Orbex has commissioned what will apparently be the largest industrial 3D printer in Europe.
metal
New Soft, Stretchable Metal Can Be 3D Printed
While attempts to develop a new material may not always pan out, a successful attempt in 2018 has led to ongoing research and new potentials.
Digital Metal Adds Copper Material To Their 3D Print Portfolio
Digital Metal announced the availability of copper material for their metal 3D printer.
Mantle Emerges With Low-Cost, High-Precision Metal 3D Printer
You probably haven’t heard of Mantle, and that’s because they’ve been in stealth mode until this week.
Metal 3D Printing Powders Consolidation: ALTANA Completes TLS Acquisition
ALTANA has completed its acquisition of TLS, focusing on the metal 3D printing powder market.
Implications Of NIST’s $4 Million Support For Metal Additive Manufacturing
At the end of 2020, the NIST awarded almost $4 million in grants supporting metal 3D printing measurement methods and standards.
MakerBot’s Metal 3D Printing Option
MakerBot announced a new way to 3D print metal on their equipment.
Xact Metal Makes Major Step Forward With GoEngineer Partnership
Xact Metal announced a key partnership with GoEngineer.
Lost Air Casting: From Popsicles To Ironworks
Janne Kyttanen’s 3D printed popsicle process is a lot more powerful than I realized.
Rapidia-ExOne Deal Shows Challenges And Opportunities
The partnership involving ExOne and Rapidia highlights some of the problems in 3D printing these days.
ExOne Enters The Office Metal 3D Printing Scene
There’s a new office-friendly metal 3D printing system on the market as ExOne and Rapidia introduce the Metal Designlab 3D printer and X1F furnace.
Catching Heat for Metal Additive Manufacturing
Engineers, scientists, and manufacturing experts around the world are in a frustrating spot when it comes to additive manufacturing (AM).
Xerox Unveils ElemX 3D Printer Installation And Collaboration
The first Xerox metal 3D printer installation is more than a customer sale: it’s the start of a collaboration with the Naval Postgraduate School.
Desktop Metal Introduces Two-Step Metal 3D Printing With Studio System 2
The key word is “easy” for the latest metal 3D printing launch from Desktop Metal.
Wayland Additive Releases More Details On NeuBeam
UK-based Wayland Additive has released some additional details of their unusual NeuBeam metal 3D printing process.
Robot Bike Company Turns to solidThinking for Custom Mountain Bikes
As more manufacturers combine additive manufacturing (AM) processes with innovative design techniques using modern software, the products once thought of as “one-size-fits-all” are becoming increasingly personalized.
We May See Very Large Metal 3D Printers In The Future
It’s likely we will see increasingly larger 3D printers in the future.
Intech Launches Large-Format Metal 3D Printer
Intech Additive Solutions announced a new metal 3D printers that has a much bigger build volume.
Surface Finish in Metal Additive Manufacturing
Additive manufacturing (AM) can now produce high-quality parts in metal alloys.
Desktop Metal Production System Is A 3D Printing Production Lineup
Desktop Metal’s Production System isn’t just a system: it’s a lineup, now including a new 3D printer to bridge the gap between process development and mass production.
The Dog Bone Problem: How The Virtual Foundry 3D Prints Metal
I spoke with The Virtual Foundry to find out more about their unusual metal 3D printing approach.
New Superalloy Class Points To Defect-Free Metal 3D Printing
Research may have identified a new class of 3D printable metals that can overcome current limitations.
Pure Copper 3D Printing
Desktop Metal has introduced a pure copper material to be 3D printed on their Studio System.
In-Depth With Live Sinter
Desktop Metal recently introduced a new software tool focusing on metal sintering simulation; the team behind Live Sinter shares a deeper look.
Dialing In 3D Printing Parameters With Machine Learning
The process of “dialing in” optimal 3D print parameters can be challenging, but how is this best done in a rapidly evolving industrial environment?
Meltio Announces Hybrid Manufacturing Option
Meltio announced the “Meltio Engine”, a hardware upgrade for CNC equipment to combine additive and subtractive manufacturing capabilities.
The Mysterious Seurat Metal 3D Printer
I’ve been investigating the rather quiet company Seurat Technologies, which is developing a new metal 3D printing process.
Xact Metal Makes Copper 3D Printing Inexpensive
Xact Metal has adapted their inexpensive metal 3D printer technology to enable the use of copper material.
Relativity Space Raises A Half Billion!
Rocket-maker Relativity Space is about to collect a whopping US$500M in a Series D raise.
Desktop Metal’s Shop System Is Out In The World
Desktop Metal’s mid-volume metal 3D printing offering, the Shop System, is now shipping globally.
Additive Industries Lands An Important Partnership
Additive Industries announced a partnership with Makino, and this should enable the company to provide significant additional functionality.
Additive Assurance’s Revolutionary Quality Control System, AMiRIS
A startup company has developed a unique method of certifying the quality of 3D printed metal parts.
SLM Solution’s “Miracle Machine”: The NXG XII 600
SLM Solutions has released a breakthrough metal 3D printer, the massive NXG XII 600.
Desktop Metal Continues AM Software Focus With Live Sinter
Sintering is a necessary step in metal 3D printing, and a new software application targets accurate compensation for distortions.
Racing the Clock with Help from Carbon Capture and 3D Printing
Charles Goulding Jr. examines the possibilities for use of 3D printing in carbon capture equipment.
Looking At Hurdles To Serial Additive Manufacturing Production
I’m reading a post by Markus Seibold about serial production using additive manufacturing and there is a great deal of wisdom in his thoughts.
Relativity Space Bags Major 3D Printed Rocket Client
Relativity Space has landed a major client, Lockheed.
Eleven 3D Printed Parts On NASA’s Perseverance Rover
NASA has revealed their use of 3D printed parts on the Perseverance rover, currently en route to the planet Mars.
VELO3D Announces The Extra Capacity Sapphire XC Metal 3D Printer
VELO3D suddenly announced a brand new 3D printer, the Sapphire XC, which is far larger and much faster than their previous 3D printers.
Elcan: Sifting Through The Metal 3D Printing Powder
Charles R. Goulding and Peter Favata discuss the importance of quality for metal 3D printing materials.
The B-52 Bomber’s First 3D Printed Engine Part
The U.S. Air Force 3D printed a metal engine part to keep the B-52 Bomber in service until new engines are fitted in the late 2020s.
Farsoon Reports Doubled Growth In 2020
Farsoon said the company has doubled its revenue so far in 2020, defying the overall economic downturn caused by the pandemic.
3D Printing Ocean Turbines
Renishaw has joined hands with the Nova Scotia Community College (NSCC) to produce two of the parts used in ocean turbines with the use of additive manufacturing.
Alloyed Tests Functional Nickel Superalloy For High-Temperature AM
Alloyed announced the results of a project they’ve undertaken with Honeywell Aviation to assess a new high-temperature metal powder for aerospace applications.
GE Aviation Receives Certification For Partly 3D Printed Jet Engine
GE Aviation has received official certification from the US FAA for its massive GE9X jet engine.
NASA Looks To Large-Scale 3D Printing For The Future Of Rocket Engines
As NASA continues to ramp up its work to explore space, 3D printing is taking its place among the stars — or at least the rockets that will get us there.
3D Printed Pumping Iron
Charles R. Goulding and Adam Friedman pump up the use of 3D printing to take a look at gym equipment.
Why Are There So Many New AM Metal Powder Companies?
I had a thought about why there are a number of new entrants to the AM metal powder market.
Million Dollar Air Force Contract Will Repair Parts With 3D Printing
Additive manufacturing company Optomec was awarded a $1 million contract by the U.S. Air Force to repair engine turbine parts.
A New Player Has Entered The Metal 3D Printing Powder Game: ALTANA
There is news about what appears to be a new player in the metal 3D printing powder market: ALTANA.
Additive Industries Partners With Sigma Labs On PrintRite3D
Additive Industries announced a partnership with Sigma Labs to allow use of PrintRite3D on their equipment.
3D Printed Components Enable Enhanced CO2 Capture
A test device made by the Oak Ridge National Lab has developed a prototype device that can more efficiently capture CO2.
Xometry x ExOne: Binder Jetting Joins Digital RFQ Marketplace
On-demand manufacturing platform Xometry is expanding its 3D printing offerings, bringing on ExOne metal binder jetting capabilities.
Wayland Additive Sets NeuBeam Target For January
Wayland Additive is set to release their NeuBeam metal 3D printer this coming January.
SLM Solutions Grows 90%? What Happened?
SLM Solutions announced their revenue grew an astonishing 90% in the first half of the year. How did they accomplish this during a pandemic?
Yes, There’s Another Microwave-Based 3D Printing Process
When I saw 3DSLA.RU’s unusual microwave-based 3D printer last November at Formnext, I thought it was the only one. I was wrong.
When Complex Internal Structures Are Cricket Tubes
3D printing is well known for creating complex designs with intricate internal structures; sometimes those structures serve as tubes for crickets.
Another Additive Manufacturing Company Pivots
Along with loss and grief, the pandemic has caused a great deal of change. One of those changes has been in 3D printing.
Porsche’s 3D Printed Pistons Demonstrate High Efficiency
An interesting experiment in metal 3D printing has resulted in some rather efficient pistons for Porsche sports cars.
MX3D Completes 3D Printed Robot Arm Project
When we last saw MX3D at Formnext 2019, they were showing off a 3D printed robot arm. Now, they’ve tested it in a working robotic system.
Holographic 3D Printing With Multiple Lasers
Researchers at the University of Cambridge have developed a method of using holography in 3D printing.
The Secret Recoater Blades of Open Additive’s PANDA 3D Printer
The world of 3D printer recoaters is even more complex after learning more about Open Additive’s approach.
All About 3D Printer Recoater Blades
I’m reading a fascinating piece by Additive Manufacturing Consultant Michael Wohlfart discussing the different types of recoaters one might use.
6K Additive Makes Some Big Moves
6K Additive has commissioned their first units and at the same time has landed a sustainable client.
Finely-Detailed Metal 3D Prints From The Incus Hammer Lab35
Today I’m looking at a 3D printer I had not seen before, the Incus Hammer Lab35.
Relativity Space Scores Another 3D Printed Rocket Client
Big news: rocket startup Relativity Space has signed a deal with their fifth launch client, Iridium.
Can 3D Printed Thermoplastics Replace Metal?
A question being asked is whether a plastic 3D printed part could replace a metal part, and the answer is increasingly, “Yes!”
Complex 3D Printed Magnetic Structures
Researchers have demonstrated an approach for creating 3D printed magnetic structures with high resolution.
Aftermarket Parts: Another 3D Printing Niche?
Could aftermarket parts be a niche application for 3D printing? I think it has huge potential.
Open Additive Opens Up Metal Additive Manufacturing
We caught up recently with Open Additive for a look into how they plan to open up metal additive manufacturing with an affordable, open platform.
Sigma Labs Crosses The Bridge Between Features And Functions In Metal 3D Printing Software
Sigma Labs has been hard at work with its quality control solutions for metal 3D printing: the company’s CEO fills us in on major advances.
Even More Investment For VELO3D
VELO3D has unexpectedly received an investment of US$12M.
2020 Update: Carbon Fiber 3D Printing
Why is composite 3D printing so important, and what role does Carbon Fiber play?
3DEO Hits A Production 3D Print Milestone
Metal manufacturing service 3DEO announced they’ve produced 150,000 metal parts using their unique process.
ExOne’s #MakeMetalGreen Campaign Highlights Industry’s Lack of Knowledge
ExOne launched a new social media campaign a few weeks ago focusing on the green aspects of 3D printing, but why do they need to do that at all?
New Method Of Measuring Metal 3D Printed Part Strength
Researchers in the US military have developed a set of tests to determine the strength of 3D printed parts that could aid in future metal 3D printing quality control.
GE’s Additive Manufacturing Project for the U.S. Air Force Takes off
The great promise of 3D printing combined with innovative 3D design (such as generative design) is to reduce parts and material waste while creating geometry that surpasses the capability of traditional subtractive machining.
Overcoming The Performance Barrier To Full-On Radical 3D Printing
There’s a key barrier that’s holding back 3D printing from much more radical use, but it may be about to break down.
Falcontech To Take FIFTY Farsoon Metal 3D Printers
Farsoon announced a monstrously huge deal with Falcontech to provide the AM service with no fewer than 50 advanced metal 3D printers.
EOS Focuses On Metal 3D Print Safety
A technical notice recently issued by EOS to their clients regarding 3D print metal condensate safety.
Design of the Week: ‘Tater Hammer
This week’s selection is the ‘Tater Hammer by designer Eric Au of Metro’s Q-Branch.
Researchers Develop New Ultrafast Additive Manufacturing Technique
Researchers have developed an unusual metal 3D printing process that requires no post processing, electrostatic hydrodynamic redox.
Secrets Behind VELO3D’s Decision To Build A “Stretch” Metal 3D Printer
I spoke with VELO3D’s Zach Murphree to find out more details on the company’s recent announcement of a tall version of their popular metal 3D printer.
Rocket Crafters Tests STAR-3D 3D Printed Rocket Engine
Rocket Crafters has concluded testing of their revolutionary 3D printed hybrid rocket engine.
Book of the Week: Additive Manufacturing for the Aerospace Industry
This week’s selection is “Additive Manufacturing for the Aerospace Industry” by Francis H. Froes and Rodney Boyer.
Identifying Alternative Metal 3D Printing Customers
Charles R. Goulding examines metal 3D printing applications outside of automotive and aerospace.
Wayland Additive’s NeuBeam Metal 3D Printing Process
Wayland Additive has introduced a new form of metal 3D printing they call “NeuBeam” that should be superior to laser or electron beam processes.
CHIRON Group’s First Metal 3D Printer
A manufacturing equipment provider has developed their own metal 3D printer.
Analyzing The Upside-Down SLEDM Metal 3D Printing Process
Researchers have developed an unusual metal 3D printing process called SLEDM, which uses LEDs instead of lasers. But could it actually work as defined?
An Enormous Metal 3D Printer Heads To Protolabs
Minnesota-based Protolabs plans on firing up a GE Additive Concept Laser X Line 2000R metal 3D printer late this year, and there’s a good reason why they’re doing so.
SPEE3D’s Anti-Viral Copper 3D Prints Deployed
A validated COVID-19 utility solution announced by SPEE3D has now been adopted by a government agency.
VELO3D Announces Unusual Aluminum Metal Material
VELO3D announced the availability of a new alloy of aluminum for use in their Sapphire series of metal 3D printers, and it has some very unique properties.
Relativity Space to Launch First 3D-Printed Rocket
Relativity Space is currently working on its first rocket, the Terran 1, 3D printed with its own robotic printer, the Stargate.
GE Layoffs Suggest Problems Ahead For Metal 3D Printing
GE announced it is cutting loose another 13,000 jobs, and this may have big implications for the 3D printing industry.
Progress With Desktop Metal’s Newest 3D Printing Systems
In the last few months, Desktop Metal has introduced its Shop System and Fiber setup; we caught up to discuss progress and updates.