news Archives « Page 7 of 64

Depolymerizable 3D Printer Resin Enables Repeated Recycling of3D Prints

There’s a 3D printer resin that can apparently be reused, over and over.

Creality Patents Better 3D Printer Feet

Creality appears to be looking at an overlooked 3D printer component: the foot.

Additive Manufacturing in Equestrian Design: Transforming Horse Equipment Through 3D Printing

Charles Goulding and Lia Palumbo explore how 3D printing, scanning, and digital design are advancing equestrian equipment and equine care through customized tack, hoofwear, veterinary models, and safety-focused components.

Orthopedic AM To Bioprinting: A 2030–2050 Outlook

A new academic roadmap lays out how orthopedic 3D printing could evolve into clinical bioprinting by 2050 — and what must happen along the way.

Helio Additive Brings Print Optimization Simulation to OrcaSlicer

Helio Additive has now integrated with OrcaSlicer.

Prevent 3D Print Failures from Filament Tangles with the Automatic Filament Cutter

A new filament accessory could save many failed 3D prints.

Patent For Smarter FFF Failure Recovery

A Chinese patent application describes a way to make FFF printers recover more intelligently from nozzle clogs and filament breaks.

Korea-Kraze: How K-Style Has Become a Cultural and Industrial Phenomenon

Charles R. Goulding and Preeti Sulibhavi discuss how South Korea’s fierce competitiveness and economic strength are fueling a new era of cultural prestige and industrial dominance worldwide.

EPFL Demonstrates Overprinting With Tomographic Volumetric AM

EPFL researchers have shown fast, accurate overprinting in tomographic volumetric additive manufacturing, placing new features around real parts and inside sealed chips using open-source software.

Lightmake Introduces L4 System Combining Four Active Print Heads in a Single FFF 3D Printer

Startup company Lightmake proposes a new form of waste-free FFF 3D printing.

Formlabs Emerges as a Leading Private 3D Printing Company After Recent Disclosure

We now know a bit more about the secretive business of Formlabs.

Bambu Lab Fails to Invalidate Stratasys Purge Tower Patent in U.S. Patent Office Ruling

Bambu Lab just lost a case against Stratasys. What does this mean?

Design of the Week: FIFA World Cup Trophy

This week’s selection is the FIFA World Cup Trophy by Printables contributor santiis2010.

Researchers Optimize Multi-Head FFF Bonding

A new study examines how to make multiple FFF printheads build the same part without creating weak seams — a critical step toward “collective” printing.

Who’s The Biggest In 3D Printing, June 13, 2026

Once again we take a look at the valuations of the major 3D printing companies over the past week.

Frida-Mania Returns: Why Frida Kahlo Still Captivates Museums, Media, and Makers

Charles R. Goulding and Preeti Sulibhavi illustrate how the renewed global fascination with Frida Kahlo is creating unexpected opportunities for 3D printing in medical design, museum experiences, fashion, and collectible art.

Full Color Printing Expands in Desktop FFF, But Some Major Manufacturers are AWOL

The new “full colour” capabilities to FFF 3D printing are creating some interesting reactions.

Chinese Patent Describes Adjustable FFF Nozzle

A newly granted Chinese utility patent proposes a variable extrusion head for FFF 3D printers, aimed at avoiding one of the oldest annoyances in desktop and industrial extrusion printing: changing nozzles.

ORNL Uses Additive Manufacturing to Reduce Costs for Small-Scale Hydroelectric Installations

ORNL has been working on an interesting partnership to develop a 3D-printed micro-hydro system.

Luyten’s Tower Crane 3DCP System Capable of Printing Structures Up to 100 Meters

Luyten has produced a most unusual 3DCP printer.

Study Probes PLA and Wood Dust FFF Composites

Researchers evaluated how wood dust affects PLA parts printed by FFF, and the results could change how makers and manufacturers approach bio-filled filaments.

Google Releases Enables 3D Printed Fitbit Air Band Designs

Google has stepped into the world of 3D printing in a big way.

Selective SLA Curing Patent Targets Variable Properties

A patent application proposes a more selective way to post-cure stereolithography parts.

Self Cleaning Fan Patent Targets 3D Printer Cooling

A Chinese utility model patent proposes a simple way to keep 3D printer cooling fans from slowly degrading: clean the fan blades while they spin.

From Custom Prosthetics to Digital Care: Ottobock’s Latest 3D Printing Innovation Signals a Healthcare Shift

Charles R. Goulding and Preeti Sulibhavi examine how Ottobock’s new 3D printed silicone prosthetic liner reflects a broader movement toward mass-customized healthcare enabled by additive manufacturing and digital workflows.

Neural Shape Optimization Could Cut 3D Print Supports

A new neural field-based optimization method aims to reshape parts to reduce overhangs and, in turn, minimize the need for 3D printing support structures.

Meshy Launches 3D Agent Beta, Introducing Conversational AI Workflows for 3D Model Creation

Meshy announced a new agent capability.

Patent Suggests Low Cost Automated Part Removal

A new German patent application proposes a simpler way to automate part removal in 3D printers: use the motion system already inside the machine.

NeoSander Launches With Precision Sanding Features for Complex 3D Printed Parts

Need a way to sand detail areas on your 3D prints? There’s a tool for that.

Google and FANUC Want to Build the First Truly Intelligent Factory Robots

Charles R. Goulding and Preeti Sulibhavi analyze how AI-enabled FANUC robots could transform automation, additive manufacturing, and factory intelligence.

Study Probes 3D Printed Gyroid Implants For Bone

A new study evaluates the mechanical and biological behavior of 3D printed gyroid implants aimed at improving bone integration.

Formlabs Launches Fuse X1 SLS 3D Printer Targeting High-Volume Manufacturing Applications

Formlabs announced a major new 3D printer, the Fuse X1.

New ColorMix Shading Utility Applies Lighting-Based Color Effects to 3D Prints

Prusa Research just released one of the most interesting 3D print utilities: ColorMix Shading.

Flashforge Patent Targets Smarter Resin Peel Speeds

Flashforge appears to be looking at a smarter way to control resin 3D printing.

3D Printing the Nuclear Renaissance: How Additive Manufacturing Fuels the AI Power Grid and R&D Credits

Charles G. Goulding explains how the convergence of AI data center energy demands and advanced nuclear engineering has turned additive manufacturing into a critical pathway for securing lucrative Federal R&D Tax Credits.

Interpretable FFF Model Predicts Print Time And Filament

A team has proposed an interpretable machine learning approach that predicts print time and filament use for FFF, potentially sharpening quotes, schedules, and configuration decisions before you slice.

TOP.E To Launch Large, Enclosed 5-Axis FFF 3D Printer

A new five-axis FFF 3D printer is set to appear on Kickstarter soon.

HKUST Patent Targets Multi Directional DLP Coating

Hong Kong University of Science and Technology has filed a patent for a DLP 3D printer that uses multi-directional coating to handle more difficult photopolymer materials.

MyMiniFactory Outlines Strategy to Revive Thingiverse with New Features

Things are about to happen on Thingiverse.

Design of the Week: The Flapulator

This week’s selection is the The Flapulator by MakerWorld contributor Dr. Chris Haynes (a.k.a. Applepie).

Friction Stir Welding Boosts LPBF Copper Performance

Researchers show friction stir welding can join LPBF CuNiSiCr copper alloy while nearly eliminating porosity and lifting strength, hinting at a workable path to larger, higher performing thermal hardware.

Who’s The Biggest In 3D Printing, June 7, 2026

Once again we take a look at the valuations of the major 3D printing companies over the past week.

From Courtroom to Clean Water: The PFAS Crisis Creating New Opportunities for 3D Printing

Charles R. Goulding and Preeti Sulibhavi explore how landmark PFAS litigation, municipal filtration projects, and emerging 3D printed water treatment technologies are reshaping the global fight against “forever chemicals.”

AI-Generated 3D Content Gains Strategic Importance as Tripo Raises US$200M

Tripo just received US$200M, and there’s a reason for that.

Cura’s Role Shrinks as PrusaSlicer-Derived Tools Dominate FFF Printing Software

The FFF slicing tool market has consolidated, and not around Cura.

3D Systems Patent a New Way to Align Printheads

3D Systems has published a European patent application for a printhead mounting and alignment system that could make multi printhead 3D printers easier to calibrate.

New Hollow Filament Design Could Enable Conductive Paths

There’s an interesting proposal to produce “hollow filament”.

Paper Proposes Multifunctional 3D Robot For Kitchen Waste

A new research paper describes a multifunctional “3D robot” aimed at kitchen waste recycling.

Flashforge Introduces High-Resolution WJ51C Wax Printer

Flashforge announced a new 3D printer for the jewellery industry: the WJ51C wax printer.

Prusament Resin Model+ Enables Faster, Safer SLA

Prusa has updated its flagship resin into “Model+”, for faster prints, tougher parts, and a safer chemistry without making the material harder to use.

TNO Patents a Multi Material Semi Solid Extrusion

TNO has published a patent application describing a compact printhead for multi material semi solid extrusion.

CarboWells: 3D Printed Concrete Meets the Challenge of Leaking Oil Wells

Charles R. Goulding and Preeti Sulibhavi report on the Y-Prize-winning CarboWells concept, which combines advanced materials and 3D printing to improve the long-term safety of abandoned oil wells.

Single Screw Extruder Targets ABS Carbon Kevlar Filament

A new paper describes a single screw extruder concept for producing ABS composite filament reinforced with carbon and Kevlar fibers, a combination that could deliver tougher, stiffer feedstock for FFF users.

Hands On with the Mintion 3D Printer Filtration System V1

We’ve been testing the new 3D Printer Filtration System V1 from Mintion.

Kumovis Patents Smoother Porous Implants

Kumovis has a new European patent application that digs into a very specific FFF problem: how to print parts with regions that transform smoothly from porous to solid.

ELEGOO Develops Faster FFF Nozzle Switching System

A new ELEGOO patent application describes a mechanical approach to making multi nozzle FFF 3D printers easier to set up and switch.

Federal Additive Manufacturing Construction Moves From Experiment to Deployment: Key Insights From the AMC Webinar

Charles R. Goulding and Preeti Sulibhavi break down how federal additive manufacturing is moving from concept to battlefield-ready infrastructure, where 3D printed concrete and earth-based materials could soon replace tents with hardened, rapidly built military structures.

Chemnitz Team Uses AI To Control FFF Flow

Chemnitz researchers just showed a low cost, vision and AI approach that models and controls Fused Filament Fabrication (FFF) extrusion to improve accuracy without endless slicer tweaks.

Timeline: The Stratasys, Nano Dimension, Desktop Metal, and Markforged Merger Saga

Let’s look at the timeline of the startling corporate moves involving Stratasys and Nano Dimension.

Prusa Open-Sources ColorMix For Dozens Of Tones

Prusa Research has added an open-source “ColorMix” workflow to PrusaSlicer and EasyPrint that can turn a handful of loaded filaments into dozens of visible color tones.

Shining 3D Patent Introduces Sealed Resin Printing

There’s a new patent for a resin 3D printing method that tries to handle high viscosity materials without slowing the job.

Plastic, Petrochemicals, and the 3D Printing Industry’s Role in a Growing Global Challenge

Charles R. Goulding and Preeti Sulibhavi take a closer look at how the growing global plastics crisis is colliding with the future of manufacturing, and why the 3D printing industry may become part of the solution rather than part of the problem.

Multiscale 3D-Printed Knits Show Tunable Mechanics

A new research paper reports multiscale 3D printed knits that use entanglement to deliver programmable mechanical responses.

Bambu Lab Unveils A2L Large-Format Desktop 3D Printer

Bambu Lab announced a new and larger desktop FFF 3D printer, the A2L.

New York’s New 3D Printing Legislation Raises Questions About Feasibility

It happened last week: New York State actually passed their unbelievably infeasible 3D-printed weapon legislation.

Creality Reveals KliTek Nozzle-Swapping System

Creality has joined the no-waste 3D printing club with the surprise announcement of “KliTek”.

Design of the Week: Manual

This week’s selection is “Manual”, a 3D printed book by Hyperpress.

Study Flags FFF Filament Uniformity For Electrodes

A new study digs into how Fused Filament Fabrication (FFF) changes the performance of carbon-loaded plastics used as 3D printed electrodes.

Who’s The Biggest In 3D Printing, May 31, 2026

Once again we take a look at the valuations of the major 3D printing companies over the past week.

How do Israel-UAE 3D Printing Partnerships Drive Section 41 R&D Tax Credit Eligibility?

Charles R. Goulding and Aaron Rofe analyze how the strengthening Israel-UAE relationship is forging a strategic regional ecosystem centered on additive manufacturing and industrial supply chain resilience.

Steakholder Foods Plans US Launch of Perfecta 3D-Printed Plant-Based Meat Products

Some news from Steakholder Foods: they are launching a new product in the US.

Chinese Patent Targets Combined 3D Printer Plotter

A newly published Chinese patent application describes a machine that can switch between FFF 3D printing and pen-based writing or drawing without manual toolhead replacement.

Atum3D and AMSYSTEMS Merge to Form Atum Systems

A small corporate merger in the 3D print world took place this week.

EOS Patent Targets Higher SLS Powder Reuse

EOS has filed a patent application that could make polymer powder reuse in SLS more efficient.

Study Tests Recycled FGF Polymers For Dental Models

A new paper proposes that pellet-based Fused Granular Fabrication using recycled polymers, which could make dental and orthodontic models cheaper and greener.

Building Codes and Regulation May Determine the Future Growth of 3D Printed Construction

Regulation may be the least fun part of 3D printed construction, but it determines whether 3DCP can move past demonstrations.

Canon Patent Targets Easier Inkjet Support Removal

Canon Production Printing has filed a European patent application for a different way to remove support material from UV inkjet 3D printed structures.

Recyclable Resin Could Bring Sustainability To High Resolution SLA

Researchers have developed a recyclable photopolymer resin that can be printed, melted, and printed again.

Polymesh and the New Geometry of Watchmaking in MING’s 3D Printed Titanium Strap

Charles R. Goulding and Nimra Shakoor spotlight how MING’s 3D printed titanium Polymesh strap leverages sub-70-micron additive manufacturing and complex lattice geometries to redefine luxury watchmaking while qualifying for significant R&D Tax Credits.

NTU 3D Prints Self-Sensing Soft Continuum Robot

Researchers at Nanyang Technological University have 3D printed sacrificial molds to create a self-sensing soft continuum robot that reconstructs its shape with machine learning.

Ten Potential Disruptions That Could Reshape the 3D Printing Industry

What developments in 3D printing could truly disrupt the industry?

Phase Light Modulators Could Make Volumetric 3D Printing Far More Practical

Researchers have shown a much more efficient holographic approach to volumetric 3D printing.

Trinckle Patents User Guided 3D Printing Configuration

Trinckle 3D has published a pair of German patent applications that point toward a very specific problem in additive manufacturing: how do you let less experienced users customize 3D printed parts without letting them break the part?

Hubbell’s US$3 Billion NSI Industries Acquisition Could Reshape Electrical Infrastructure and Lighting

Charles R. Goulding and Preeti Sulibhavi examine how Hubbell’s $3 billion acquisition of NSI Industries and the integration of 3D printing technology signal a transformative era for electrical infrastructure innovation and R&D Tax Credit opportunities.