Skip to content
Fabbaloo

Fabbaloo

  • About Us
  • News Sections
    • Corporate
    • Usage
    • Design
    • Event
    • Hardware
    • Ideas
    • Service
    • Software
  • Subscribe
  • Advertise
  • 3D Printing FAQs
    • How Does 3D Printing Work
    • 3D Printing Tips
    • How To Make 3D Printer More Accurate
  • Contact

inexpensive

Desktop Metal’s Radical Technology Collision: The S-Max Flex

Desktop Metal announced a very unusual 3D printer: the S-Max Flex.

Hands On With The Anycubic Photon M3 3D Printer, Part 2

Our hands on test of the Anycubic Photon M3 3D printer continues, with a lot at operations, software and final thoughts.

Hands On With The Anycubic Photon M3 3D Printer, Part 1

Somehow we’ve also managed to test yet another device this week, the Anycubic Photon M3 desktop resin 3D printer.

Tupel 3D Adds Powerful, Low Cost Dental 3D Scanner

Tupel 3D added a dental 3D scanner to their Kickstarter offering.

Low Cost Ceramic 3D Printing Method Developed

Researchers have developed a method of inexpensively 3D printing fully solid ceramic structures with complex geometries using FFF technology.

The Tupel 3D Scanner Will Break Financial Barriers

The Tupel 3D Scanner Will Break Financial Barriers

A new tabletop 3D scanner is about to provide outstanding scanning performance at a very low price.

miSHERLOCK: A 3D Printed SARS-CoV-2 Tester

miSHERLOCK: A 3D Printed SARS-CoV-2 Tester

Researchers at Harvard and MIT have developed a 3D printed test device to detect the virus that causes COVID-19.

Xact Metal Makes Copper 3D Printing Inexpensive

Xact Metal Makes Copper 3D Printing Inexpensive

Xact Metal has adapted their inexpensive metal 3D printer technology to enable the use of copper material.

iFactory Launches Low-Cost Belt 3D Printer

iFactory3D Launches Low-Cost Belt 3D Printer

German startup iFactory has now launched their inexpensive belt 3D printer on Kickstarter.

Low Cost Independent Extruders: The JGMaker Artist-D Launches

Low-Cost Independent Extruders: The JGMaker Artist-D Launches

The new JGMaker Artist-D desktop 3D printer launches this week, and it is quite a bit different from other low-cost 3D printers.

Published September 17, 2020
Categorized as printer Tagged #sponsored, desktop, dual, dual extrusion, fff, independent, inexpensive, jgmaker, kickstarter
Yes, There’s Another Microwave-Based 3D Printing Process

Yes, There’s Another Microwave-Based 3D Printing Process

When I saw 3DSLA.RU’s unusual microwave-based 3D printer last November at Formnext, I thought it was the only one. I was wrong.

Published August 9, 2020
Categorized as research Tagged inexpensive, metal, microwave, printer

Essentium Introduces High Speed, Low Cost Engineering Materials

Essentium announced a pair of new materials for their high speed 3D printer, and there’s an interesting story behind the move.

Published February 28, 2020
Categorized as materials Tagged _temp, abs, essentium, high speed, inexpensive, ultem

Cost Effective 3D Printing Opens Doors For Research

Researchers are now able to procure incredibly powerful 3D printing equipment at lower costs to enable work that was previously impossible.

Published February 18, 2020
Categorized as Ideas Tagged chemical, high temperature, inexpensive, research, roboze

Lumi Industries Working On High-Rez Micro 3D Printer

We’ve been tipped that Italy-based Lumi Industries is developing a very high resolution, but tiny, resin 3D printer they call the PicoFAB. 

Published February 10, 2020
Categorized as printer Tagged inexpensive, lumi, lumi industries, resin, small

The Race To The Bottom: Effects On 3D Printing

With the availability of a functional desktop 3D printer for only US$89, we had some thoughts on what this means and what happens next.

Published January 7, 2020
Categorized as Ideas Tagged cheap, growth, inexpensive, introduction, printer

Xact Metal Tunes Up Their Metal 3D Printing Tech

Xact Metal has incorporated several new features into their line of metal 3D printers that should speed up the system significantly, yet keep the price quite low.

Published December 17, 2019
Categorized as printer Tagged inexpensive, laser, metal, recoater, speed, xact metal

Belgian Startup Develops Inexpensive Metal 3D Printing Process

A new revolutionary metal 3D printing process has been developed by a startup that could drop the price of metal 3D printing significantly. We found out how it works.

Published November 27, 2019
Categorized as printer Tagged inexpensive, liquid, liquid metal, metal, valcun

Surprise! Prusa Announces MINI 3D Printer

Prusa Research announced a brand new desktop 3D printer, the Original Prusa MINI. Its surprisingly low price will enable almost anyone to obtain a quality 3D printer.

Published October 13, 2019
Categorized as printer Tagged filament, inexpensive, mini, plastic, prusa, thermoplastics

A £99 3D Printer? Apparently So

Is a low-cost, actually functional 3D printer possible? It may be so with Makertech 3D’s new Axis 3D printer, which sports many features normally found on higher-priced gear.

Published September 14, 2019
Categorized as printer Tagged axis, diy, inexpensive, kit, low cost, makertech 3d, plastic

The Inexpensive Phiz Tabletop 3D Scanner

Looking for an inexpensive tabletop 3D scanner? The upcoming Phiz 3D scanner from KIRI Innovation could be for you.

Published September 4, 2019
Categorized as Hardware Tagged inexpensive, kiri innovation, laser, phiz, scanner, tabletop

SPEE3D Refines Their Metal 3D Printing Process

Australia-based SPEE3D has refined their supersonic 3D printing process.

Published December 26, 2018
Categorized as printer Tagged aluminum, copper, inexpensive, metal, spee3d, speed

The Least Expensive 3D Printer Ever? The PlyBot Desktop 3D Printer is Coming

We ran into a new inexpensive 3D printer that supposedly will be launched later this year, the PlyBot.

Published March 19, 2018
Categorized as printer Tagged inexpensive, plastic

SparkMaker: An Inexpensive LCD-Based Resin 3D Printer

The Sparkmaker 3D printer is currently listed on Kickstarter and appears quite popular. Let’s find out why. 

Published August 4, 2017
Categorized as printer Tagged inexpensive, resin

Could the BuildOne USD$99 3D Printer Be Different?

Another ultra-low cost desktop 3D printer has been launched on Kickstarter: BuildOne. 

Published May 25, 2017
Categorized as printer Tagged inexpensive, plastic

A USD$49 3D Printer? Can It Be True?

China-USA based Kodama is set to release a USD$49 desktop 3D printer, and I may be a bit skeptical of this project. 

Published May 18, 2017
Categorized as printer Tagged inexpensive, plastic
  • About
  • Contact
  • Privacy
  • Archive

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

© Copyright Terran Data Corporation 2022

We use cookies and other techniques to give you the best experience on our website. You can find out more here.