” about construction 3D printing.
Allbirds’ IPO and 3D Printing: For the Birds?
Charles R. Goulding and Preeti Sulibhavi examine the value of 3D printing technology for Allbirds, a footwear manufacturer.
3D Printing: The Solution for Unfinished Goods
Charles R. Goulding and Preeti Sulibhavi look at the challenging state of affairs in large scale manufacturing.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 1
I had a chance to assemble and test Voxelab’s new Aquila X2 desktop 3D printer.
In Conversation with Benny Buller, Velo3D Founder and CEO
Engineering.com caught up with Velo3D founder and CEO, Benny Buller, as the metal 3D printing company went public.
Taiwan Tensions and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at how 3D printing may be affected by the current Taiwan situation.
Creality’s Latest Resin 3D Printer: The HALOT-LITE
Creality announced a new desktop resin 3D printer, the HALOT-LITE.
3D Printing and Infrastructure Investments in Developing Countries
Andressa Bonafe and Charles Goulding investigate the possibilities for using 3D printing in infrastructure in developing countries.
Inversiones en infraestructura y la impresión 3D en países en desarrollo
Andressa Bonafe y Charles Goulding investigan las posibilidades de utilizar la impresión 3D en la infraestructura de los países en desarrollo, en español.
Mayku’s New Multipler: A Must-Have 3D Print Accessory?
Mayku today announced a new device, the Multiplier.
AON3D’s New Investment Could Take Them To The Moon
AON3D announced a major new investment and a partnership on a lunar project.
What Is The Largest 3D Printed Structure In North America?
How large is the biggest 3D printed structure in North America?
CarbonTech and Carbon Capture may be the Future of Carbon Reduction
CarbonTech is a wide variety of products that can be made from CO and CO2 emissions captured from power plants, biomass or direct air capture.
Essentium to Announce First Fully Independent Extrusion 3D Printer
Essentium is set to reveal a milestone device at the upcoming Rapid+TCT exhibition.
Diamond Age’s Advanced Construction 3D Printing Concept
A California company seems to have figured out how to take construction 3D printing to the next level.
Construction 3D Printing To Become Mainstream?
I was surprised to find a story about 3D printed housing in The Economist.
Could Additive Manufacturing Use “Green” Steel?
There’s been an explosion in the popularity of metal additive manufacturing, and that means more use of steel.
ioTech Introduces Continuous Laser Assisted Deposition 3D Printing Technology
The multi-material CLAD process is designed especially for electronics applications.
Would You Live in a 3D Printed Martian Home for a Year?
NASA is looking for volunteers to inhabit a 3D printed Martian home.
Design of the Week: Switchplate Identifiers
This week’s selection is the Switchplate Identifiers by Ryan Tanguay.
Automania, MoMA and 3D Printing
Charles R. Goulding and Preeti Sulibhavi examine how art is influenced by 3D printing through an automotive art show.
Digital Manufacturing Centre Launches In The UK
The UK’s Digital Manufacturing Centre has officially opened.
SIKA And The Concrete 3D Printing Revolution
Charles R. Goulding and Joseph Castine build on foundations of advanced concrete 3D printing with a look at SIKA’s involvement.
The Boeing-Airbus Truce And 3D Printing
Charles R. Goulding considers potential 3D printing-related implications of a major aerospace competitive truce.
Lithoz Expands
Lithoz announced an expansion, but what does this really mean?
CollPlant Biotechnologies And The Expansion Of Bioprinting
Charles R. Goulding and Arianna Coger examine R&D at CollPlant as bioprinting interest picks up.
3D Printing Tactile UNESCO World Heritage Sites
Researchers have developed a process for 3D printing tactile replicas of UNESCO World Heritage Sites and associated objects.
How Does Sakuú’s Unusual 3D Printing Process Work?
I spoke with Sakuú’s VP of Marketing and Business development, David Pederson, to find out more about this mysterious 3D print startup.
Xerox Enters 3D Printing With Powerful Technology
Charles R. Goulding and Preeti Sulibhavi consider implications of Xerox’s move into the 3D printing world.
Design of the Week: Mechanical Wall Clock
This week’s selection is the Mechanical Wall Clock by designer Harald Andersson.
3D Printing: Helping Just-In-Time Be On Time
Charles R. Goulding and Preeti Sulibhavi consider how 3D printing can contribute to the evolution of just-in-time inventory strategies.
Multi-Material Body Implant 3D Printing Technique Developed
Researchers at the University of Nottingham have made a breakthrough in healthcare 3D printing.
E-Waste And Duke University’s Impact On Recyclable Electronics Via 3D Printing
Charles R. Goulding and Joseph Castine consider research into 3D printing to impact e-waste.
Parametric Slit Injection 3D Printing
Researchers have developed a method for 3D printing flower jellies.
How Do Companies Find 3D Printers?
It all started with a random call.
Indian Industrial Titans Clash and 3D Printing
Charles R. Goulding and Preeti Sulibhavi look at troubles at an Indian tech giants might affect use of 3D printing technology.
3D Printers
Home News Sections 3d Printing Categories Manufacturing News Metal Additive Manufacturing News Recent 3d Printer Research Opinions & Ideas 3D Printed Designs Latest AM Corporate News 3D Print Services News 3D Printing Events Corporate Announcements & Analysis COMPANY CATEGORIES NETFABB NEWS PRUSA NEWS STRATASYS NEWS 3D SYSTEMS NEWS DESKTOP METAL NEWS CARBON NEWS GE ADDITIVE… Continue reading 3D Printers
2021 Global Reputation Leaders And 3D Printing
Charles R. Goulding and Preeti Sulibhavi consider ten leading companies’ activities in 3D printing.
THEFUTUREOFJEWELRY: Hands-On With Custom Jewelry
I recently customized a signet ring brought to life via web app and 3D printing.
Authentise x Hexagon: End-To-End Software Solutions For Additive Manufacturing
A new partnership is bringing shop floor data together with data intelligence for consistency in additive manufacturing.
Essentium Announces IDEX Industrial 3D Printer
Essentium today announced a new and rather interesting 3D printer, the HSE 280i HT.
Hands On With The Creality LD-006, Part Two: Setup And Operation
I had a chance to try out the Creality LD-006 desktop 3D printer. In this post we look at setting up and operating the machine.
3D Printing And NFTs: Part 1, The Problem
Could NFTs — Non Fungible Tokens — resolve key issues in 3D printing? What problems would they solve?
The Most Elastic Filament Ever?
Recreus announced a new filament that might be the most elastic flexible material on the market.
Students 3D Print Prototype “Lunar PAD”
A prototype lunar landing pad has been designed by students and 3D printed by ICON.
Growing Brains With 3D Printed Bioreactors
A 3D printed solution could allow breakthroughs in brain research.
Dual Trends Support Construction And Farm Equipment, And 3D Printing
Charles Goulding, Jr. considers how dual trends position equipment makers like John Deere and Caterpillar for upcoming success.
Official: VELO3D To Go Public
VELO3D officially announced they are going public.
Affordable Housing And 3D Printing
Charles Goulding Jr. considers the potential for 3D printing construction to aid in the affordable housing crisis.
Dissecting The Renishaw Sales Process
Charles R. Goulding considers the business side of Renishaw’s search for a buyer.
Formlabs Shows Everyone How To Do It
Formlabs announced a new scan-to-print feature that demonstrates how 3D printing should really be approached.
Understanding The Metal 3D Print Condensate Problem
Sintavia published an excellent document describing the condensate problem at many metal 3D print operations.
Welcome to the Neighborhood: A 3D Printed Housing Development Prepares for Habitation
Charles Goulding Jr. takes a look at the latest habitable construction project made using 3D printing technologies.
Structur3d Innovation Brings the Factory to Your Desktop
3D printing company introduces the Inj3ctor to allow everyone access to injection molding of rubber parts.
The Texan Freeze And 3D Printing Plastics Supply Disruption
Among the many enduring repercussions of last month’s disastrous winter storm in Texas is a plastics supply chain shortage that could impact filament raw suppliers.
Xometry’s New Fusion 360 Connection
Xometry has provided a plug-in for direct integration with Autodesk Fusion 360.