A new 3D print recycling service has emerged in Germany: RecyclingFabrik.
petg
Some Updates from Polymaker on the 3D Print Materials Scene
I had a chat with Luke Taylor of Polymaker about the latest developments from the company.
New AM Materials Round Up, May 17, 2022
Several new AM materials were announced in the past week.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 2
Our hands on review of the Anycubic Kobra desktop 3D printer continues with a look at operations, print results and conclusions.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 1
Our busy lab managed to give the Anycubic Kobra desktop 3D printer a thorough workout.
New AM Materials Round Up, March 25, 2022
Several new AM materials were announced in the past week.
New AM Materials Round Up
Several new AM materials were announced in the past week.
Hands On With The Anycubic Vyper 3D Printer, Part 3
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: print results.
Hands On With The Anycubic Vyper 3D Printer, Part 2
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: setup and printing.
Hands On With The Anycubic Vyper 3D Printer, Part 1
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: features and unpacking.
A Reminder For 3D Printer Operators During Heat Waves
It’s summer in the northern hemisphere, and that means one thing: Heat, and lots of it.
Let’s Recycle Your 3D Prints Into Jet Fuel
There may be a path to solving the dilemma of unwanted 3D prints.
Ultimaker Adds Industrial PETG Material
Ultimaker announced a new but familiar material for their industrial 3D printing platform: PETG.
It May Be Time To Abandon PLA For 3D Printing
I’m now considering whether PLA should be the default 3D printing material for desktop equipment.
The Twist Of Twist 3D Printing: $29 Black PETG Parts
Sometimes the twist of an idea is that it’s straightforward. Such is the case for Slant 3D’s new service, Twist 3D Printing, which is offering flat rate prototyping.
Thoughts On Using The Prusa MINI In 3D Printer Farms
After working with the Prusa MINI 3D printer, I have some thoughts on the use of this device in a potential 3D printer farm setup.
Hands On With Two More Fiberlogy Filaments
We examine two more filament materials from Fiberlogy, another PLA and a PET-G, and made some surprising discoveries.
Polymaker’s New 3D Printing Materials
Polymaker announced a series of new materials, and offered some dramatic demonstrations of their capabilities.
3D Platform’s Huge WorkCenter 500 Large Format 3D Printer
3D Platform has produced a rather large 3D printer, the WorkCenter 500, and we had a close look at it.
Not Your Average MakerBot
We had a long chat with MakerBot CEO Nadav Goshen about the current state of the company and its products.
Anisoprint Expands Continuous Fiber 3D Printing Capabilities
Anisoprint announced an arrangement that should make their continuous carbon fiber 3D printer even better.
Hands On With The Kodak Portrait 3D Printer: Final Thoughts
This is part 4 of a 4 part series reviewing the Kodak Portrait 3D printer.
Hands On With The Kodak Portrait 3D Printer: Advanced Operations
This is part 3 of a 4 part series reviewing the Kodak Portrait 3D printer.
Hands On With The Kodak Portrait 3D Printer: Basic Operations
This is part 2 of a 4 part series reviewing the Kodak Portrait 3D printer.
Hands On With The Kodak Portrait 3D Printer: Unboxing And Setup
This is part 1 of a 4 part series reviewing the Kodak Portrait 3D printer.