You searched for makerbot « Page 10 of 11

We found 1002 results for your search.

Hot Pop Factory

Two Toronto architects have used 3D printing technology to start a new business in their own home: designing and manufacturing jewelry. Matthew Compeau and Biying Miao have launched Hot Pop Factory, producer of striking 3D printed jewelry designs. Hot Pop Factory offers inexpensive necklace, earrings and rings based on a consistent design theme. But… Continue reading Hot Pop Factory

Saving The Past With The Future

Peter at RepRap Central tells a story some of us have lived through, although not nearly as dramatic. The story involves Malcolm Messiter, whose decades-old Robert Goble Harpsichord required some maintenance. Specifically, the string-plucking jacks, made of Delrin, were cracking and needed to be replaced. Worse, there were some 183 such jacks in the harpsichord. … Continue reading Saving The Past With The Future

Bre Speaks!

We recently contacted MakerBot chief Bre Pettis and asked him a few questions for this exclusive interview below. We have suspicions he and his crew at MakerBot are working on something really interesting, but as you’ll see he’s not telling. But he is excited. Fabbaloo: MakerBot has been expanding very rapidly over the past year. What’s… Continue reading Bre Speaks!

An Interview With The DreamVendor

Actually we’re not interviewing the DreamVendor itself; instead we’re interviewing Dr. Chris Williams, the Director of the DREAMS Lab at the Virginia Polytechnic Institute & State University, the organization that produced the DreamVendor. (Wait, what’s a “DreamVendor”??? Read on and you’ll find out.) Fabbaloo: We’re wondering what the DREAMS lab is all about? Can… Continue reading An Interview With The DreamVendor

Further Evidence of 3D Print Mainstreaming

As 3D printing gains popularity it was inevitable. 3D printing has made it into the famous Cheezburger network. We noticed an animated GIF of a Yoda coming off of a MakerBot 3D printer on Cheezburger’s Señor Gif site. Via SenorGif

The 3DPrintShow In London

In London this October is the 3DPrintShow, three days of exhibitions and shows all about 3D printing. Taking place from October 19th through the 21st, this event includes exhibits from all the major 3D print vendors and services, including MakerBot, 3D Systems, EOS, Objet, Shapeways, i.Materialise, Tinkercad, Anarkik3D, Uformia and many others. They’ll be… Continue reading The 3DPrintShow In London

3D Printing 2012 – Top Prints So Far

Editor’s note: This guest post comes from 3D printing aficionado Chris Waldo, who’s anxious to tell us his thoughts on some very cool 3D prints in 2012. Since the late 1970’s, 3D printing has come a long way. Build sizes, detail levels, material science, and speed have all improved significantly in comparison to the… Continue reading 3D Printing 2012 – Top Prints So Far

The Met’s 3-D Scanning and Printing Hackathon

An interesting experiment took place at New York City’s Metropolitan Museum of Art recently, in which the Met tag-teamed with MakerBot to produce 3D art models. A team of folks from MakerBot were invited by the Met to journey through several collections to perform 3D scans of famous artwork. The scans were then converted… Continue reading The Met’s 3-D Scanning and Printing Hackathon

A Real Robot 3D Printer

The folks at Hackaday found a 190 pound experimental 3D printer made from a scrap industrial robot arm – and it actually works. Made by Rensselaer Polytechnic Institute undergrad and maker extraordinary Dane Kouttron, this project required an enormous amount of effort to convert the surplus robot arm into a working 3D printer. The… Continue reading A Real Robot 3D Printer

The BurritoB0t

This is a real 3D printer specifically designed to print delicious burritos – we’re not kidding! The BurritoB0t, a thesis project by maker Marko Manriquez, extrudes combinations of burrito components to dynamically construct, well, a custom-designed burrito. Technically, the BurritoB0t is a straightforward modification and combination of RepRap-derived technologies. It’s based on the Hadron Bot, which… Continue reading The BurritoB0t

A $34 Extruder?

Remember buying third-party parts for your car? They might have been less expensive, or better in some way and were fun to install and brag about. Now you can do the same on your 3D printer with QU-BD, who are launching a fundraising campaign for their new product: a replacement extruder that costs only USD$34. … Continue reading A $34 Extruder?

3D Printed Fish Breeding Gear

We’ve seen many applications of 3D printing to a wide variety of situations, but this one is pretty interesting: Indiana-based research scientist Shane Graber has been using his MakerBot to produce a variety of specialized items for his salt-water fish breeding experiments. He’s designed an incredibly simple brine hatchery composed of a base that’s… Continue reading 3D Printed Fish Breeding Gear

3D Printing Community Survey Results

Some time ago we directed Fabbaloo readers to an academic survey of the 3D printing community sponsored by the P2P Foundation. Now, the results are available, giving us a first real peek into the world of 3D printing. What were the results? There were many results, but here’s the interesting findings, as we… Continue reading 3D Printing Community Survey Results

Invent a Filament Maker, Win $40K!

You’ve got a personal filament-based 3D printer, like a MakerBot, BFB or BotMill. You need filament to print with. What do you do? You shop online and find the best color and price and have it shipped to you. The price of filament varies considerably depending on where you’re buying, but generally the price has… Continue reading Invent a Filament Maker, Win $40K!

Around the Show Floor at Rapid 2012

While we’re intending on writing up several posts on our observations at Rapid 2012, we thought we’d start with a very cool selection of awesome stuff found on the show floor. Literally laying on the floor of the gigantic 3D Systems booth, this 3D printed guitar actually plays. Also in the 3D Systems… Continue reading Around the Show Floor at Rapid 2012

The B9Creator 3D Printer

It seems that KickStarter is chock full of 3D printers kits these days and every week there is a new startup company with an improvement to the latest designs. This week we’re looking at the B9Creator 3D Printer. Michael Joyce’s B9Creator is a resin-based 3D printer, unlike most other inexpensive 3D printers that are… Continue reading The B9Creator 3D Printer

Human vs 3D Printer: The Sequel

It was only a few days ago that UK designer Dominic Wilcox challenged a 3D printer to a mano-a-mano duel to produce a model of a cathedral. In round one, Wilcox was able to defeat a MakerBot Replicator with his own two hands and a lump of clay. Now there’s been another event, this… Continue reading Human vs 3D Printer: The Sequel

I’m Printing On A Jet Plane

Almost. MakerBot posts an incredible story of Japanese designer Yoshishiro Shibata, who desperately required a shield for the robot he was taking to Robogames. Why didn’t he just make one? Because he was out of time and actually enroute to the US, flying over the Pacific Ocean. The solution? A quick sketch design and… Continue reading I’m Printing On A Jet Plane

Human Races 3D Printer. Who Won?

Are robots (and 3D printers) taking over the world? Perhaps not yet, but the signs are clearly visible. Some may be concerned with this development, and one person, UK designer Dominic Wilcox, decided to challenge the evil machines with his bare hands! At the Milan Design Week, Wilcox challenged The Machines via Twitter and… Continue reading Human Races 3D Printer. Who Won?

The 3D4D Challenge

There’s a new 3D printing contest about to begin, but this one is a little different. The 3D4D Challenge is focused on charity. Organized by techfortrade and sponsored by 3D printer manufacturer MakerBot and 3D printing consultants Econolyst, the contest commences on May 1st. We can’t say much more about the 3D4D Challenge at… Continue reading The 3D4D Challenge

Thingiverse Terms Changed

3D Model download site Thingiverse has made a dramatic change in its licensing terms. As most startups tend to do, the initial version of legal terms are typically cobbled together from other sources. MakerBot Chief Bre Pettis writes: I went and looked at Blip.tv’s and Etsy’s and Youtube’s and I basically copied them and… Continue reading Thingiverse Terms Changed

The Two Titans of Personal 3D Printing

After CES it now seems we have a two-horse race for the lead in personal 3D printing: MakerBot and 3D Systems. Both announced new printers (the MakerBot Replicator and the Cube), while 3D Systems added a comprehensive 3D community/store/service to compete with MakerBot’s Thingiverse. But that’s about where the similarities end. MakerBot’s philosophy revolves… Continue reading The Two Titans of Personal 3D Printing

3D Printing Buzz Increases

With the close of the 2012 Consumer Electronics Show it seems like a good time to check the buzz level of 3D printing, which we suspect is higher than its ever been. By using Google Trends, a free tool that shows the frequency of search terms used on the omnipresent search engine, we can see… Continue reading 3D Printing Buzz Increases

3D Print Time, Size and Accuracy

With the announcement of MakerBot’s giant Replicator 3D printer, we’re now entering a stage where most personal 3D printers have a significantly large build envelope, typically around 200mm wide by 200mm deep by 150+mm tall. This means we can print big things! But should we? Sure you can print something “twice as large”, but… Continue reading 3D Print Time, Size and Accuracy

Thingiverse Updated

MakerBot’s source for freely available 3D models has been updated. Thingiverse, the repository for thousands of 3D models had a makeover yesterday and now sports a much cleaner look. The site still focuses on the key categories of objects: Who’s Making What? Newest Derivatives, Most Popular Things and the Newest Things, making it pretty… Continue reading Thingiverse Updated

The RepRap Food

Among the numerous successful and unsuccessful 3D printer kits seeking funding on IndieGoGo and Kickstarter is a rather unusual project: The RepRap Food Printer. The project goals are to develop a rudimentary food printer based on the trusted RepRap platform. While many food printing experiments have taken place on previous RepRaps and you can… Continue reading The RepRap Food

A Tour of Buildatron

PC Magazine took a tour of a Brooklyn, NY-based 3D printer manufacturer, and it wasn’t MakerBot. It was Buildatron, an up and coming personal 3D printer operation whose signature feature is a stunning metal case. What did they find? They found a tiny manufacturing space, likely very similar to most other personal 3D printer… Continue reading A Tour of Buildatron

Printrbot Hits The Jackpot

Projects appearing on the Kickstarter public venture funding service sometimes surprise everyone with their success, but Printrbot’s results seem to make all others look bad. Their concept for a personal 3D printer was presented on Kickstarter in hopes of raising enough cash to produce a number of units and launch their business. But get this… Continue reading Printrbot Hits The Jackpot

The List of Personal 3D Printers, 2011

There’s been a rash of low-cost 3D printers emerge recently, so many that it prompted us to write on what we called the “Cambrian Explosion of 3D printers“. But what are these printers? We took the time to zip through our previous posts and came up with what we think might be the definitive list… Continue reading The List of Personal 3D Printers, 2011

Printrbot Exemplifies Ingenuity

We’ve seen a series of experimental personal 3D printers emerge over the past year, some on the KickStarter online funding service. Each experiment has an interesting idea that improves on the ideas of others, gradually moving the state of the art forward. Printrbot, made by builder Brook Drumm, includes some very interesting features, not… Continue reading Printrbot Exemplifies Ingenuity

Get a Free Car From Objet!

Objet, one of the major manufacturers of commercial 3D printers, is offering a complete car at no charge. Well, it’s not a *real* car, it’s only a 3D model of one. You can find it at the link below. Objet produced this model to demonstrate the capabilities of their 3D printer line. What are… Continue reading Get a Free Car From Objet!

Fabbing in Russia

We received a note from the gentlemen at Fabbers.ru, apparently the first company to offer personal 3D printer gear in both Russia and the Ukraine. The new operation resells two 3D printer models: MakerBot’s Thing-O-Matic and the Buildatron. They’re also offering the David 3D Laser Scanner. As 3D printing interest grows, we’ll continue to… Continue reading Fabbing in Russia

Keeping Up! Up

After a series of incremental hardware upgrades, PP3DP recognizes their existing customers might be feeling left out. Therefore they’ve announced an upgrade kit for older PP3DP owners. Had they not done this, owners of older PP3DPs would eventually have had to re-purchase a new model to get the improved features. What’s in the upgrade? Much: … Continue reading Keeping Up! Up

Size Counts?

We often hear people asking the question “How big an object can you print on that thing?” The answer depends on which personal 3D printer you’re talking about, because they vary in size considerably. The public’s thinking seems to be “bigger is better”. We’re not so sure. Not only do personal 3D printers vary… Continue reading Size Counts?

The End of 3mm Filament?

An increasing number of personal 3D printer manufacturers are switching their products from using standard 3mm plastic filament (either ABS or PLA plastic) to a smaller size: 1.75mm. One of the early converts was PP3DP’s Up! 3D printer, which came with a 1.75mm extruder and smaller nozzle to match. In those early days 1.75mm filament… Continue reading The End of 3mm Filament?

Imagined Shopping For 3D Printer Materials

Objet just announced another amazing material for their Connex and Eden 3D printers. This new material, called “High Temperature Material”, not surprisingly provides 3D prints that can withstand high temperature exposure. It can withstand a temperature of +65C (149F) right out of the printer, but if you post-process the object with a “short oven-based,… Continue reading Imagined Shopping For 3D Printer Materials

Tinkercad Gets Funding

First it was MakerBot with a USD$10M injection, and now it’s Tinkercad, that friendly online 3D modeling service that practically anyone can use. They’ve just received a boost of USD$1M from True Ventures with angel investment from Eghosa Omoigui, Taher Haveliwala, Jyri Engestrom, and Joshua Schachter. This is huge news for the small startup… Continue reading Tinkercad Gets Funding

More People Get 3D Printing

Blogger John Geraci’s recent post shows his newfound understanding of the future of 3D printing: he gets it. John’s blog talks about “innovation & entrepreneurship in New York City and beyond”, and this led him, we suspect, to Brooklyn-based MakerBot, the well-known manufacturers of the Thing-O-Matic personal 3D printer and previous models. From there he… Continue reading More People Get 3D Printing

Investing in 3D Printing?

You’ve been reading many articles about 3D printing, or perhaps you’ve seen one. You think (like us) that 3D printing is going to be a Big Thing one day. You want a piece of the action. But how do you do that? Normally you’d select one or more likely companies and simply buy their… Continue reading Investing in 3D Printing?

3D Printed Crabs

No, we’re not talking about pretty little crab toys you can print and hand out to your 8 year old nephew. Instead we’re talking about an innovative project undertaken by one of MakerBot’s artists in residence, Miles Lightwood. The project is concerned with the fate of the lowly Hermit Crab, a crustacean currently facing… Continue reading 3D Printed Crabs

MAKE Talks with Bre

There’s a very long interview with MakerBot Chief Bre Pettis in MAKE magazine that we encourage you to read. We went through it looking for clues to MakerBot’s future plans, especially after their recent gigantic infusion of an astonishing USD$10M from investors. Here’s what we noticed: Bre is still very pumped about MakerBot as… Continue reading MAKE Talks with Bre

More on the Solidoodle 3D Printer

After yesterday’s post on the new Solidoodle 3D printer, we spoke with team leader Sam Cervantes, who answered some key questions were pondering. Fabbaloo: Why another 3D printer? Aren’t there several for sale already? What makes Solidoodle different? Sam Cervantes: Some people love to put complicated machines together and that’s great – it’s… Continue reading More on the Solidoodle 3D Printer

The Mosaic 3D Printer

MakerGear, that wonderful online source for all kinds of 3D printing goodness, launched the Mosaic 3D Printer this past summer. The Mosaic is similar to several other inexpensive 3D printer kits. This item comes in three forms: The basic kit, for USD$799 The “Plus” version for USD$999, which adds a heated build platform and… Continue reading The Mosaic 3D Printer

Foodsafe 3D Printing

Foodsafe is one of those words we keep bumping into. What does it mean, exactly? Well, we’re pretty certain there is an official international standard, complete with a number of specifications, but basically it means you can use the produce for purposes of human consumption. You can eat with it. “But it’s just plastic… Continue reading Foodsafe 3D Printing

3D US Electoral Map or 3D Excel Chart?

We’re always fascinated when someone takes some raw data and somehow converts it into a printable object. Recently Thingiverse user TheNewHobbyist created a great model using the United States Electoral College. For those unfamiliar with obscure US election rituals, it is simply a quantity of votes assigned to each state for purposes of presidential voting. … Continue reading 3D US Electoral Map or 3D Excel Chart?

Faberdashery Sells PLA With a Twist

A new service for 3D printer owners has emerged: Faberdashery. They sell plastic filament that’s suitable for use in several types of popular 3D printers, including MakerBot, Bits From Bytes, Ultimaker and the many variants of RepRap. The difference at Faberdashery, beyond their broad color selection and exclusive sales of PLA, is that they… Continue reading Faberdashery Sells PLA With a Twist

Shapeways Is Three. Is 3D Printing Old?

Shapeways just celebrated its third birthday and while we’re happy to see they’re doing well and continuing to innovate, we asked ourselves if 3D printing is getting old? Shapeways is three years old. Fabbaloo has been posting since late 2007, some four years ago. Objet is twelve years old. Z Corp is sixteen years… Continue reading Shapeways Is Three. Is 3D Printing Old?

Up! Supports Macs

Or will soon, according to a short mention in a recent post on PP3DP’s blog: “The version of software that can be used on MAC will be released soon.” Strangely, this was briefly stated at the tail end of a post on a new platform heating cable. Soon the very powerful but end-user simple… Continue reading Up! Supports Macs

eMaker Increases Capacity in an Unusual Way

You’ll recall that 3D printer manufacturer eMaker recently ran an IndieGoGo campaign to raise funds to kickstart their company. The campaign was wildly successful, raising not their intended USD$30K, but instead well over USD$158K! Today they’ve announced a change in their manufacturing strategy that permits them to produce not 150 machines as was originally… Continue reading eMaker Increases Capacity in an Unusual Way

What’s Next for RapCAD?

Some months ago we wrote about a new 3D modeling software venture, RapCAD. We hadn’t heard too much about it recently, so we thought we’d have a chat with RapCAD chief Giles Bathgate: Fabbaloo: How did you come to be interested in CAD and 3D modeling? Giles Bathgate: From an early age I… Continue reading What’s Next for RapCAD?

A 3D Printer Made of LEGO?

It’s true – Instructables user graphmastur has designed a RepRap-style 3D printer entirely out of LEGO parts. While he was obviously unable to attach a high-temp plastic extruder, he has included a common Sharpie marker pen instead. This enables the LEGO 3D printer to operate as a pen plotter. Why is graphmastur doing this?… Continue reading A 3D Printer Made of LEGO?

Defeating Warping

If there’s one thing that personal 3D printer operators dislike, it must be the evils of warping. Warping, the phenomenon that occurs when a coincidence of material, temperatures, extruder speed and stretching results in printed models that have curled up corners. Typically warping is much more prevalent with ABS plastic and this may have led… Continue reading Defeating Warping

Where’s My 3D Print Button? Part 1

We’ve all seen this button many times. It’s how you produce 2D paper output, and you’ve used it perhaps all your life, maybe every day. It works because it’s easy. It works because it’s familiar. It works because all the hard stuff is already figured out for you behind the scenes. Enter personal 3D… Continue reading Where’s My 3D Print Button? Part 1

Gray Materialises

Who likes gray? It’s a dull, less-than-noticeable color that blends into any background. A gray car? Never! However, there’s something intriguing about i.Materialise’s new 3D printing material: Prime Gray. Objects just seem to look terrific in this color. According to i.Materialise’s Joris Peels: Some of us (OK, me) we’re skeptical about the gray color.… Continue reading Gray Materialises

The BotMill Axis PLUS Assembled 3D Printer

Speaking of assembled 3D printers, which seems to be a sudden trend in the hobby 3D printer industry lately, there’s another one you might want to consider: the BotMill Axis PLUS. This RepRap-based device is priced at only USD$1195, far lower than other assembled 3D printers. Well, it’s not *completely* assembled. BotMill says: “All you… Continue reading The BotMill Axis PLUS Assembled 3D Printer

The RepRap’s Heritage

The eyechart above (click for a larger, almost readable view) represents the family tree for virtually all low-cost 3D printers today. Almost all of them were derived directly or indirectly from the original RepRap project. We’ve written about many of these devices over the past few years, and we expect that this family tree will… Continue reading The RepRap’s Heritage

Bre Pettis on Colbert!

MakerBot Chief Bre Pettis intersected with mainstream media once again on Wednesday’s edition of the Colbert Report. While Colbert speculated on the prospect of a “stack of 3D butts” found after future office parties, there was semi-serious discussion of 3D printing. During the interview, Bre had a Thing-O-Matic operating right in front of the audience.… Continue reading Bre Pettis on Colbert!

ReplicatorG 25 Released

If you’ve got a MakerBot, you’ll want to upgrade to the latest release of ReplicatorG, the software that prepares 3D models for printing on CupCakes, Thing-o-Matics and similar 3D printers. RepG is always undergoing continuous improvement, so it’s no surprise that a new release is out. But this one has some interesting features that should… Continue reading ReplicatorG 25 Released

Cory Doctorow on Big Ideas

Writer and Boing Boing editor Cory Doctorow speaks eloquently in a new podcast on TVO about the future of regulation. Doctorow explains in plain language the troublesome future we may face if computing devices are regulated in the same ways we regulate specialized devices. He points out several examples where this approach simply won’t work… Continue reading Cory Doctorow on Big Ideas

Hands On With The BFB 3000: Operation

In last week’s post we described the unboxing and set up of the BFB 3000 printer, which turned out to be a pretty good experience. Today we’re discussing the operation of the 3000. If you’re like us and have a dose of shiny object syndrome, you’ll definitely like the 3000. It’s a beauty to… Continue reading Hands On With The BFB 3000: Operation

3DDC Results

On April 28th the key players in 3D printing from around the world went to Washington DC to try to influence policy makers on the best future for our technology, organized by Public Knowledge. The fear is that 3D printing could be severely hampered if restrictive regulations and digital property rights are misapplied to 3D… Continue reading 3DDC Results

3D Printing Companies Will Continue To Do Well

One might think that it’s not a good time to invest in 3D printing companies after their latest run up. However, according to a report by analysts at Piper Jaffray: Based on conversations with industry sources and Q1 channel checks, we believe demand in the 3D printing market has improved and we believe… Continue reading 3D Printing Companies Will Continue To Do Well

No Screw Ups After 3D/DC!

For several years now we’ve written about the legal and ethical complications that might occur when 3D printing tech enters the consumer realm. There is no shortage of pathological situations that might arise, be they related to copyright, patents or other regulatory regimes – all of which were designed for prior eras that didn’t include… Continue reading No Screw Ups After 3D/DC!

Stratasys is Certified

Stratasys recently announced that they’ve achieved ISO 9001:2008 certification. For those of you unfamiliar with the intricacies of ISO manufacturing certifications, this particular cert deals with policies and procedures used to develop manufactured products. While the actual ISO documentation is extensive, Wikipedia summarizes this standard using “informal language”: The quality policy is a formal… Continue reading Stratasys is Certified

3D Printing April Fool’s Round Up 2011

Ok, you may have been fooled by Freedom of Creation’s amazing wooden 3D printing post yesterday, but it wasn’t the only fib told in the 3D printing blogosphere on this year’s April Fool’s day. Here’s a compendium of notable tall tales: Freedom of Creation described a quite elaborate secret project to 3D print using… Continue reading 3D Printing April Fool’s Round Up 2011

Attend The thingmakers Conference – For Free!

London, May 4, 2011 is the date for the new thingmakers conference, where many of the creators of 3D printing technology will join with users in an “intense one day conference on the best of 3D printing and customized manufacturing”. According to organizer Ivan Pope: We’re trying to evangelize 3D printing and associated… Continue reading Attend The thingmakers Conference – For Free!

AdderFab!

We’ve been following the folks at Open3DP for a while now as they proceed through experiments in 3D Printing. Lately they’ve been working on perfecting printing molds that have revolutionized the production of RepRap Prusa Mendel 3D printer parts. However, we now see they’re working on an entirely new project: an inexpensive, presumably open-source powder-based… Continue reading AdderFab!

3D Modeling in Your Web Browser

Benjamin Nortier of London is our hero. Why? He’s taken on a huge challenge: create a 3D modelling program that everyone can use. He’s performed an analysis of available 3D modeling tools and came to pretty much the same conclusion we did: tools are too hard, too expensive or not usable for solid modeling. What’s… Continue reading 3D Modeling in Your Web Browser

3D Printer Resellers, Or Not?

In the battle for personal 3D printer supremacy, the leading manufacturers seem to have chosen different approaches to sales. MakerBot, 3D Systems, PP3DP, BotMill and others MakerBot, BotMill and many of the smaller participants tend to sell directly to clients from their websites. Perhaps this makes sense as these smaller companies don’t yet have… Continue reading 3D Printer Resellers, Or Not?

Essential Calibration

You’ve assembled your 3D printer after great effort and are anxiously awaiting your first printout. It will be amazing. It will shock everyone watching. Printing an actual object! But it turns out to be a sullen lump of misshapen plastic. This is the dilemma of many who assemble their own 3D printer. The… Continue reading Essential Calibration

The Different Flavors of Home 3D Printers

We’ve been reading a long thread on the MakerBot Operator’s Google Group initiated by Shawn M, who is considering purchasing a MakerBot Thing-O-Matic 3D printer. He asks about the level of effort required to produce high-quality parts with this particular device. As is often the case, a simple question led to some insights. A… Continue reading The Different Flavors of Home 3D Printers

Color 3D Printing At Home

It’s possible to buy a color 3D printer, but they’re currently very expensive, such as those from ZCorp. Meanwhile, typical home 3D printers are monochrome, at least until you change the input plastic filament. The good news is that the selection of filament colors continues to increase and now includes quite a variety beyond simple… Continue reading Color 3D Printing At Home

Scott Elliot Invents an Insert

Scott Elliot, owner of a very busy Solido SD300 plastic-sheet 3D printer has come up with yet another amazing design: shipping inserts to ensure safe travels for package contents. Since Scott uses the SD300, he is able to print items not possible with other extrusion-based devices. The plastic sheet approach can print objects with… Continue reading Scott Elliot Invents an Insert

3D Printing In The News

This week saw not one, but two big media splashes for 3D Printing: First, a New York Times article introduced the topic to their readers, and secondly (perhaps triggered by the NYT article) MakerBot chief Bre Prettis was interviewed live on CNN in front of (presumably) millions. There was also a brief mention in Scientific… Continue reading 3D Printing In The News

2011: The Year of 3D Printing?

Richard of Capolight Electronics Projects examines the popularity of 3D printing over time and asks the question, “How popular will it be this time next year?” His investigation involved use of Google Insight, a free service that shows the popularity of terms over time. By searching for typical 3D printing terminology, like “Extruder”, “RepRap”,… Continue reading 2011: The Year of 3D Printing?

Crossing the 3D Printer Chasm

Following up on this post speculating on 10,000 MakerBots in 2011, we’re thinking of what steps MakerBot (or any other 3D Printer company) might consider to “Cross the Chasm”. The “Chasm” refers to a social scenario that often occurs as a business grows. At first their clients are enthusiastic early adopters, capable of accepting… Continue reading Crossing the 3D Printer Chasm

3D Printing in 2010

A year ago we posted our “wishes for 2010“. Did any of them come true? Let’s take a look: A consumer capable 3D printer: This didn’t happen, but clearly big steps were taken in that direction. Three events were key for us: MakerBot’s Thing-O-Matic, which automated much of the operation of a 3D printer… Continue reading 3D Printing in 2010

Make-A-Bot

Charles Guan is the mastermind behind the experimental Make-A-Bot, a new 3D printer of (mostly) his own design. Based on a combination of MakerBot and RepRap tech, this interesting printer makes extensive use of water-jet cut aluminum, with acrylic and wooden components as well. The printer uses a MakerBot Mk5 plastruder, but has a… Continue reading Make-A-Bot

Idea: What Can I Model For You?

We re-read last week’s post on the new “What Can I Make For You?” service and had an idea. If you recall, the WCIMFY service was quite simple: type what you want (in natural language) into a box and hit submit. The service then figures out how to match your desired “thing” with someone who… Continue reading Idea: What Can I Model For You?

Hands On With the PP3DP Up! 3D Printer

Meet Phil Letourneau, an Up! 3D Printer Operator. This week Phil dropped by the Fabbaloo office to demonstrate the rarely seen Up! 3D Printer. We put this elusive device put through some basic tests to see how it works. The result? Overall, we’re pretty impressed – but there are some caveats. Here’s what we found:… Continue reading Hands On With the PP3DP Up! 3D Printer

Breaking: 3D Print Retail Store Opens

We’ve just learned that Materialise has opened a retail store dedicated to selling high-end 3D printed goods. This, we believe, is the first such store ever in existence, and follows on the earlier announcement of MakerBot selling their 3D printer in a retail setting. The new store, operated by Materialise’s .MGX venture, specializes in… Continue reading Breaking: 3D Print Retail Store Opens

My Head’s Going To Explode!

That’s what MakerBot Chief Bre Prettis says in this video report on low-cost 3D printing from Reuters. The well-known news agency put together this piece to explain the topic to the vast majority of people who simply don’t know that 3D printing is not only possible, but inexpensive. Bre’s comment in full: Our… Continue reading My Head’s Going To Explode!

Thing-O-Matic Nears Release

Just posted on the MakerBot site: the advanced hobbyist Thing-O-Matic 3D Printer is about to start shipping this Friday. Those who’ve ordered the device in advance will receive their shipment in the order it was received by MakerBot. The new printer is perhaps the most advanced hobbyist 3D printer kit available, including a precision… Continue reading Thing-O-Matic Nears Release

Get Your 3D Printer At The Store Today

No, you can’t buy them at Best Buy yet, but we’re hoping you will within a few years. Meanwhile, you actually CAN buy a 3D printer at a corner store right off the shelf, if you happen to live in a particular Brooklyn, NY neighborhood. That’s right, MakerBot Industries has opened a Retail… Continue reading Get Your 3D Printer At The Store Today

MakerFactory.com

As often is the case, and experiment leads to a hobby, leads to a business and sometimes to a multinational corporation. In this case the experiment was Vernon Effalo’s effort to build a dome. He required a large number of dodecahedrons and simply outsourced it to other makers, which eventually enabled him to complete the… Continue reading MakerFactory.com

Battle at EuroMold

EuroMold is a massive trade conference held in Frankfurt each year, billed as “World Fair for Moldmaking and Tooling, Design and Application Development”. According to European Plastics News, this year poses to be a showdown among low-cost 3D Printer manufacturers. We add that it’s actually just the *commercial* 3D printer manufacturers, as we could not… Continue reading Battle at EuroMold

New 3D Modeling Interfaces Get All Touchy

The other week a surprise announcement from Interactive Fabrication described their “Beautiful Modeler”, essentially a touch-based iPad interface to a 3D modeling program. Nice! Also recently the MakerBot Blog reported on Dries Verbruggen demonstrating a no-touch motion-detecting way to sculpt a vase – which was then 3D printed to the delight of onlookers. Also… Continue reading New 3D Modeling Interfaces Get All Touchy

The Ultimate Home 3D Printing Setup: Hardware

So you want to get into 3D Printing at home? What do you need? How do you get started? A printer, obviously, but what else might be useful in your ultimate configuration? Here are our ideas: A Low Cost 3D Printer: Lots of ultra-low cost (~USD$1000) options here, including kit-based RapMan or MakerBot, or… Continue reading The Ultimate Home 3D Printing Setup: Hardware

One Really Big Replicator

Thingiverse member KurtCircuit has designed a rather enormous device: a 3D printer that is theoretically capable of printing 1m cube-sized objects. Even more astonishing is the fact that he’s actually building this device! The massive device, known as the “Scalable Largescale Cartesian Bot”, apparently uses RepRap-derived principles, and is likely the biggest 3D printer… Continue reading One Really Big Replicator

Bre’s Pumped!

We’re still excited by 3D System’s acquisition of BfB, and we’re not the only ones excited. We wondered how this move would affect BfB’s biggest competitor, MakerBot. Would 3D System’s massive resources put such a push into BfB that MakerBot would be sidelined? We contacted MakerBot mandarin Bre Prettis for his thoughts: I wish… Continue reading Bre’s Pumped!

Commercial 3D Printer Price Drops?

Apparently Objet has reduced the price of their low-end Alaris 30 3D printer to less than USD$25,000. We say “low-end” but this is only a relative term: The Alaris 30 is a much more refined printer than the hobbyist kits we also blog about. Nevertheless, this is a significant development, as it shows how the… Continue reading Commercial 3D Printer Price Drops?

Stockbrokers Looking Into 3D Printing

With all the kerfuffle last week (Shapeways gets major investment, New MakerBot 3D printer shown at NYC MakerFaire, Massive New York Times article) it seems that at least a few stockbrokers are taking notice of the 3D print industry. The broker we spoke with actually “got it” and could not stop talking about how this… Continue reading Stockbrokers Looking Into 3D Printing

Why 3D Systems Chose BfB

After Tuesday’s big announcement of 3D Systems acquiring Bits From Bytes, we wondered why 3DS chose to acquire BfB instead of the other major hobbyist 3D printer manufacturer, MakerBot. To get answers we asked 3D Systems VP of Marketing Cathy Lewis, who explained the reasons quite clearly: They have demonstrated execution and achieved the… Continue reading Why 3D Systems Chose BfB

Blockbuster Announcement: 3D Systems Acquires Bits From Bytes!

In a totally stunning announcement today 3D Systems has acquired the Bits From Bytes operation based in Bristol, UK. This is perhaps the biggest corporate manoeuvre we’ve yet seen in the 3D printer space, and heralds a bold move by 3D Systems into the ultra low-end 3D printer market, now competing directly against such… Continue reading Blockbuster Announcement: 3D Systems Acquires Bits From Bytes!