Our test of the Kobra Go desktop 3D printer continues with a look at Setup, calibration and operations.
fff
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 1
Just prior to its release, we obtained a Kobra Go 3D printer from Anycubic and gave it a good test.
The SunLu Terminator3 3D Printer
Sunlu announced a new desktop 3D printer that could be among the fastest in its class.
Two New 3D Print Safety Reports You Must Read
Researchers from Chemical Insights and Prusa Research have published reports on 3D printer safety that should be standard reading for all participants.
Hands On With The Sovol SV01 PRO 3D Printer, Part 3
Our testing of the Sovol SV01 Pro 3D printer concludes with a look at print quality and final thoughts.
Hands On With The Sovol SV01 PRO 3D Printer, Part 2
Our testing of the Sovol SV01 Pro 3D printer continues with a look at operations.
Hands On With The Sovol SV01 PRO 3D Printer, Part 1
The Sovol SV01 Pro 3D printer spent some time in our lab being tested.
Anycubic Announces 3D Printer Under $200, and More
Anycubic announced two new 3D printers, including one that is to be priced at under US$200.
Automatically Correcting 3D Printer Errors On The Fly
Have you ever hoped your 3D printer would automatically correct errors as it prints? That seems to now be possible.
Creality Announces New, Upgraded Ender-3 Series, and Much More
Creality released a sweeping set of announcements that describe multiple new 3D printers and accessories.
Thoughts on the Incredibly Powerful New MF3 Extrusion System
Researchers have developed a unique and very powerful FFF extrusion technology they call “MF3”.
The Snapmaker Artisan 3-in-1 3D Printer
Snapmaker announced a new 3-in-1 desktop 3D printer, the Artisan.
The Fifth-Gen ICARUS 3D Printer
Filament Innovations’ flagship 3D printer is the huge ICARUS generation 5 device.
Flashforge Moving Into Professional 3D Printers
Flashforge has introduced a new 3D printer that’s way out of their normal scope.
Hands on with the MINGDA Magician X 3D Printer, Part 3
Our test of the MINGDA Magician X desktop 3D printer finishes with a look at software, print quality and final thoughts.
Hands on with the MINGDA Magician X 3D Printer, Part 2
Our look at the MINGDA Magician X desktop 3D printer continues with setup, calibration and operation.
Hands on with the MINGDA Magician X 3D Printer, Part 1
Our lab has been busy exploring the MINGDA Magician X desktop 3D printer.
The Geeetech Mizar S 3D Printer
The Geeetech Mizar S has some unusual features for a low-cost desktop 3D printer.
Creality’s New, Large Ender-3 S1 Plus
Creality announced another entry into their Ender-3 S1 series, the Ender-3 S1 Plus.
Combining SLA and FFF Processes: Resin Extrusion 3D Printer Developed
The folks at Proper Printing YouTube channel decided to combine FFF and SLA 3D printing processes, with interesting results.
Could This Be The Best 3D Printer Nozzle Ever?
A new nozzle for FFF 3D printers has been announced by fibtip, and it seems to have all the right characteristics.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 3
Our review of the Anycubic Kobra Plus concludes with a look at software, print quality and final thoughts.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 2
Our look at the Anycubic Kobra Plus 3D printer continues with setup, calibration and operation.
Hands On With The Anycubic Kobra Plus 3D Printer, Part 1
Anycubic’s Kobra line has a new member, the Kobra Plus.
The Anycubic Kobra Plus 3D Printer
Anycubic announced a new entry into their Kobra desktop 3D printer series, the Kobra Plus.
Gearbox HT2: How To Properly 3D Print High Temperature Materials
I came across a high temperature 3D printer with a big difference.
Hands On With The Creality Ender-3 S1, Part 3
Our look at the Creality Ender-3 S1 desktop 3D printer ends with a look at software and final thoughts.
Hands On With The Creality Ender-3 S1, Part 2
Our look at the Creality Ender-3 S1 desktop 3D printer continues with setup, calibration and operations.
Hands On With The Creality Ender-3 S1, Part 1
We’ve been testing the Creality Ender-3 S1 desktop 3D printer.
The Creality Ender-3 S1 Pro
The long line of Ender-3 3D printers from Creality has a new flagship model, the Ender-3 S1 Pro.
Could Bambu Lab’s X1 Series Be The Smartest 3D Printer?
Bambu Lab launched a new 3D printer series, the X1, designed for the prosumer market, and it has many features we’ve never seen before.
gCreate Announces New gMax 2 PRO 3D Printer
Brooklyn-based gCreate announced a new professional 3D printer, the gMax 2 PRO.
Creality’s CR-10 Smart-Pro 3D Printer
Creality’s latest entry in their popular CR series is the CR-10 Smart-Pro.
More Questions About The Anker M5 3D Printer
More questions arise about the new Anker M5 3D printer, even before it ships.
Predicting Perfect FFF Extrusions
Researchers have developed a mathematical model to predict extrusion widths to improve 3D print quality.
A Look At The FDM Assessment Protocol
Somehow I hadn’t seen the FDM Assessment Protocol for quite a while, but maybe you haven’t either.
Anker Launches Desktop 3D Printer, But We Have Questions
Anker launched their first 3D printer, the M5, on Kickstarter.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 2
Our hands on review of the Anycubic Kobra desktop 3D printer continues with a look at operations, print results and conclusions.
Hands On with the Anycubic Kobra Desktop 3D Printer, Part 1
Our busy lab managed to give the Anycubic Kobra desktop 3D printer a thorough workout.
Anycubic Releases Kobra, Anycubic M3 3D Printer Series and More on the Photon Nex
Anycubic today released two new series of desktop 3D printers, the Kobra and Anycubic Photon M3 series.
Hands On With The Creality Sermoon V1 Pro 3D Printer, Part 2
Our testing of the Creality Sermoon V1 Pro desktop 3D printer continues, with a look at operations, advanced materials and remote management.
Hands On With The Creality Sermoon V1 Pro 3D Printer, Part 1
Our lab has been very busy lately, this time testing the Creality Sermoon V1 Pro desktop 3D printer.
Anycubic To Announce FIVE New 3D Printers
Anycubic is set to release not just one, but FIVE new desktop 3D printers.
BEEVERYCREATIVE Completes Continuous Space 3D Printer Prototype
BEEVERYCREATIVE announced they have completed building the first prototype of their new space-based continuous 3D printer.
PowerBelt’s TinyBelt 3D Printer To Launch Soon
PowerBelt3D is set to release a very low-cost belt 3D printer, the TinyBelt.
Polymaker and AMESOS To Develop High-Speed FFF 3D Printing Process
This week Polymaker announced a partnership with AMESOS to developed what they call “FFF 2.0”, a high speed 3D printing process and associated 3D printer.
Eight 3D Print Companies On The Move
I follow many 3D printing companies, but there are a few on which I’m keeping a close watch.
Who Wants a Voice Controlled 3D Printer?
A new project will launch a voice controlled 3D printer.
Sindoh Makes The Change
I spoke with Sindoh and learned they’re undergoing a major transformation.
Hands On With The Voxelab Aquila S2 3D Printer, Part 2
Testing the Aquila S2 desktop 3D printer continues with an examination of print results.
Hands On With The Voxelab Aquila S2 3D Printer, Part 1
Our lab has been quite busy lately, and this time we’re reviewing the Voxelab Aquila S2 desktop 3D printer.
Essentium Adding Mystery Metal 3D Printing Capability
Essentium surprised with the announcement that they are developing a metal 3D printing system.
Creality Announces Four New 3D Printers
Creality announced not one, but four new desktop 3D printers with added intelligence and convenience.
Hands On With The Voxelab Aries 3D Printer, Part 2
Our look at the new Voxelab Aries desktop 3D printer continues with the setup and operation.
Hands On With The Voxelab Aries 3D Printer, Part 1
Our test lab has been quite busy lately. This time we reviewed the Voxelab Aries desktop 3D printer.
3DGence Announces New Line of Metal 3D Printers
3DGence announced the “ELEMENT” series of metal 3D printers to accompany their INDUSTRY thermoplastic series.
3D Printer Deals From Anycubic
Anycubic has released details of significant savings on many of their 3D printers.
BOFA Publishes Paper on 3D Print Emissions and Safety
BOFA International published a paper analyzing the issues surrounding emissions from active 3D printers.
The Incredible Infinity3D Hybrid Belt 3D Printer
I haven’t seen this before: a 3D printer that uses a moving belt — except when it doesn’t.
Creality’s New Fully Enclosed CR-200B 3D Printer
Creality’s latest 3D printer is the fully enclosed CR-200B desktop 3D printer.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 2
My testing of the Voxelab Aquila X2 desktop 3D printer continues.
Hands On With The Voxelab Aquila X2 Desktop 3D Printer, Part 1
I had a chance to assemble and test Voxelab’s new Aquila X2 desktop 3D printer.
Zaxe Releases Three New 3D Printers
Zaxe’s three new 3D printers address different markets.
ZYYZ Labs Introduces Pro II Professional 3D Printer
ZYYX Labs introduced a new 3D printer, the ZYYX Pro II.
The Wemake Automatic Ejection system For 3D Printers
I’ve come across another method for automating 3D printing: the Automatic Ejection System by Wemake.
The MakerPi P3 PRO 3D Printer is Coming
There’s a new and interesting desktop 3D printer in the MakerPi family.
Raise3D Announces Pro3 3D Printer Series
Raise3D announced a new line of professional 3D printers, the Pro3 series.
The Flashforge Adventurer 4 3D Printer: Many Features at a Low Price
Flashforge announced a new desktop 3D printer, the Adventurer 4.
Trilab’s AzteQ Delta 3D Printer Surprises With Many Unusual Features
Trilab has launched AzteQ, a powerful new family of delta 3D printers.
The LulzBot TAZ SideKick 3D Printer is Now Available
FAME 3D released a new desktop 3D printer, the LulzBot TAZ SideKick.
How Creality Achieved High-Speed FFF 3D Printing
Creality’s new Ender 7 breaks speed barriers with some interesting technological improvements.
The Creality CR-10 Smart 3D Printer
Creality’s new CR-10 Smart desktop 3D printer builds on a long history of 3D printing.
Hands On With The Anycubic Vyper 3D Printer, Part 3
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: print results.
Hands On With The Anycubic Vyper 3D Printer, Part 2
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: setup and printing.
Hands On With The Anycubic Vyper 3D Printer, Part 1
I had the opportunity to test out the new Vyper 3D printer from Anycubic in our lab: features and unpacking.
What’s In An Ultra-Low Cost 3D Printer These Days?
Today’s ultra-low cost 3D printers are a far cry from their predecessors.
ZMorph’s New i500 3D Printer
ZMorph announced a new industrial 3D printer, the i500.
Hints Of A New LulzBot Desktop 3D Printer
A mysterious video trailer suggests a new, inexpensive LulzBot 3D printer could be soon on the market.
A 3D Printer Manufacturer You May Not Know: MINGDA
I encountered a 3D printer manufacturer I hadn’t heard from before, MINGDA.
3DGence Announces The INDUSTRY F350
3DGence announced a new industrial 3D print for their INDUSTRY line, the F350.
Question of the Week: 3D Printed Beads
This week’s question is about the possibility of 3D printing beads.
3D Systems and Jabil Announce “Roadrunner” Industrial 3D Printing System
3D Systems announced a new industrial 3D printing system designed for the aerospace and automotive industries, the Roadrunner.
The Dog Bone Problem: How The Virtual Foundry 3D Prints Metal
I spoke with The Virtual Foundry to find out more about their unusual metal 3D printing approach.
Book of the Week: Designing 3D Printers
This week’s selection is “Designing 3D Printers” by Neil Rosenberg.
Low-Cost Independent Extruders: The JGMaker Artist-D Launches
The new JGMaker Artist-D desktop 3D printer launches this week, and it is quite a bit different from other low-cost 3D printers.
Cultivate3D Launches Massive “Elevator” 3D Printer
Australia-based Cultivate3D launched a massive new 3D printer that includes several very unusual features.
China Conducts 3D Printing Experiment In Orbit (Or Do They?)
The US may no longer the sole 3D printer operator in space, as China has demonstrated what appears to be a functioning 3D printer on their most recent mission.
1.75 vs 2.85mm Filament Showdown
Where did the two 3D printer filament diameters come from and what is the difference? Which one is better?
Creality’s New CR-6 SE 3D Printer Sports Several Unusual Features
Next week Creality launches their latest desktop 3D printer, the CR-6 SE, on Kickstarter and the device includes some amazing new features we’ve never seen previously.
A $59 3D Printer?
The 3DFORT is an ultra-low-cost desktop 3D printer on Kickstarter. We have some thoughts on this development.
An Unusual 3D Printer Design From Formon
The Formon Core desktop 3D printer includes one of the most unusual motion systems I’ve yet seen.
PSA: It’s FFF, Not FDM (Mostly)
Do you know the difference between the terms “FDM” and “FFF”? From what I read, it seems a large number of people are not aware of their true meaning.
TPU Parts With SLS Printing
How useful is TPU when 3D printing? What are the best 3D printing processes for printing flexible TPU parts?
Is it FDM or FFF?
It’s long overdue, but I want to talk about FDM and FFF today.
Post-Processing In Focus: Support Removal
Post-processing is evolving from 3D printing’s dirty little secret to a PR headline.