Skip to content
Fabbaloo

Fabbaloo

  • About Us
  • News Sections
    • Corporate
    • Usage
    • Design
    • Event
    • Hardware
    • Ideas
    • Service
    • Software
  • Subscribe
  • Advertise
  • 3D Printing FAQs
    • How Does 3D Printing Work
    • 3D Printing Tips
    • How To Make 3D Printer More Accurate
  • Contact

desktop

This One Trick Makes Your FFF 3D Printer a Bit Safer

There’s one trick you should be doing to keep your workspace safer when 3D printing.

Hands On With The Bambu Lab P2S Combo, Part 4

Our look at the Bambu Lab P2S desktop 3D printer concludes with software, print results and final thoughts. This is part four of a four part series, please read parts one, two and three. Bambu Lab P2S Software For our tests we used Bambu Lab’s default software options, which are BambuStudio (desktop) and Bambu Handy… Continue reading Hands On With The Bambu Lab P2S Combo, Part 4

Hands On With The Bambu Lab P2S Combo, Part 3

Our review of the Bambu Lab P2S desktop 3D printer continues with a deep look at operations. This is part three of a four part series, please read parts one, two and four. Bambu Lab P2S Combo Operations The P2S can’t do anything without filament, so I had to load some up. This involves placing… Continue reading Hands On With The Bambu Lab P2S Combo, Part 3

Hands On With The Bambu Lab P2S Combo, Part 2

Our review of the Bambu Lab P2S desktop 3D printer continues with a look at assembly and configuration. This is part two of a four part series, please read parts one, three and four. Bambu Lab P2S Combo Unboxing and Assembly We’re testing the “combo” unit, which means that there is not only the 3D… Continue reading Hands On With The Bambu Lab P2S Combo, Part 2

Hands On With The Bambu Lab P2S Combo, Part 1

We’re a bit late to the party, but we’ve just completed a long test of the new Bambu Lab P2S desktop 3D printer. This is part one of a four part series, please read parts two, three and four. Bambu Lab Combo P2S Background The P2S is Bambu Lab’s latest device, replacing the P1S that… Continue reading Hands On With The Bambu Lab P2S Combo, Part 1

Is the TOP.E R1 the First Desktop 5-Axis 3D Printer? 

Could this new device be the first desktop 5-axis 3D printer?

Bambu Lab Discontinues P1P 3D Printer, Commits to Support Through 2031

Bambu Lab has retired the venerable P1P 3D printer.

Creality Teases M1/R1 Filament Shredder and Extruder for In-House Filament Recycling

Creality is to launch a filament recycling system, the M1 / R1.

Hands On With The Elegoo Centauri Carbon 2 Combo, Part 3

Our look at the new Centauri Carbon 2 3D printer from Elegoo concludes with Software, Print Results, and Final Thoughts.

Hands On With The Elegoo Centauri Carbon 2 Combo, Part 2

Our look at the new Centauri Carbon 2 3D printer from Elegoo continues with Setup, Calibration, and Operations.

Hands On With The Elegoo Centauri Carbon 2 Combo, Part 1

We’ve been quietly testing the new Centauri Carbon 2 3D printer from Elegoo.

Hands On With Our Hands On 3D Printing Reviews, 2025 Edition

An update to our comprehensive list of our hands on equipment, software and material reviews.

Hands on with the Creality K2 Pro Combo, Part 4

Our look at the Creality K2 Pro Combo 3D printer concludes with final thoughts. This is part four of a four part series, please read parts one, two and three. Creality K2 Pro Combo Final Thoughts Much like the smaller K2, the K2 Pro Combo’s packaging has been well thought out. Not only does it… Continue reading Hands on with the Creality K2 Pro Combo, Part 4

Hands on with the Creality K2 Pro Combo, Part 3

Our review of the Creality K2 Pro Combo 3D printer continues with a look at print results. This is part three of a four part series, please read parts one, two and four. Creality K2 Pro Combo Print Results The first job we sliced consisted of several calibration tests that we typically run, all combined… Continue reading Hands on with the Creality K2 Pro Combo, Part 3

Hands on with the Creality K2 Pro Combo, Part 2

Our review of the Creality K2 Pro Combo 3D printer continues with a look at setup, calibration, operations and software. This is part two of a four part series, please read parts one, three and four. Creality K2 Pro Combo Setup and Calibration When we flipped the power switch on the K2 Pro, it powered… Continue reading Hands on with the Creality K2 Pro Combo, Part 2

Hands on with the Creality K2 Pro Combo, Part 1

We’ve just finished testing Creality’s K2 Pro Combo 3D printer. This is part one of a four part series, please read parts two, three and four. Creality K2 Pro Combo Background Shenzhen Creality 3D Technology Co., Ltd., better known as Creality, is one of the leading brands in desktop 3D printers, established in 2014. Creality… Continue reading Hands on with the Creality K2 Pro Combo, Part 1

Palette 300 Enters Low-Waste FFF Market With Rotating 12-Nozzle System

AtomForm has launched a new multicolor 3D printer, the Palette 300.

Anycubic Launches Kobra X 3D Printer With First-of-Its-Kind “3D Print Guarantee” Program

Anycubic has launched a very unusual “3D print guarantee” along with their new Kobra X 3D printer.

Red Flags Suggest Caution for the K-100 SLS 3D Printer Launch

Surprise! There’s a new 3D printer on Kickstarter, but this one uses SLS, not FFF.

Creality Quietly Introduces New “Spark X” Brand Focused on Automated, AI-Enhanced 3D Printing

Creality quietly announced something called “Spark X” last week.

In-House 3D Printing in Radiology Signals Erosion of Market for High-Cost Commercial Systems

A 3D printing usage story suggests the days could be numbered for some expensive 3D printing options.

Anycubic’s Kobra X has Four-Channel Extrusion and Up to 19-Color Capability

Anycubic announced a new desktop FFF 3D printer, the Kobra X.

Bambu Lab P2S Cleared for U.S. Sales After Delay, Ending Weeks of Speculation

Bambu Lab’s P2S is finally out of US jail and can be ordered.

New Vortek Upgrade Pricing Reveals DIY Path to H2C Performance

Bambu Lab announced pricing and details for a Vortek upgrade to the H2D and H2S 3D printers.

Bambu Lab Launches H2C With New Vortek Hot-End Swapping System

As promised, Bambu Lab released the much anticipated H2C 3D printer today.

Investigating Creality’s Black Friday Deals

It’s that time of year again, and there are quite a few Black Friday sales on for desktop 3D printers.

QIDI Max4 Redefines Affordable Professional 3D Printing with High-Performance Design

QIDI’s new Max4 is quite a powerful desktop 3D printer.

Anycubic’s Photon P1, the First Dual-Vat Multicolor Desktop Resin 3D Printer

Anycubic is readying a new resin 3D printer, the Photon P1.

Anycubic Launches Kobra S1 Max Combo with Larger Build Volume and Enhanced Material Capabilities

Anycubic revealed their latest desktop 3D printer: the Kobra S1 Max Combo.

Do You Need a Resin Vacuum?

Is it the month for crazy 3D printing gadgets?

Elegoo Confirms Centauri Carbon 2 Launch with Built-In Multicolor System

Elegoo has officially mentioned the new Centauri Carbon 2 3D printer, suggesting a release soon.

Prusa Launches Larger CORE One L 3D Printer

Prusa Research suddenly announced the CORE One L 3D printer.

FibreSeek Reveals $2,399 Continuous Carbon Fiber 3D Printer Price

Fibreseeker has revealed more details about their price-breaking continuous carbon fiber 3D printer.

Why Hasn’t Bambu Lab Entered the Resin 3D Printing Market?

Why hasn’t Bambu Lab announced a resin 3D printer?

Hands On with the Creality K2 Combo 3D Printer, Part 4

Our look at the Creality K2 Combo 3D printer concludes with final thoughts.

Hands On with the Creality K2 Combo 3D Printer, Part 3

Our look at the Creality K2 Combo 3D printer continues with print results.

Hands On with the Creality K2 Combo 3D Printer, Part 2

Our look at the Creality K2 Combo 3D printer continues with a look at operations and software. This is part two of a four part series, please read parts one, three and four. Creality K2 Combo Operations Browsing the K2’s interface we found the menus to be very intuitive, with all the typical important system… Continue reading Hands On with the Creality K2 Combo 3D Printer, Part 2

Hands On with the Creality K2 Combo 3D Printer, Part 1

We’re testing the Creality K2 Combo 3D printer this week.

Elegoo Quietly Launches Centauri Carbon 2 in China, Adding Multicolor Printing

Elegoo announced the Centauri Carbon 2 — on their China site.

Anycubic’s Kobra 3 V2: Faster, Smarter, and Capable of Eight-Color 3D Printing

Anycubic’s Kobra 3 V2 desktop FFF 3D printer looks like a reasonable upgrade over the Kobra 3.

Bambu Lab Confirms October 14 Launch Date for Upcoming P2S 3D Printer

Bambu Lab just set a date of October 14th to announce the new P2S.

Hands On with the Bambu Lab H2D 3D Printer, Part 3

Our look at Bambu Lab’s amazing H2D 3D printer concludes with software, print results and final thoughts.

Hands On with the Bambu Lab H2D 3D Printer, Part 2

Our hands on review of Bambu Lab’s amazing H2D 3D printer continues with a look at operations.

Hands On with the Bambu Lab H2D 3D Printer, Part 1

We’ve finally completed our very long test of Bambu Lab’s amazing H2D 3D printer.

Nanoe Demonstrates Ceramic and Metal 3D Printing on Standard Bambu Lab Desktop Printers

Is it possible to 3D print advanced ceramics and metals on a desktop Bambu Lab 3D printer?

Hands On With The Bambu Lab H2S 3D Printer, Part 4

Our look at the new Bambu Lab H2S desktop 3D printer concludes with final thoughts.

Hands On With The Bambu Lab H2S 3D Printer, Part 3

Our look at the new Bambu Lab H2S desktop 3D printer continues with operations.

Hands On With The Bambu Lab H2S 3D Printer, Part 2

Our look at the new BamOur look at the new Bambu Lab H2S desktop 3D printer continues with unboxing, assembly and calibration.

Hands On With The Bambu Lab H2S 3D Printer, Part 1

We’ve been secretly testing the new Bambu Lab H2S desktop 3D printer for a while, and here are our findings.

Bambu Lab Introduces Single-Nozzle H2S Combo with Large Build Volume and Advanced Features

It’s here: Bambu Lab announced the new H2S 3D printer today.

Creality Releases K2 Pro Combo 3D Printer with Multicolor CFS System

Creality finally released the K2 Pro 3D printer, something we’ve anticipated for a while.

New Yumi C Series 3D Printers Offer Low-Cost Multicolor Printing with Reduced Waste

A new 3D printer has appeared on Kickstarter: the Yumi C series.

Release Date Still Unknown for Flashforge’s CJ270 Full-Color 3D Printer

Where is the Flashforge full-color 3D printer?

FibreSeeker 3 Brings Continuous Carbon Fiber 3D Printing to the Personal Desktop Market

After several months of waiting, they’ve finally announced FibreSeeker, the first personal continuous carbon fibre 3D printer.

Bambu Lab Launches H2D Pro with Expanded Material Support

Surprise! Bambu Lab announced a new 3D printer today, the H2D Pro.

SALTGATOR Offers Fast Part Production Using 3D Printed Molds and Soft Gel Materials

The SALTGATOR is not a 3D printer, but it’s something 3D printer operators might consider.

Hands on with the Creality Hi 3D Printer, Part 4

Our test of the new Creality Hi Combo multicolor 3D printer concludes with final thoughts. This is part four of a four-part series, please read parts one, two and three. Creality Hi Combo Final Thoughts The Creality Hi Combo was packaged very well for shipping, and the QR code on an inner box flap was… Continue reading Hands on with the Creality Hi 3D Printer, Part 4

Hands on with the Creality Hi 3D Printer, Part 3

Our review of the new Creality Hi Combo multicolor 3D printer continues with print results. This is part three of a four-part series, please read parts one, two and four. Creality Hi Combo Print Results We finished off the sample coil of hyper filament by going through some typical test prints at a 0.2mm layer… Continue reading Hands on with the Creality Hi 3D Printer, Part 3

Hands on with the Creality Hi 3D Printer, Part 2

Our review of the new Creality Hi Combo multicolor 3D printer continues with setup, calibration, operations and software. This is part two of a four-part series, please read parts one, three and four. Creality Hi Combo Setup and Calibration Initial setup of the printer was very easy, and the touchscreen walked us through all the… Continue reading Hands on with the Creality Hi 3D Printer, Part 2

Hands on with the Creality Hi 3D Printer, Part 1

We’re testing the new Creality Hi Combo multicolor 3D printer. This is part one of a four-part series, please read parts two, three and four. Creality Hi Combo Background Shenzhen Creality 3D Technology Co., Ltd., better known as Creality, is one of the leading brands of desktop 3D printers, established in 2014. Creality is known… Continue reading Hands on with the Creality Hi 3D Printer, Part 1

Chicago Additive’s AMOS High-Speed Desktop 3D Printers After Naval Collaboration

I’m reading about a new line of desktop 3D printers from Chicago Additive, AMOS.

Possible Leak Suggests New Bambu Lab 3D Printer With Larger Build Volume

It’s time to look at yet another possible 3D printer leak.

UltiMaker Launches S6 3D Printer With 4X Faster Print Speeds

UltiMaker announced a brand-new 3D printer, the S6.

Why There’s No One-Size-Fits-All Design for Desktop 3D Printers

What should a desktop 3D printer look like?

Flashforge To Expand Professional 3D Printer Line With Actively Heated Guider 4 Pro

Flashforge continues to refine its 3D printer product line with the upcoming Guider 4 series.

M.A.T. 3D Printer by 3DCeram Offers Multi-Toolhead System for Metal, Ceramic, and Paste Extrusion

I saw a desktop 3D printer that is designed to print both metal and ceramic materials.

AMT’s PostPro SFX Targets Desktop SLS Market With Affordable Post-Processing Solution

AMT’s latest product is a lot smaller.

Phrozen Prepares 16K Upgrade Kit for Sonic Mighty Revo Resin 3D Printer

Phrozen is offering a unique upgrade to one of their popular 3D printers.

Elegoo Previews Jupiter 2: High-Resolution Resin 3D Printer with Innovative Features

We had a peek at a new 3D printer from Elegoo, the Jupiter 2.

Tethon3D Introduces Low Cost Coyote Printer, Expanding Access to Ceramic 3D Printing

Tethon3D has introduced a new, low-cost ceramic resin 3D printer, the Coyote.

Hands on with the Anycubic Kobra S1 Combo, Part 3

Our review of the Anycubic Kobra S1 Combo 3D printer concludes with Software, Print Results and Final Thoughts.

Hands on with the Anycubic Kobra S1 Combo, Part 2

Our review of the Anycubic Kobra S1 Combo 3D printer continues with a look at Operations.

Hands on with the Anycubic Kobra S1 Combo, Part 1

We were quite excited to test the new Kobra S1 Combo from Anycubic, and we had quite an adventure, as you will see.

Foldable 3D Printer Concept by Anycubic Wins iF Design Award

This has to be one of the strangest things I’ve seen in 3D printing: a foldable 3D printer design.

Could Maintenance-Free Filters be the Future for Desktop 3D Printers?

I’m reading about a new method of filtering ultrafine particles from the air.

Sovol Zero 3D Printer Unveiled with High-Speed CoreXY System and Advanced Auto-Leveling

Sovol announced a new desktop 3D printer, the Sovol Zero.

New LulzBot TAZ 8 Features Plate Cooling, Dual Extrusion Options, and US Manufacturing

LulzBot announced a new 3D printer this week: the TAZ 8, and it has one very unique feature.

Bambu Lab Unveils H2D: A High-Precision Hybrid Maker Device Combining 3D Printing, Laser Cutting, and More

The H2D is here! What is this highly unusual device all about?

Is Bambu Lab’s H2D Linked to the Stratasys Patent Lawsuit?

Could there be a relationship between Bambu Lab’s new 3D printer and the Stratasys lawsuit?

Creality Unveils Hi Combo: A High-Speed 3D Printer with Automated Filament Switching

Creality launched the anticipated Creality Hi Combo 3D printer today.

Creality Shifts HALOT Resin 3D Printer Line to PioCreat in Strategic Move

There’s been a significant development with Creality’s line of resin 3D printers.

Desktop 3D Printer Prices Plummet: A Look at the Latest Market Trends

After the price shakeup last week, I thought it was time to review the current pricing of desktop FFF 3D printers to see what’s going on.

The Desktop 3D Printing Market is Splitting Between Consumers and Enthusiasts

There’s a way for desktop 3D printer operators to determine their place in the coming consumer shift.

Prusa Research Introduces EasyPrint: Mobile-Friendly 3D Print Slicing

Prusa Research introduced a new consumer-friendly feature called “EasyPrint” that marks a significant step for the company.

Piocreat Hints at New Pelletizer for 3D Printing Waste Recycling

It seems that Piocreat is about to release a “pelletizer”.

Elegoo Massively Disrupts 3D Printing Market with Centauri Carbon Price

Elegoo has finally released the price of their new Centauri Carbon 3D printer, and it is, well, astonishing.

Hands On With The Elegoo Centauri Carbon 3D Printer, Part 3

Our look at the Elegoo Centauri Carbon desktop 3D printer concludes with print results and final thoughts.

Hands On With The Elegoo Centauri Carbon 3D Printer, Part 2

Our look at the Elegoo Centauri Carbon desktop 3D printer continues with setup, calibration, operations and software.

Hands On With The Elegoo Centauri Carbon 3D Printer, Part 1

We’re testing the brand-new Elegoo Centauri Carbon desktop 3D printer.

How Fast Can 3D Printing Really Get?

How fast can a 3D printer be?

Hands On With The Anycubic Photon Mono M7 Max 3D Printer, Part 3

We conclude our test of the Anycubic Photon Mono M7 Max resin 3D printer with a look at software, print results and final thoughts.

Hands On With The Anycubic Photon Mono M7 Max 3D Printer, Part 2

Our look at the Anycubic Photon Mono M7 Max resin 3D printer continues with setup, calibration, and operations.

Hands On With The Anycubic Photon Mono M7 Max 3D Printer, Part 1

We had the opportunity to test the brand new Anycubic Photon Mono M7 Max resin 3D printer.

Industrial 3D Printer Sales Drop 24% in Q3 2024, While Desktop Segment Grows

An analyst report paints a dismal picture for 3D printing in 24Q3.

Community Backlash Could Accelerate Bambu Lab’s Shift to Consumer-Centric 3D Printing

Community reaction to the Bambu Lab controversy may inadvertently result in the situation they fear most.

Posts pagination

Newer posts Page 1 Page 2 … Page 5 Older posts
  • About
  • Contact
  • Privacy
  • Archive

We are a participant in affiliate advertising programs designed to provide a means for us to earn fees by linking to affiliated site.

. .

© Copyright Terran Data Corporation 2026

We use cookies and other techniques to give you the best experience on our website. You can find out more here.