Formlabs announced a major new 3D printer, the Fuse X1.
large
TOP.E To Launch Large, Enclosed 5-Axis FFF 3D Printer
A new five-axis FFF 3D printer is set to appear on Kickstarter soon.
Bambu Lab Unveils A2L Large-Format Desktop 3D Printer
Bambu Lab announced a new and larger desktop FFF 3D printer, the A2L.
Tvasta Differentiates Cedar 3D Printer With AI-Based Concrete Mix Optimization
I ran across yet another new concrete 3D printer manufacturer, this time in India. What’s going on here?
Peopoly Launches GIGA 800 FGF 3D Printer With Large-Format Pellet Printing Capability
Peopoly announced the GIGA 800 FGF 3D printer.
The Modix MAMA-1000 Combines Pellet and Filament Printing in Compact Large-Format System
Modix announced a new, large-format 3D printer, the MAMA-1000.
The EP-M3050 has a Massive Build Volume and up to 256 Lasers
I’m looking at a very unusual new metal 3D printer, the EP-M3050 from Eplus3D. Eplus3D specializes in manufacturing rather large-format metal 3D printers, as they have multiple devices of this type currently in their product catalog. This type of machine is quite difficult to produce. There aren’t a lot of large-scale metal 3D printers using… Continue reading The EP-M3050 has a Massive Build Volume and up to 256 Lasers
Researchers Automate Calibration For 3D Printer Swarms
A new research paper describes an automatic calibration method that lets multiple robotic 3D printers work together on the same build with less setup and better alignment.
3D Systems Launches SLA 825 Dual With Dual-Laser Technology
3D Systems just introduced a very interesting resin 3D printer, the SLA 825 Dual.
Photocentric Expands Jeni System to Enable High-Volume Resin 3D Printing at Industrial Scale
If there ever was evidence that 3D print technology is ready for mass manufacturing, Photocentric just presented it.
Elegoo Announces Jupiter 2 Featuring Massive Build Size
Elegoo announced the massive Jupiter 2 resin 3D printer.
Design of the Week: X Bench
This week’s selection is the X Bench by The New Raw.
Southeastern Researchers Demo Support-Free Five-Axis Robotic FFF
Researchers at Southeastern Louisiana University demonstrated a six axis robotic FFF approach that uses non planar slicing and five axis paths to print support free parts.
Sovol 3D Printer Teaser Suggests Large-Format Multi-Color Printing System
Sovol could be the next company to release a multimaterial desktop 3D printer.
Artec 3D Launches Artec Jet Scanner for Large-Scale Outdoor 3D Mapping
Artec 3D released a pretty unusual 3D scanner, the Artec Jet.
MOVA Launches AtomForm Palette 300 with 12-Nozzle Multicolor 3D Printing System
Today MOVA officially launched a new, 12-color desktop 3D printer, the AtomForm Palette 300.
Farsoon Annouces 16-Laser Metal 3D Printer with Large Build Volume
Farsoon made a series of announcements, including a sixteen-laser metal 3D printer.
Thermwood Gear Pump Patent Optimizes Large Format Extrusions
A patent proposal by Thermwood could solve one of large area extrusion’s oldest challenges: keeping bead size consistent when a pellet fed printhead speeds up, slows down, and corners.
Noyron Computational Engineering Produces Record-Scale 3D Printed Rocket Engine
LEAP71 continues to break records, this time with the world’s largest 3D-printed aerospike rocket engine.
Huistone Patent Targets Large Area Resin Printing Economics
A new Chinese patent application describes a way to make large format resin systems much cheaper.
ICON Launches Titan 3D Concrete Printer Designed for Two-Storey Building Construction
ICON announced today the commercial availability of Titan, their latest and greatest 3DCP system.
Design of the Week: Styxosaurus
This week’s selection is the Styxosaurus project by the Canadian Fossil Discovery Centre.
ORNL Develops Multiplexed Extrusion System to Increase Large-Format 3D Printing Speeds
Researchers at the Oak Ridge National Laboratory have developed a unique multiplexing extrusion system.
Enormous 3D Print Farm in China Demonstrates Ultra High-Volume Additive Manufacturing
A hint of what’s to come was shown in a Chinese news piece about a rather large 3D print farm.
Is the TOP.E R1 the First Desktop 5-Axis 3D Printer?
Could this new device be the first desktop 5-axis 3D printer?
Prusa Cuts Prusa XL Price as Multicolor 3D Printing Competition Intensifies
Prusa Research has lowered their price for the tool-changing Prusa XL 3D printer.
Patent: Cooling Unlocks Large-Volume Volumetric AM
A new patent outlines a cooled volumetric 3D printing architecture that promises bigger parts and faster builds.
PollyPolymer Emerges as New Chinese Competitor in Industrial Resin 3D Printing
The West may face a new competitor in 3D printing, PollyPolymer.
Slant 3D Forecasts Deployment of 1.5 Million 3D Printers Over the Next Decade
Slant 3D expects to operate 1.5 million 3D printers in the next ten years.
Design of the Week: Huge 3DCP print
This week’s selection is a gigantic 3DCP print by Urbacon Trading & Contracting.
Free 3D Splitter Tool Simplifies Breaking Large Models Into Printable Segments
There’s a new tool for printing very large objects: 3D Splitter.
Design of the Week: Horus
This week’s selection is the massive Horus Lupercal by Reddit contributor HammerDoris40k.
Farsoon Expands Polymer Lineup With Lower Cost HT601P-2
Farsoon introduced a new polymer 3D printer that fills a gap in their lineup.
University of Windsor 3D Printing Multi-Story Student Residence
3D printed multi-story, net-zero housing complex to be a first for Canada.
PostProcess Launches DEMI X 5000, a Large-Format Dual-Agitation Resin Cleaning System
PostProcess announced a rather interesting new resin cleaning system, the DEMI X 5000.
EOS, Farsoon, and Colibrium Additive Unveil New High-Power Metal 3D Printers With Major Productivity Gains
Last week seemed to be the moment for metal 3D printers, as several companies announced new models.
QIDI Max4 Redefines Affordable Professional 3D Printing with High-Performance Design
QIDI’s new Max4 is quite a powerful desktop 3D printer.
Valcun’s REMUS Enables Large-Scale Aluminum 3D Printing
Valcun took an interesting step into a new market with their new REMUS toolhead.
Caracol AM Unveils THE CAB, a 3D Printed RV Made From Recycled Polymer
On display at Formnext, the latest project demonstrates faster production, reduced waste, and modular design for sustainable mobile living.
Anycubic Launches Kobra S1 Max Combo with Larger Build Volume and Enhanced Material Capabilities
Anycubic revealed their latest desktop 3D printer: the Kobra S1 Max Combo.
LEAP 71 and Nikon SLM 3D Print Giant Rocket Injector
LEAP 71 and Nikon SLM Solutions have 3D printed a huge and complex rocket engine component.
Prusa Launches Larger CORE One L 3D Printer
Prusa Research suddenly announced the CORE One L 3D printer.
Modix Expands Into FGF With Launch of MAMA-1700 and Plans for Larger Systems Ahead
News this week from Modix: they’re now shipping their massive MAMA-1700 3D printer.
Split3r Launches as Low-Cost Alternative to Luban for Large-Scale 3D Printing
There’s a new software option to enable 3D printing of very large objects.
Hands On With The Bambu Lab H2S 3D Printer, Part 4
Our look at the new Bambu Lab H2S desktop 3D printer concludes with final thoughts.
Hands On With The Bambu Lab H2S 3D Printer, Part 3
Our look at the new Bambu Lab H2S desktop 3D printer continues with operations.
Hands On With The Bambu Lab H2S 3D Printer, Part 2
Our look at the new BamOur look at the new Bambu Lab H2S desktop 3D printer continues with unboxing, assembly and calibration.
Hands On With The Bambu Lab H2S 3D Printer, Part 1
We’ve been secretly testing the new Bambu Lab H2S desktop 3D printer for a while, and here are our findings.
Bambu Lab Introduces Single-Nozzle H2S Combo with Large Build Volume and Advanced Features
It’s here: Bambu Lab announced the new H2S 3D printer today.
Design of the Week: Life Sized Hulk
This week’s selection is the life-size Hulk 3D print by Reddit contributor seagullsattack.
New Yumi C Series 3D Printers Offer Low-Cost Multicolor Printing with Reduced Waste
A new 3D printer has appeared on Kickstarter: the Yumi C series.
LulzBot Launches MegaSpool for Reliable High-Volume Filament Feeding on Any FFF 3D Printer
LulzBot has released their “MegaSpool” spooling solution, and it should work for every FFF 3D printer. Most filament spools available on the market today are designed to hold either 1kg of material or 750 g. Because of this, most desktop FFF systems are designed to accommodate that size of spool. While some 3D printers, like… Continue reading LulzBot Launches MegaSpool for Reliable High-Volume Filament Feeding on Any FFF 3D Printer
Nikon SLM Solutions Hints at Massive New Metal 3D Printer in Rocket Lab Deal
Nikon SLM Solutions announced a rather prominent new customer: Rocket Lab.
Progress Group Introduces Selective Paste Intrusion for High-Resolution Concrete 3D Printing
Progress Group has developed a new form of concrete 3D printing.
The Big Kube Does Indeed Exist
The Big Kube does exist, and it’s at InkBit headquarters. What’s this all about? The “cube” in question is pictured at the top. It’s a variation of a popular 3D model that is articulated and can be folded over and over. These 3D models are printed in one piece and use joints in two directions… Continue reading The Big Kube Does Indeed Exist
World’s Largest 3D Printer? COBOD’s BODXL Redefines Construction Scale
It seems that there is now a new champion for the title of “world’s largest 3D printer”.
Flashforge To Expand Professional 3D Printer Line With Actively Heated Guider 4 Pro
Flashforge continues to refine its 3D printer product line with the upcoming Guider 4 series.
Design of the Week: Infill Heritage
This week’s selection is “Infill Heritage” by BBA Studio and partners.
Newcomer Aura3D’s F9 3D Printer for Large-Scale Printing
We had a look at a new large-format FFF 3D printer, the F9 from Aura3D.
Elegoo Previews Jupiter 2: High-Resolution Resin 3D Printer with Innovative Features
We had a peek at a new 3D printer from Elegoo, the Jupiter 2.
Neo 800+ Debuts as Stratasys’ High-Speed Upgrade to Flagship SLA 3D Printer
Stratasys announced a new industrial 3D printer, the Neo 800+.
ERYONE Enters Print Farm Market with Durable, High-Volume Thinker X400 3D Printer
There’s a new 3D printer on Kickstarter, the ERYONE Thinker X400.
Farsoon FS1521M-U Pushes the Limits of Metal 3D Printing with 32 Lasers
Farsoon announced a metal 3D printer with a record 32 lasers.
Bambu Lab H2D: What We Know About the Upcoming High-Performance 3D Printer
We’re finally seeing some details about the upcoming Bambu Lab 3D printer. What do we know so far?
LOOP 3D Unveils LOOP PRO X+ Turbo: A High-Performance Professional 3D Printer
LOOP 3D announced a new and powerful professional 3D printer, the LOOP PRO X+ Turbo 3D printer.
Compound Dynamics’ RM40: A Massive Enclosed Large-Format 3D Printer
Compound Dynamics introduced a new large-format polymer 3D printer, the RM40.
LuBan Expands 3D Printing Tools: More Ways to Customize and Print Large Models
It’s time to give an update on LuBan, one of the most interesting 3D print utilities.
How to Use OpenSCAD to Generate Dovetail Joints for 3D Printing
Building snap-fit 3D models is fun, but how, exactly, do you design them?
Hands On With The Anycubic Photon Mono M7 Max 3D Printer, Part 3
We conclude our test of the Anycubic Photon Mono M7 Max resin 3D printer with a look at software, print results and final thoughts.
Hands On With The Anycubic Photon Mono M7 Max 3D Printer, Part 2
Our look at the Anycubic Photon Mono M7 Max resin 3D printer continues with setup, calibration, and operations.
Hands On With The Anycubic Photon Mono M7 Max 3D Printer, Part 1
We had the opportunity to test the brand new Anycubic Photon Mono M7 Max resin 3D printer.
Hands On With The Formlabs Resin Pump, Part 2
Our look at the resin pump system for the new Form 4L 3D printer concludes.
Hands On With The Formlabs Resin Pump, Part 1
We were provided with a resin pump for our new Form 4L 3D printer, and gave it a good test.
Tumaker’s Modular 3D Printers: FFF and FGF Flexibility in One Platform
Today we’re looking at a Spanish 3D printer manufacturer, Tumaker.
Rosotics Shifts Focus to Space Construction with HALO 3D Printing Technology
Rosotics is undertaking a major shift in strategy, and this could affect not only 3D printing, but our future in outer space.
MX3D Doubles Revenue as Demand for Large-Scale WAAM Systems Grows
MX3D is gaining momentum in the marketplace.
Eplus3D’s Growth in Metal 3D Printing: 100 Super-Meter PBF Units Delivered
Interesting news from Eplus3D: they’ve sold over 100 metal 3D printers.
Bambu Lab Leak Suggests New H2D 3D Printer with Dual Extrusion and Larger Build Volume
In a possible major leak, a document that might depict an unannounced Bambu Lab 3D printer has appeared.
GarageBot3D: Profabb’s Foldable 3D Printer Redefines Large-Scale Printing
I saw the most unusual 3D printer at Formnext, the GarageBot3D.
The UP400 Pro: Tiertime’s Latest High-Speed, High-Temperature 3D Printing Powerhouse
Tiertime is set to release a larger, high-speed 3D printer, the UP400 Pro.
3D Printing an Entire Garage Facade: Sensible or Not?
Someone has 3D printed the front facade for their garage — but is this a good idea?
How D3-AM’s Binder-Free MPJ Process Simplifies Ceramic 3D Printing
We had a look at D3 Additive Manufacturing’s latest ceramic 3D printer.
FLSUN Black Friday Sale: The Fastest Desktop 3D Printers at Incredible Prices
There are many Black Friday deals on this week, but those from FLSUN are of particular interest.
How Lincoln Electric’s Additive Manufacturing Advances Offshore Wind Technology
I had a chat with Lincoln Electric at Formnext and learned about an entirely new class of 3D print application.
Hands On With The Formlabs Form 4L, Part 3
Our review of the Formlabs Form 4L concludes with software, print results, and final thoughts.
Hands On With The Formlabs Form 4L, Part 2
Our look at the Formlabs 4L 3D printer continues with Operations.
Hands On With The Formlabs Form 4L, Part 1
We’ve been testing the brand-new Formlabs 4L 3D printer in the past few weeks, and we’d like to tell you about it.
Creality Launches K2 Plus Combo: High-Speed, Servo-Driven 3D Printing for Professionals
Today is the day Creality launches their long-anticipated K2 Plus Combo in their online store.
COBOD Unveils BOD3: Next-Gen 3D Construction Printer with Infinite Build Length
COBOD launched their latest construction 3D printer, the BOD3.
MASSIF: AddUp’s Ambitious Plan for Eco-Friendly, Large-Format Metal 3D Printers
AddUp announced a major new project to develop a powerful metal 3D printing system: MASSIF.
Formlabs Launches Form 4L: A High-Speed, Large-Format 3D Printer for Production Use
Formlabs announced two new 3D printers, the Form 4L and Form 4BL. The company had previously announced the Form 4, a major change from their prior flagship machine, the Form 3. The new Form 4L incorporates many of the new features introduced with the Form 4, but in a much larger package. Formlabs has done… Continue reading Formlabs Launches Form 4L: A High-Speed, Large-Format 3D Printer for Production Use
Bambu Lab Postpones Launch of New Larger Format 3D Printer Until 2025
There’s been a significant update from Bambu Lab regarding their rumored upcoming large-format 3D printer.
Hands On With The FLSUN S1 3D Printer, Part 3
Our review of the world’s fastest desktop 3D printer, the FLSUN S1, concludes with software, print results and final thoughts.
Hands On With The FLSUN S1 3D Printer, Part 2
Our look at the world’s fastest desktop 3D printer, the FLSUN S1, continues with setup, calibration, and operations.
Hands On With The FLSUN S1 3D Printer, Part 1
We were fortunate to test the world’s fastest desktop 3D printer, the FLSUN S1.