We had a chance to talk with Robo CEO and founder Braydon Moreno recently to find out the latest on this interesting desktop 3D printer manufacturing company.
All
Sculpteo un-Betaâs Their Smoothing System
3D print service Sculpteo announced testing of their mysterious smoothing system is now âout of its beta phaseâ and available to all.
Design of the Week: RYST
This weekâs selection is the fascinating RYST wearable iPhone stand by designer Cal Craven.
Can Automobiles Be Made More Efficient With 3D Printing: Yes and No
A report from the University of Nottingham proposes ways to make automobiles more fuel efficient through the application of 3D metal printing.
Anyone Can CAD Online With CAD.ai
A startup company provides a set of CAD APIs that can be embedded on any website.
Making Your Own PEEK Filament
Iâm looking at the results of an experiment done by 3devo to extrude PEEK plastic into usable 3D printer filament.
From Prototyping to Manufacturing: What’s 3D Printing Used For?
Though we may strive for the day in which it’s possible to make an entire aircraft with 3D printing, according to Wohlers Associates, about one-third of the reported additive manufacturing (AM) applications is for creating prototypes and visual models.
One on One With Formlabsâ Max Lobovsky, Part 2
Fabbaloo had a chance to sit down with Formlabsâ founder and CEO Max Lobovsky and find out whatâs happening at Formlabs.
Controversial NexD1 Project Suspended by Kickstarter
To the surprise of few, the highly controversial NexD1 desktop 3D printer project was suspended permanently by Kickstarter last night.
3ntr Pushes the Envelope on Filament 3D Printing
We examined samples from 3ntrâs equipment and found them very capable.
Adobe Pushes Deeper Into 3D and UX Design
Right out of the gate for 2017, Adobe is offering a pair of applications featured at the Adobe MAX 2016 conference
One on One With Formlabsâ Max Lobovsky, Part 1
Fabbaloo had a chance to sit down with Formlabsâ founder and CEO Max Lobovsky and find out whatâs happening at Formlabs.
EOSâs Strong Focus on Industrial Operations
EOS is well known as one of the few true industrial 3D printer manufacturers around, and we examined some of their latest upgrades.
3D Printing at a Disadvantage for Retail Thrills
Iâm watching a video showing how retailers are using a variety of technologies to attract shoppers to their establishments.
Stefani Pellinen-Chavez â âIt Helps if You Try to Look at How You Can Bring Value and Prove to Others, but More Importantly to Yourself, That You Have What It Takesâ
Stefani Pellinen-Chavez is a co-founder and the Chief Operations Officer of Ivaldi Group.
B9Creationsâs Core Series 3D Printers
The new B9Creation Core Series provides several interesting advantages.
The Filament Roller: A Flexible Solution to Dastardly 3D Printing Problems
Today Iâm looking at something called, âThe Filament Rollerâ that just launched on Kickstarter.
StilNest Enlarges?
A 3D print retail operation intends on hiring quite a few new staff, suggesting theyâve been very successful.
Leapfrog Has an Important Point
Leapfrog 3D Printers has introduced a minor, but important feature: auto power down.
Support Structures Eliminated with this 3D Printing Concept?
Swiss students have invented a new twist on 3D printing without support material.
Controversy Erupts Over the NexD1 3D Printer Campaign
Multiple readers have contacted us asking for advice on the now-controversial launch of the NexD1 jetting 3D printer.
Design of the Week: $30 3D Scanner
This weekâs selection is the interesting #30 3D Scanner 3D model by UK-based designer Dave Clarke.
KĂŒhling&KĂŒhlingâs Two Powerful 3D Printers
Germany-based KĂŒhling&KĂŒhling now offer two very powerful 3D printers suitable for professional use.
3D Printed Filtration Systems: Possible Or Not?
Thereâs some interesting research on the ability of 3D printing technologies and their ability to produce unusual membranes.
Reading Between the Lines of 3D Hubsâ Latest Trends Report
I found it interesting to see some long term patterns appearing in 3D Hubsâ monthly trends report.
MakePrintable Launches!
Cloud-based 3D model repair service MakePrintable launched version 1.0 today.
Sisma Broadens 3D Printer Portfolio with Bigger Metal and SLA
Compared to plastic 3D printing technology, metal additive manufacturing (AM) is relatively young.
Unizâs Sideways 3D Printer
Sometimes companies come up with a new angle on 3D printing. Now Uniz has literally developed a 90 degree angle on their new prototype.
A 3D Print Newbie Tries Out MakerBotâs Replicator+
When I was asked if I would mind reviewing a 3D printer from a new user perspective, tt took me all of a few seconds to agree to the testing and then counted down the days for the printer to arrive.
Just Because That 3D Printer Company Stock is Rising Doesnât Mean Theyâre Successful
Youâd think that the stock price of a company indicates its success, but thatâs not always the case.
Onshape In-Context Assembly Design is Unlike Anything Youâve Ever Seen
Throughout all the years (decades? yeow!) Iâve use 3D modeling software, I canât think of a time where I didnât use some type of in-context assembly design.
Things Looking Good For Prusa Research
After the âconsumer crashâ of desktop 3D printing there remains the surviving companies. One thatâs far beyond mere âsurvivingâ is Prusa Research.
Thereâs Still Time To Enter The Additive World Design Challenge
Every year a significant design contest takes place in Eindhoven
Executive Shifts at MakerBot are a Huge Signal of Their Intentions
MakerBot CEO Jonathan Jaglom is now the former CEO of MakerBot Industries.
The Strange âNixâŠâ Color 3D Printer
Iâm looking at a recent Kickstarter launch for a machine billed as âThe World First High Resolution Full Color 3D Printerâ.
Susan Taing â âAs Focused as You Think You Are Now, You Can Be Even More Focused.â
Susan founded and led Bhold to strong recognition from both the maker and design communities
If MCOR Was Not Exhibiting At CES, Why Were They There?
This yearâs CES exhibition in Las Vegas was notable in the 3D space primarily by the missing presence of several large industrial vendors. Except one, sort of.
MakerBotâs Interesting 2-For-1 Deal May Indicate Changes
This week I received an interesting deal offer from MakerBot: Buy two machines and get one free. But is there more to the story?
Questionable Ratings Plague Amazon 3D Printer Listings
Shopping for a 3D printer on Amazon? Watch out for twisted product ratings.
3D Printed Hand Replicas â A New Security Concern
Digital technology gives us more capabilities and even lets us have a lot of fun.
Something Very Interesting is Going On at Something 3D
The curiously-named Something 3D company has figured out a way to actually 3D print color objects with a filament extruder.
Whatâs Behind Sculpteoâs AI Venture?
Last week 3D print service Sculpteo announced a series of AI-based tools to simplify use of their system. But whatâs driving them to this?
Design of the Week: Assembled Catapult
This weekâs selection is the well-designed âAssembled printed catapult without supportâ by France-based Genapart.
3D Printed Weapons to be Produced by US Department of Defense
A very curious solicitation from the US DOD requests âexplosiveâ 3D printer materials.
Unusual 3D Metal Printing Services by Smit Röntgen
If you want 3D printed metal parts, you buy or use a 3D metal printer, correct? Not always, it turns out.
âThere Doesn’t Seem to Be Anything Interesting in 3D These Daysâ
The title of this story is an actual quote I heard during last weekâs CES exhibition. And it sucks.
The MoonRay S High Resolution Desktop 3D Printer
We had a look at the new MoonRay S desktop 3D printer from SprintRay.
Dremel and 3DPrinterOS Partner for 3D Printing in the Cloud
After creating a cloud-based operating system for 3D printer networks, 3DPrinterOS went on to launch ZAP in September of last year.
Titan Roboticsâ Multi-Headed Escher
Titan Robotics has constructed one of the most unusual 3D printers Iâve yet seen.
Pro and Semi-Pro Desktop 3D Printers from MeccatroniCore
Italy-based MeccatroniCore offers a small line of impressive desktop 3D printer units suitable for professional use.
HoloLens App Shows How 3D Modeling Works for Augmented/Mixed Reality
Little by little augmented/mixed reality (AR/MR) is slipping past the surly bonds of consumption with more and more imagining, nay DEMONSTRATING, what 3D design could be like using devices that are, at least, sure to give us chuckles at the possibilities and, at most, completely take over our every waking hour.
CEL Introduces Remote Control Options and a Tree
CEL makes some of the most interesting desktop 3D printers you can find, but now theyâre even more interesting with a curious set of announcements today.
Ability 3Dâs Low Cost 3D Metal Printing Option
We had a chance to talk to Ben Willard, the âguy in the garageâ behind Ability 3D, a 3D metal printer.
Irene Presti â â3D Printing Has a Lot of Potential but Still Lacks Research, Professionalization, and Trainingâ
Irene Presti is the woman behind almost all of the current Latin Americaâs initiatives in 3D Printing.
CoLiDoâs 3D Metal Printer is On The Way
It seems there are an increasing number of 3D metal printer options recently, and thereâs one more from CoLiDo.
Timing is Everything in 3D Printer Kickstarters
After observing a number of 3D printer crowdfunding fails, there seems to be an effect you should be aware of.
What Does âCoreXYâ Mean?
When reviewing the specs for 3D printers, you might encounter the term âCoreXYâ. What is a âCoreXYâ system?
Markforgedâs New 3D Metal Printer: The Metal X
Markforgedâs previous 3D printing equipment focused on high-strength materials like nylon, kevlar and carbon fiber, but now theyâre into metal, too.
Float Your 3D Printed #3DBenchy
The ever popular #3DBenchy benchmarking object has received a slight upgrade.
Essentium Develops Revolutionary 3D Printing Process
Itâs been a long time since Iâve seen something this revolutionary: Essentium has created a completely new filament-based 3D printing process.
Design of the Week: Chevy Camaro LS3 V8 Engine
This weekâs selection is the incredible Chevy Camaro LS3 V8 Engine by mechanical engineer Eric Harrell.
Magentic Bioprinting Experiment – In Orbit
Russian researchers are preparing a very unusual 3D printing experiment for use on the International Space Station.
Could the Worldâs Most Heat Resistant Material Be 3D Printed?
Researchers at Imperial College London have identified incredible materials that can withstand temperatures up to 4,000C, but would it be possible to 3D print this stuff?
Monoprice to Launch The Kickstarter Killer, and Other Things
Monoprice has become very well known for their low-cost 3D printer options, but things are about to change significantly.
An Open Source High Resolution Resin 3D Printer
The RooBee One is a relatively easy to build completely open source high resolution resin-based 3D printer.
German RepRapâs Equipment Doesnât Look Like a RepRap
When the term âRepRapâ is used, you might think of an inexpensive hobby-style desktop 3D printer. But thatâs not at all what is being produced by German RepRap.
Precision Health Care Driven by 3D Systemsâ Medical 3D Printing
In a world of exploding smartphones, fictional augmented reality (AR) glasses and government spying, one might wonder whether or not new technology really advances the human predicament or if it just allows a few executives to score some extra dough here and there.
Aleph Objects Announces the MOARstruder
Officially, itâs known as the âLulzBot TAZ MOARstruder Tool Headâ, but in fact itâs a monster extruder.
Minifactoryâs 3D Printer Have Become Much More Sophisticated
MiniFactoryâs latest 3D printer is quite different than when we first saw them some three years ago.
A Monstrous Implication from the Introduction of Production 3D Printers
Iâve been doing some thinking about what happens to the world when âproductionâ 3D printers become widespread.
Sculpteo Announces AI-Based 3D Printing Services
Sculpteo announced today a suite of AI-based elements to assist in 3D metal printing.
The Good, Bad and Ugly of Using Rafts When 3D Printing
One of the first things you may encounter when beginning 3D printing is rafts. But are they a good thing or bad?
Nyomoâs âMinnyâ 3D Printer
Looking for a small, yet powerful professional high-resolution desktop 3D printer? Look no further than the Nyomo âMinnyâ.
The Biggest Crime in 3D Printing
Thereâs always speculation about how crime can take place by leveraging technical aspects of 3D printing, but I believe the most crimes are of a more simple nature.
Charlene Flick â âBeing a Woman Working in 3d Printing Does Not Go Unnoticed.â
This article originates from Women In 3D Printing and is part of our effort to support the use of 3D printing technology by women. The article is re-published with permission. Attorney, entrepreneur, expert in Intellectual Property, consultant, Special Advisor under President Clintonâs AdministrationâŠCharlene Flick surely wears a lot of hats! And she accepted to share with… Continue reading Charlene Flick â âBeing a Woman Working in 3d Printing Does Not Go Unnoticed.â
PostProcessâs Solutions for Post Processing 3D Prints
If thereâs one dirty secret of 3D printing, itâs the post-printing experience.
A 3D Jewelry Design System for the Public
Iâm looking at another interesting attempt to leverage 3D printing for public use by JulBox.
A-Team Venturesâ Desktop 3D Printer has a Waggle!
A-Team Ventures has produced desktop 3D printers for some years, but now they have a Waggle, too.
Going to CES in Las Vegas? Catch Up With Us
This week is CES week, where the world shows off their new products, including, it turns out, many 3D printers.
The Sad Story of NEA 3D
Another desktop 3D printer startup continues to evaporate away, leaving some customers without funds.
Design of the Week: 3D Printable Sound Absorbers
This weekâs selection is the practical 3D printable sound absorbers by designer Julien Dorra.
Six 3D Printing Things To Watch For in 2017
Yes, itâs the beginning of a new year and I had some thoughts on what might happen.
Focusing on Our Top 3D Print Stories in 2016
At the end of the year, we like to review our progress.
Why Is 3D Metal Printing So Challenging?
Those familiar with polymer 3D printing will recall the challenges of successful printing, but thatâs nothing compared to the requirements of 3D metal printing.
How 3D Printing Revolutionized the Worldâs Oldest Making Process
A wonderful story has been submitted to our publication describing how a traditional ceramics craftsman was able to vastly simplify his work using 3D print technology
Fabbaloo’s Annual Survey Still Needs Your Input
Our annual reader survey is STILL going and we need your input today!
New Fast âProgrammable Toolingâ Tech Rivals Continuous DLP 3D Printing
When I last spoke to Graham Bredemeyer over a year ago, he told me that he was developing a unique 3D printer platform in his own apartment in Chattanooga, Tennessee.
In The Future, There Will Be Two Kinds of 3D Printers
Iâve been doing some thinking about the âIndustry 4.0â concept and believe it may drive the style of future 3D printers.
EVO-tech Can 3D Print Real Metal Objects with Filament!
Hidden in the back of EVO-techâs booth at FormNext was a very significant spool of material.
A Time For 3D Printing Partnerships
In the past several years multiple 3D print companies have emerged and grown, but now they should consider partnering to grow further.
Maix to Launch in January
A secretive project to enable consumers to âdesignâ their own products is set to launch in a few weeks.
Designer Kirby Downey Bring Doomâs BFG to Life
Doom is arguably the quintessential first-person shooter that spawned one of the most popular video game genres of all time.
The Promise of Xjetâs Unusual 3D Printing Process
Xjet is a very interesting Israeli company developing a truly unique 3D printing process that differs from any other.
3D Printing: The Key to the Solar System
A new paper from NASA proposes how to leverage 3D printing and robotics technologies to literally take over the solar system.
My Ongoing Struggles With The Idea of 3D Food Printing
Iâm reading a story about consumer 3D food printing possibilities on Phys.org and am struggling with the concept.