Ultimaker now seeks to hire an official Director of Sales & Business Development for USA operations.
Results for "ultimaker"
Jeremy Clarkson Hired By Ultimaker
In a bold move, 3D printer manufacturer Ultimaker has engaged well known British presenter Jeremy Clarkson as their new 3D printing spokesperson.
Print Tall With Your Ultimaker, Really Tall!
A project intends on providing an accessory for Ultimaker 3D printers that extends the height axis to, well, unlimited!
Ultimaker is Giving Away Two Ultimakers!
In a surprise announcement, Ultimaker has announced a contest where two people will win a brand new Ultimaker 3D printer.
Ultimakerās Trust Level: 10
We had an opportunity recently to speak with Ultimaker CEO Siert Wijnia, and discovered something very unusual.
Ultimaker Goes Big and Small With New Machines
Personal 3D printer manufacturer Ultimaker has announced not one, but two new machines. One big, one small.
Win An Ultimaker From YouMagine and Change The World
YouMagine has opened an unusual 3D printing challenge, with the prize being an Ultimaker Original.
Bhold Labs Partners with Ultimaker
Bhold has partnered with Ultimaker to enable everyone to easily participate in their 3D printed product development program.
Ultimaker Takes Over MakerBotās Position?
In 2009 the champion of DIY 3D printing was MakerBot. In 2014 there could be a different champion.
Ultimaker Upgrades Their Original 3D Printer
Ultimaker announced the availability of a heated bed for their 3D printer. No, not for the current model, but for their previous model.
Ultimakerās CREATE Education Program
Ultimakerās UK branch, Ultimaker GB, has launched a program to bring 3D printing to schools.
Build Your Own Ultimaker?
Looking for plans to build your own 3D printer? Now you can consider building an Ultimaker 2. While itās for sale in assembled form, you can now inspect the plans for it.
Ultimaker Changes It Up – Again!
3D printer manufacturer Ultimaker has made a big change at the top, not too long after doing so once before. Theyāve got a new CEO, but heās not exactly new.
The Ultimate Ultimaker 3D Print?
While at the NYC 3D Printshow we took a close look at an incredible 3D print that you could print yourself at home.
Ultimaker 2 Unboxing
Barnacules Nerdgasm documents his Ultimaker 2 unboxing experience. If youāre at all interested in acquiring Ultimakerās latest personal 3D printer, youāll want to watch this video.
Ultimaker Reorganizes
You may have heard about Ultimaker’s new personal 3D printer, the not-so-surprisingly named Ultimaker 2, but that’s not all that’s going down at the Dutch manufacturer. We listened to a talk by their new CEO, Henk van Gils at the London 3D Printshow 2013, in which he revealed some corporate moves at the growing… Continue reading Ultimaker Reorganizes
The Ultimaker 2 3D Printer
Ultimaker has long been regarded as one of the fastest and most reliable personal 3D printers. But it’s been quite a while since it was released. Now the company has announced a new version: Ultimaker 2. The new unit is not simply more attractive with its shiny case: Every part has been redesigned… Continue reading The Ultimaker 2 3D Printer
Win an Ultimaker 3D Printer from GrabCAD
If you have ideas for new toys on your brain, consider entering GrabCAD’s new “Ultimaker 3D Printer Toy Design Challenge”. Your entry could win you a brand new, fully assembled Ultimaker personal 3D printer. In fact, GrabCAD and Ultimaker are offering no less than five Ultimakers as prizes, four of which are fully assembled.… Continue reading Win an Ultimaker 3D Printer from GrabCAD
All About Ultimaker
Jon Kalish digs deep into the history and motivation behind the development of the amazing Ultimaker 3D printer in a new Make magazine article. Ultimaker, created by Erik De Bruijn and Martijn Elserman, was an attempt to create a better 3D printer based on the RepRap model – but they soon discovered they could start… Continue reading All About Ultimaker
Ultimaker Operators Needed!
Fabbaloo was contacted by Manhattan-based radio reporter and podcast producer Jon Kalish, who enquired about our experience with the Ultimaker 3D printer. Unfortunately, we don’t have any direct contact with that particular 3D printer yet. We asked why is he so interested? Turns out that Jon is writing a piece on Ultimaker for a major zine and… Continue reading Ultimaker Operators Needed!
Ultimaker Breaks the Speed Limit
One of the annoying things about 3D printing is the length of time it takes to produce objects. Unlike a printed 2D page, which is created in a single sweep of the inkjet, 3D objects have many layers that sometimes take hours to print. Clearly, a way of speeding things up would be desirable. … Continue reading Ultimaker Breaks the Speed Limit
Another Hobby 3D Printer: The Ultimaker
There seems to be a sudden rash of open source, low-cost 3D printer kits lately. In addition to the usual suspects (MakerBot, RepRap, Fab@Home and the very recent UP!), we now have The Ultimaker! This prototype device is being developed at FabLab Utrecht (under the name “elserbot”) and seems to build on the experiences of… Continue reading Another Hobby 3D Printer: The Ultimaker
What You Should Pay for a 1kg Spool of 3D Printer Filament?
What should a spool of 3D printer filament cost? I took a look into this question.
What are the Most Popular 3D Printing Technologies?
Although there are many niche additive technologies, ISO/ASTM 52900:2021 provides a basic classification for the 7 most common types of 3D printing.
Hands on with the Kingroon KP3S Pro V2, Part 2
Our test of the new Kingroon KP3S Pro V2 continues with a look at setup, calibration, operations and software.
Clearance Sales Signal the Decline of Slow-Speed 3D Printers
It begins: the disappearance of slow-speed 3D printers.
Introducing the QD330: Afinia’s Latest 3D Printer Tailored for the Education Sector
Afinia announced a new 3D printer, the QD330.
3DPrinterOS and Polymaker Forge Strategic Deal to Offer Significant Material Discounts
3DPrinterOS and Polymaker announced a very intriguing deal for materials.
Bambu Studio 1.8.2 Enables Integration of Third-Party Filaments
The update brings significant enhancements in material compatibility, user collaboration, and printing flexibility to the Bambu Lab ecosystem.
The Truth Behind ‘High Speed’ 3D Printing: A Call for Standardized Specifications
In the confusing world of high speed desktop 3D printing, which companies present the proper specifications?
Hands On With The Artillery Sidewinder X3 Pro 3D Printer, Part 3
Our look at the Artillery Sidewinder X3 Pro 3D printer concludes with results and final thoughts.
Hands On With The Artillery Sidewinder X3 Pro 3D Printer, Part 2
Our look at the Artillery Sidewinder X3 Pro 3D printer continues with a look at setup, operations and software.
LulzBot Slicing Software Revamp: From Legacy Challenges to Modern Solutions
I had an interesting conversation yesterday with the folks behind LulzBot regarding their software updates.
3MF Consortium Welcomes Altair as New Steering Member
The 3MF Consortium announced theyāve added a new Steering Member: Altair.
Hands On with the AnkerMake M5C 3D Printer, Part 3
Our review of the AnkerMake M5C concludes with a software, print results and final thoughts.
Hands On With The Method X 3D Printer, Part 4
Our look at the Method X 3D printer concludes with software, print results and final thoughts.
Hands On With The Method X 3D Printer, Part 3
Our look at the Method X 3D printer continues with more on operations.
Hands On With The Method X 3D Printer, Part 2
Our look at the Method X 3D printer continues with setup, calibration and operations.
Hands On With The Method X 3D Printer, Part 1
Weāve been testing a Method X 3D printer in our lab and itās time to tell you what we found.
Bambu Lab’s Disruptive Emergence in the 3D Printing Market
There is an interesting trend occurring in the 3D printing market recently, all caused by Bambu Lab.
The Rise of 3MF: Is It Truly the Future of 3D Printing Formats?
3MF is the 3D printing format of the future, but how widespread is its use these days?
Hands On With The Raise3D Pro3 Plus Hyper Speed 3D Printer, Part 3
Our review of the Raise3D Pro3 Plus high speed 3D printer concludes with software, print results and final thoughts.
Silicon Valley’s Open Source Shift: Implications for 3D Printing
A story about open source trends might become disturbing for the 3D print world.
Hands On With The Kingroon KLP1 High Speed 3D Printer, Part 3
Our look at the Kingroon KPL1 high speed 3D printer concludes with print results and final thoughts.
Hands On With The Kingroon KLP1 High Speed 3D Printer, Part 2
Our look at the Kingroon KPL1 high speed 3D printer continues with setup, calibration, operations and software.
Hands On With The Creality Ender-3 V3 SE, Part 3
Our review of the Creality Ender-3 V3 SE concludes with a look at software, print results and final thoughts.
Trane Technologies Integrates 3D Printing in US Federal Heat Pump Initiative
Charles R. Goulding and Preeti Sulibhavi discuss how US federal funding is fueling heat pump innovation, and how Trane, Texas A&M, and Purdue University are leading the way.
Victoria Hand Project: Providing Prosthetic Care with 3D Printing
In Ukraine the Victoria Hand Project employs 3D printing to make prosthetic care accessible to the underserved.
Introducing the M5C: AnkerMake’s Affordable High-Speed 3D Printer
Ankermake released the M5C, a variant of their popular M5 3D printer.
Beyond Hardware: The Crucial Role of Software in Micro 3D Printing
While we spend much time contemplating the hardware of 3D printing, the software is just as important.
Hands On With The Flashforge Adventurer 4 Pro, Part 3
Our hands-on review of the Flashforge Adventurer 4 Pro concludes with a look at its specialized software, print results and final thoughts.
Question of the Week: Printing Large Outdoor Sculptures
This weekās question is how one can 3D print large outdoor sculptures.
What Will the 3D Printing Industry Look Like in Ten Years?
Consolidation, innovation and the drive toward production-ready additive manufacturing could bring another order-of-magnitude change in the industry over the next decade.
Hands On With The Kingroon KP3S Pro S1, Part 2
Our review of the Kingroon KP3S Pro S1 continues with setup & calibration, operations and software.
The 3D Printer Race to the Bottom Becomes The Professional Squeeze
The race to the bottom is over, and there will be considerable movement in the 3D printer market in coming years.
Book of the Week: 3D Printer Troubleshooting Handbook
This weekās selection is ā3D Printer Troubleshooting Handbook: The Ultimate Guide to Fix all Common and Uncommon 3D Printing Issues!ā by Johannes Wild.
Hands On With The Voxelab Aquila D1 3D Printer, Part 3
Our test of the Voxelab Aquila D1 3D printer concludes with a look at print results and final thoughts.
Hands On With The Voxelab Aquila D1 3D Printer, Part 2
Our test of the Voxelab Aquila D1 3D printer continues with a look at setup, calibration, operations and software.
Optimize Your Prints: Introducing Organic Supports in PrusaSlicer 2.6
PrusaSlicer 2.6 has been released, and it includes quite a number of very useful new features.
From Polymer to Metal: Aniwaa’s Chart Reveals the Diverse World of 3D Printing
Aniwaa has produced a massively comprehensive chart of known 3D print processes and providers.
Hands On With The High Speed Anycubic Kobra 2 3D Printer, Part 3
Our test of the new high speed desktop 3D printer from Anycubic, the Kobra 2, concludes with a look at software print results, and final thoughts.
The Rise of Memberships: Monetizing 3D Model Repositories for the Future
3D model repositories seem to be shifting into a common monetization mode: memberships.
The Future of 3D Model Repositories: Shifting Markets and Potential Changes
After Prusa Research’s announcement of a Printables monetization feature earlier this week, I had some thoughts about the future of 3D model repositories.
Book of the Week: Making Your CAM Journey Easier with Fusion 360
This weekās selection is āMaking Your CAM Journey Easier with Fusion 360ā by Fabrizio Cimo.
Discovering Fused Form: Colombian Innovators in Large-Scale 3D Printing
Fused Form is a small company from Colombia that makes a large 3D printer.
Streamlining 3D Printing: The Demand for a Standardized Profile System
Could everyone please get together and figure out a way to standardize 3D printer profiles? Please!
A Mixed Bag: 3D Printer Market Landscape and Trends in 2023
3D print analyst firm CONTEXT released a report on the current industry state, and it reveals some interesting trends.
A Blast from the Past: Discovering an Ancient 3D Printer in a Modern Workshop
I encountered what I thought to be a rather ancient 3D printer last week.
Is it Possible to 3D Print PLA Bicycle Pedals that Meet CEN Standards?
Researchers at Michigan Technological University have been testing whether itās feasible to 3D print key bicycle parts using common PLA material.
Major Problems Ahead for 3D Model Repositories?
There could be a huge problem for 3D model repositories like Printables, Thingiverse, MyMiniFactory and others in the very near future.
Critical Video Published About Prusa Research: “Dear Prusa Researchā¦ We Need To Talk.”
A very controversial video has emerged directing strong criticism at Prusa Research.
Question of the Week: Where Are The Print Profiles?
This weekās question is all about print profiles for desktop FFF 3D printers.
Hands On With The LulzBot TAZ Sidekick 3D Printer, Part 3
Our hands on review of the LulzBot Sidekick 747 3D printer ends with a look at software, print results and final thoughts.
Thought 3D Expands Capabilities of Drywise In-line Filament Storage System
Thought 3D has been expanding the capabilities of their Drywise system.
Hands On With Simplify3D V5.0, Part 2
We complete our review of Simplify3D V5.0 with a look at previews, features, bugs and final thoughts.
Hands On With Simplify3D V5.0, Part 1
After a wait of several years, weāve got our hands on the latest version of Simplify3D.
Mango3D Introduces Lychee Slicer V5.0: FFF Printing Now Supported!
Mango3D announced V5.0 of the Lychee Slicer, but with a huge surprise: it handles FFF printing as well as resin 3D printing!
New AM Materials Round Up, November 22, 2022
Several new AM materials were announced in past weeks.
Hands On With Our Hands-On 3D Printing Reviews, 2022 Edition
An update to our comprehensive list of our hands on equipment, software and material reviews.
Create it REAL Releases Standalone Slicing Software Tool
Create it REAL seems to have switched strategies with their slicing software tool.
Markforged Links Slicing and Simulation
Markforged announced a very useful new feature for their Eiger software platform.
What Happens After We Reach The Bottom of Desktop 3D Printers?
Thereās often said to be a ārace to the bottomā with desktop 3D printers. What happens when we get there?
nano3Dprint launches B3300 Dual-Dispensing 3D Printer
The new B3300 is the latest electronics 3D printer from nano3Dprint.
We All Need A Slicing Profile Standard
Iām wondering why there isnāt a standard format for 3D print slicing profiles.
FDM vs FFF
Whatās the difference between āFDMā and āFFFā anyway?
An Easy Way To Start Non-Planar 3D Printing
I found a very easy way to start non-planar 3D printing.
Hands On With The Kingroon KP5L 3D Printer, Part 3
Our look at the Kingroon KP5L 3D printer concludes with a look at software, print quality and final thoughts.
Hands On With a $189 3D Printer: The Anycubic Kobra Go, Part 2
Our test of the Kobra Go desktop 3D printer continues with a look at Setup, calibration and operations.
Hands On With The Sovol SV01 PRO 3D Printer, Part 3
Our testing of the Sovol SV01 Pro 3D printer concludes with a look at print quality and final thoughts.
Question of the Week: How To Use a Very Old 3D Printer
This weekās question is about how one might go about operating an ancient 3D printer.
Flashforge Moving Into Professional 3D Printers
Flashforge has introduced a new 3D printer thatās way out of their normal scope.
Hands on with the MINGDA Magician X 3D Printer, Part 3
Our test of the MINGDA Magician X desktop 3D printer finishes with a look at software, print quality and final thoughts.
The nano3Dprint A2200 3D Multimaterials Electronic Printer
You likely havenāt heard of nano3Dprintās A2200 3D Multimaterials electronic printer.
The Geeetech Mizar S 3D Printer
The Geeetech Mizar S has some unusual features for a low-cost desktop 3D printer.
A Closer Look at Thought3Dās Drywise System
I took a closer in-person look at Thought3Dās new Drywise filament drying solution.